Merge branch 'randconfig/mach' into fixes

Small platform specific bug fixes for problems found in randconfig builds.

* randconfig/mach:
  ARM: ux500: don't select LEDS_GPIO for snowball
  ARM: imx: build i.MX6 functions only when needed
  ARM: imx: select CPU_FREQ_TABLE when needed
  ARM: imx: fix ksz9021rn_phy_fixup
  ARM: imx: build pm-imx5 code only when PM is enabled
  ARM: omap: allow building omap44xx without SMP
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

arch/arm/Kconfig

@@ -2150,6 +2150,7 @@ source "drivers/cpufreq/Kconfig"
 config CPU_FREQ_IMX
 	tristate "CPUfreq driver for i.MX CPUs"
 	depends on ARCH_MXC && CPU_FREQ
+	select CPU_FREQ_TABLE
 	help
 	  This enables the CPUfreq driver for i.MX CPUs.
 

arch/arm/configs/u8500_defconfig

@@ -86,6 +86,7 @@ CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_LM3530=y
 CONFIG_LEDS_LP5521=y
+CONFIG_LEDS_GPIO=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AB8500=y
 CONFIG_RTC_DRV_PL031=y

arch/arm/mach-imx/Makefile

@@ -9,7 +9,8 @@ obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o
 obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o
 obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o
 
-obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o
+imx5-pm-$(CONFIG_PM) += pm-imx5.o
+obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) cpu_op-mx51.o
 
 obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
 			    clk-pfd.o clk-busy.o
@@ -70,14 +71,13 @@ obj-$(CONFIG_DEBUG_LL) += lluart.o
 obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
 obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
 obj-$(CONFIG_HAVE_IMX_SRC) += src.o
-obj-$(CONFIG_CPU_V7) += head-v7.o
-AFLAGS_head-v7.o :=-Wa,-march=armv7-a
-obj-$(CONFIG_SMP) += platsmp.o
+AFLAGS_headsmp.o :=-Wa,-march=armv7-a
+obj-$(CONFIG_SMP) += headsmp.o platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
 obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o
 
 ifeq ($(CONFIG_PM),y)
-obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o
+obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o
 endif
 
 # i.MX5 based machines

arch/arm/mach-imx/mach-imx6q.c

@@ -71,7 +71,7 @@ void imx6q_restart(char mode, const char *cmd)
 /* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */
 static int ksz9021rn_phy_fixup(struct phy_device *phydev)
 {
-	if (IS_ENABLED(CONFIG_PHYLIB)) {
+	if (IS_BUILTIN(CONFIG_PHYLIB)) {
 		/* min rx data delay */
 		phy_write(phydev, 0x0b, 0x8105);
 		phy_write(phydev, 0x0c, 0x0000);
@@ -112,7 +112,7 @@ static void __init imx6q_sabrelite_cko1_setup(void)
 
 static void __init imx6q_sabrelite_init(void)
 {
-	if (IS_ENABLED(CONFIG_PHYLIB))
+	if (IS_BUILTIN(CONFIG_PHYLIB))
 		phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
 				ksz9021rn_phy_fixup);
 	imx6q_sabrelite_cko1_setup();

arch/arm/mach-omap2/Kconfig

@@ -62,7 +62,7 @@ config ARCH_OMAP4
 	select PM_OPP if PM
 	select USB_ARCH_HAS_EHCI if USB_SUPPORT
 	select ARM_CPU_SUSPEND if PM
-	select ARCH_NEEDS_CPU_IDLE_COUPLED
+	select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
 
 config SOC_OMAP5
 	bool "TI OMAP5"

arch/arm/mach-omap2/cpuidle44xx.c

@@ -238,8 +238,9 @@ int __init omap4_idle_init(void)
 	for_each_cpu(cpu_id, cpu_online_mask) {
 		dev = &per_cpu(omap4_idle_dev, cpu_id);
 		dev->cpu = cpu_id;
+#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
 		dev->coupled_cpus = *cpu_online_mask;
-
+#endif
 		cpuidle_register_driver(&omap4_idle_driver);
 
 		if (cpuidle_register_device(dev)) {

arch/arm/mach-ux500/Kconfig

@@ -41,7 +41,6 @@ config MACH_HREFV60
 config MACH_SNOWBALL
 	bool "U8500 Snowball platform"
 	select MACH_MOP500
-	select LEDS_GPIO
 	help
 	  Include support for the snowball development platform.
 

include/linux/cpuidle.h

@@ -194,6 +194,10 @@ static inline int cpuidle_play_dead(void) {return -ENODEV; }
 
 #ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
 void cpuidle_coupled_parallel_barrier(struct cpuidle_device *dev, atomic_t *a);
+#else
+static inline void cpuidle_coupled_parallel_barrier(struct cpuidle_device *dev, atomic_t *a)
+{
+}
 #endif
 
 /******************************