drm/omap: omap_display_timings: Use display_flags for interlace mode

Remove the interlace member and add display_flags to omap_video_timings to
configure the interlace mode.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

drivers/gpu/drm/omapdrm/displays/connector-analog-tv.c

@@ -40,7 +40,7 @@ static const struct omap_video_timings tvc_pal_timings = {
 	.vfront_porch	= 5,
 	.vback_porch	= 41,
 
-	.interlace	= true,
+	.flags		= DISPLAY_FLAGS_INTERLACED,
 };
 
 static const struct of_device_id tvc_of_match[];

drivers/gpu/drm/omapdrm/displays/connector-hdmi.c

@@ -34,8 +34,6 @@ static const struct omap_video_timings hdmic_default_timings = {
 
 	.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
 	.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-
-	.interlace	= false,
 };
 
 struct panel_drv_data {

drivers/gpu/drm/omapdrm/dss/dispc.c

@@ -2607,7 +2607,7 @@ static int dispc_ovl_setup_common(enum omap_plane plane,
 	u16 in_height = height;
 	u16 in_width = width;
 	int x_predecim = 1, y_predecim = 1;
-	bool ilace = mgr_timings->interlace;
+	bool ilace = !!(mgr_timings->flags & DISPLAY_FLAGS_INTERLACED);
 	unsigned long pclk = dispc_plane_pclk_rate(plane);
 	unsigned long lclk = dispc_plane_lclk_rate(plane);
 
@@ -3128,7 +3128,7 @@ bool dispc_mgr_timings_ok(enum omap_channel channel,
 
 	if (dss_mgr_is_lcd(channel)) {
 		/* TODO: OMAP4+ supports interlace for LCD outputs */
-		if (timings->interlace)
+		if (timings->flags & DISPLAY_FLAGS_INTERLACED)
 			return false;
 
 		if (!_dispc_lcd_timings_ok(timings->hsync_len,
@@ -3292,7 +3292,7 @@ void dispc_mgr_set_timings(enum omap_channel channel,
 
 		DSSDBG("hsync %luHz, vsync %luHz\n", ht, vt);
 	} else {
-		if (t.interlace)
+		if (t.flags & DISPLAY_FLAGS_INTERLACED)
 			t.vactive /= 2;
 
 		if (dispc.feat->supports_double_pixel)
@@ -4232,7 +4232,6 @@ static const struct dispc_errata_i734_data {
 		.vsync_len = 1, .vfront_porch = 1, .vback_porch = 1,
 		.vsync_level = OMAPDSS_SIG_ACTIVE_LOW,
 		.hsync_level = OMAPDSS_SIG_ACTIVE_LOW,
-		.interlace = false,
 		.data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE,
 		.de_level = OMAPDSS_SIG_ACTIVE_HIGH,
 		.sync_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE,

drivers/gpu/drm/omapdrm/dss/dsi.c

@@ -4122,7 +4122,7 @@ static int dsi_display_init_dispc(struct platform_device *dsidev,
 	 * override interlace, logic level and edge related parameters in
 	 * omap_video_timings with default values
 	 */
-	dsi->timings.interlace = false;
+	dsi->timings.flags &= ~DISPLAY_FLAGS_INTERLACED;
 	dsi->timings.hsync_level = OMAPDSS_SIG_ACTIVE_HIGH;
 	dsi->timings.vsync_level = OMAPDSS_SIG_ACTIVE_HIGH;
 	dsi->timings.data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE;

drivers/gpu/drm/omapdrm/dss/hdmi5_core.c

@@ -303,7 +303,7 @@ static void hdmi_core_init(struct hdmi_core_vid_config *video_cfg,
 			    cfg->timings.vback_porch;
 	video_cfg->v_fc_config.hdmi_dvi_mode = cfg->hdmi_dvi_mode;
 
-	if (cfg->timings.interlace) {
+	if (cfg->timings.flags & DISPLAY_FLAGS_INTERLACED) {
 		/* set vblank_osc if vblank is fractional */
 		if (video_cfg->vblank % 2 != 0)
 			video_cfg->vblank_osc = 1;
@@ -342,7 +342,7 @@ static void hdmi_core_video_config(struct hdmi_core_data *core,
 	r = FLD_MOD(r, hsync_pol, 5, 5);
 	r = FLD_MOD(r, cfg->data_enable_pol, 4, 4);
 	r = FLD_MOD(r, cfg->vblank_osc, 1, 1);
-	r = FLD_MOD(r, ovt->interlace, 0, 0);
+	r = FLD_MOD(r, !!(ovt->flags & DISPLAY_FLAGS_INTERLACED), 0, 0);
 	hdmi_write_reg(base, HDMI_CORE_FC_INVIDCONF, r);
 
 	/* set x resolution */

drivers/gpu/drm/omapdrm/dss/hdmi_wp.c

@@ -156,7 +156,7 @@ void hdmi_wp_video_config_interface(struct hdmi_wp_data *wp,
 	r = hdmi_read_reg(wp->base, HDMI_WP_VIDEO_CFG);
 	r = FLD_MOD(r, vsync_pol, 7, 7);
 	r = FLD_MOD(r, hsync_pol, 6, 6);
-	r = FLD_MOD(r, timings->interlace, 3, 3);
+	r = FLD_MOD(r, !!(timings->flags & DISPLAY_FLAGS_INTERLACED), 3, 3);
 	r = FLD_MOD(r, 1, 1, 0); /* HDMI_TIMING_MASTER_24BIT */
 	hdmi_write_reg(wp->base, HDMI_WP_VIDEO_CFG, r);
 }
@@ -210,10 +210,10 @@ void hdmi_wp_init_vid_fmt_timings(struct hdmi_video_format *video_fmt,
 
 	timings->vsync_level = param->timings.vsync_level;
 	timings->hsync_level = param->timings.hsync_level;
-	timings->interlace = param->timings.interlace;
 	timings->double_pixel = param->timings.double_pixel;
+	timings->flags = param->timings.flags;
 
-	if (param->timings.interlace) {
+	if (param->timings.flags & DISPLAY_FLAGS_INTERLACED) {
 		video_fmt->y_res /= 2;
 		timings->vback_porch /= 2;
 		timings->vfront_porch /= 2;

drivers/gpu/drm/omapdrm/dss/omapdss.h

@@ -323,8 +323,6 @@ struct omap_video_timings {
 	enum omap_dss_signal_level vsync_level;
 	/* Hsync logic level */
 	enum omap_dss_signal_level hsync_level;
-	/* Interlaced or Progressive timings */
-	bool interlace;
 	/* Pixel clock edge to drive LCD data */
 	enum omap_dss_signal_edge data_pclk_edge;
 	/* Data enable logic level */
@@ -333,6 +331,8 @@ struct omap_video_timings {
 	enum omap_dss_signal_edge sync_pclk_edge;
 
 	bool double_pixel;
+
+	enum display_flags flags;
 };
 
 /* Hardcoded timings for tv modes. Venc only uses these to

drivers/gpu/drm/omapdrm/dss/rfbi.c

@@ -865,7 +865,7 @@ static void rfbi_config_lcd_manager(struct omap_dss_device *dssdev)
 	rfbi.timings.vfront_porch = 0;
 	rfbi.timings.vback_porch = 0;
 
-	rfbi.timings.interlace = false;
+	rfbi.timings.flags &= ~DISPLAY_FLAGS_INTERLACED;
 	rfbi.timings.hsync_level = OMAPDSS_SIG_ACTIVE_HIGH;
 	rfbi.timings.vsync_level = OMAPDSS_SIG_ACTIVE_HIGH;
 	rfbi.timings.data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE;

drivers/gpu/drm/omapdrm/dss/venc.c

@@ -273,13 +273,13 @@ const struct omap_video_timings omap_dss_pal_timings = {
 	.vfront_porch	= 5,
 	.vback_porch	= 41,
 
-	.interlace	= true,
-
 	.hsync_level = OMAPDSS_SIG_ACTIVE_LOW,
 	.vsync_level = OMAPDSS_SIG_ACTIVE_LOW,
 	.data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE,
 	.de_level = OMAPDSS_SIG_ACTIVE_HIGH,
 	.sync_pclk_edge = OMAPDSS_DRIVE_SIG_FALLING_EDGE,
+
+	.flags		= DISPLAY_FLAGS_INTERLACED,
 };
 EXPORT_SYMBOL(omap_dss_pal_timings);
 
@@ -294,13 +294,13 @@ const struct omap_video_timings omap_dss_ntsc_timings = {
 	.vfront_porch	= 6,
 	.vback_porch	= 31,
 
-	.interlace	= true,
-
 	.hsync_level = OMAPDSS_SIG_ACTIVE_LOW,
 	.vsync_level = OMAPDSS_SIG_ACTIVE_LOW,
 	.data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE,
 	.de_level = OMAPDSS_SIG_ACTIVE_HIGH,
 	.sync_pclk_edge = OMAPDSS_DRIVE_SIG_FALLING_EDGE,
+
+	.flags		= DISPLAY_FLAGS_INTERLACED,
 };
 EXPORT_SYMBOL(omap_dss_ntsc_timings);
 

drivers/gpu/drm/omapdrm/omap_connector.c

@@ -59,7 +59,7 @@ void copy_timings_omap_to_drm(struct drm_display_mode *mode,
 
 	mode->flags = 0;
 
-	if (timings->interlace)
+	if (timings->flags & DISPLAY_FLAGS_INTERLACED)
 		mode->flags |= DRM_MODE_FLAG_INTERLACE;
 
 	if (timings->double_pixel)
@@ -91,7 +91,9 @@ void copy_timings_drm_to_omap(struct omap_video_timings *timings,
 	timings->vsync_len = mode->vsync_end - mode->vsync_start;
 	timings->vback_porch = mode->vtotal - mode->vsync_end;
 
-	timings->interlace = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
+	if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+		timings->flags |= DISPLAY_FLAGS_INTERLACED;
+
 	timings->double_pixel = !!(mode->flags & DRM_MODE_FLAG_DBLCLK);
 
 	if (mode->flags & DRM_MODE_FLAG_PHSYNC)