提交 54f4ee18 编写于 作者: H Hollis Blanchard 提交者: Paul Mackerras

[PATCH] powerpc: fix RTC/NVRAM accesses on Maple

Due to a firmware device tree bug, RTC and NVRAM accesses (including
halt/reboot) on Maple have been broken since January, when an untested
build fix went in. This code patches the device tree in Linux.
Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NSegher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
上级 8e30a9a2
......@@ -2057,10 +2057,45 @@ static void __init flatten_device_tree(void)
}
static void __init fixup_device_tree(void)
#ifdef CONFIG_PPC_MAPLE
/* PIBS Version 1.05.0000 04/26/2005 has an incorrect /ht/isa/ranges property.
* The values are bad, and it doesn't even have the right number of cells. */
static void __init fixup_device_tree_maple(void)
{
phandle isa;
u32 isa_ranges[6];
isa = call_prom("finddevice", 1, 1, ADDR("/ht@0/isa@4"));
if (!PHANDLE_VALID(isa))
return;
if (prom_getprop(isa, "ranges", isa_ranges, sizeof(isa_ranges))
== PROM_ERROR)
return;
if (isa_ranges[0] != 0x1 ||
isa_ranges[1] != 0xf4000000 ||
isa_ranges[2] != 0x00010000)
return;
prom_printf("fixing up bogus ISA range on Maple...\n");
isa_ranges[0] = 0x1;
isa_ranges[1] = 0x0;
isa_ranges[2] = 0x01002000; /* IO space; PCI device = 4 */
isa_ranges[3] = 0x0;
isa_ranges[4] = 0x0;
isa_ranges[5] = 0x00010000;
prom_setprop(isa, "/ht@0/isa@4", "ranges",
isa_ranges, sizeof(isa_ranges));
}
#else
#define fixup_device_tree_maple()
#endif
#if defined(CONFIG_PPC64) && defined(CONFIG_PPC_PMAC)
static void __init fixup_device_tree_pmac(void)
{
phandle u3, i2c, mpic;
u32 u3_rev;
u32 interrupts[2];
......@@ -2097,9 +2132,16 @@ static void __init fixup_device_tree(void)
parent = (u32)mpic;
prom_setprop(i2c, "/u3@0,f8000000/i2c@f8001000", "interrupt-parent",
&parent, sizeof(parent));
#endif
}
#else
#define fixup_device_tree_pmac()
#endif
static void __init fixup_device_tree(void)
{
fixup_device_tree_maple();
fixup_device_tree_pmac();
}
static void __init prom_find_boot_cpu(void)
{
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册