Input: i8042 - use pr_<level>, pr_fmt, fix dbg and __FILE__ use

Standardized message logging prefixes.
Removed \n from dbg macro, added \n to each dbg call site.
Removed direct use of __FILE__ from dbg, converted to pr_fmt(fmt)
Added non-debug printf argument verification of dbg calls
Removed "i8042.c" from printks, converted to pr_<level>
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

drivers/input/serio/i8042-x86ia64io.h

@@ -752,7 +752,7 @@ static int __init i8042_pnp_init(void)
 #endif
 
 	if (i8042_nopnp) {
-		printk(KERN_INFO "i8042: PNP detection disabled\n");
+		pr_info("PNP detection disabled\n");
 		return 0;
 	}
 
@@ -769,7 +769,7 @@ static int __init i8042_pnp_init(void)
 #if defined(__ia64__)
 		return -ENODEV;
 #else
-		printk(KERN_INFO "PNP: No PS/2 controller found. Probing ports directly.\n");
+		pr_info("PNP: No PS/2 controller found. Probing ports directly.\n");
 		return 0;
 #endif
 	}
@@ -781,7 +781,7 @@ static int __init i8042_pnp_init(void)
 		snprintf(aux_irq_str, sizeof(aux_irq_str),
 			"%d", i8042_pnp_aux_irq);
 
-	printk(KERN_INFO "PNP: PS/2 Controller [%s%s%s] at %#x,%#x irq %s%s%s\n",
+	pr_info("PNP: PS/2 Controller [%s%s%s] at %#x,%#x irq %s%s%s\n",
 		i8042_pnp_kbd_name, (i8042_pnp_kbd_devices && i8042_pnp_aux_devices) ? "," : "",
 		i8042_pnp_aux_name,
 		i8042_pnp_data_reg, i8042_pnp_command_reg,
@@ -798,9 +798,7 @@ static int __init i8042_pnp_init(void)
 	if (((i8042_pnp_data_reg & ~0xf) == (i8042_data_reg & ~0xf) &&
 	      i8042_pnp_data_reg != i8042_data_reg) ||
 	    !i8042_pnp_data_reg) {
-		printk(KERN_WARNING
-			"PNP: PS/2 controller has invalid data port %#x; "
-			"using default %#x\n",
+		pr_warn("PNP: PS/2 controller has invalid data port %#x; using default %#x\n",
 			i8042_pnp_data_reg, i8042_data_reg);
 		i8042_pnp_data_reg = i8042_data_reg;
 		pnp_data_busted = true;
@@ -809,33 +807,27 @@ static int __init i8042_pnp_init(void)
 	if (((i8042_pnp_command_reg & ~0xf) == (i8042_command_reg & ~0xf) &&
 	      i8042_pnp_command_reg != i8042_command_reg) ||
 	    !i8042_pnp_command_reg) {
-		printk(KERN_WARNING
-			"PNP: PS/2 controller has invalid command port %#x; "
-			"using default %#x\n",
+		pr_warn("PNP: PS/2 controller has invalid command port %#x; using default %#x\n",
 			i8042_pnp_command_reg, i8042_command_reg);
 		i8042_pnp_command_reg = i8042_command_reg;
 		pnp_data_busted = true;
 	}
 
 	if (!i8042_nokbd && !i8042_pnp_kbd_irq) {
-		printk(KERN_WARNING
-			"PNP: PS/2 controller doesn't have KBD irq; "
-			"using default %d\n", i8042_kbd_irq);
+		pr_warn("PNP: PS/2 controller doesn't have KBD irq; using default %d\n",
+			i8042_kbd_irq);
 		i8042_pnp_kbd_irq = i8042_kbd_irq;
 		pnp_data_busted = true;
 	}
 
 	if (!i8042_noaux && !i8042_pnp_aux_irq) {
 		if (!pnp_data_busted && i8042_pnp_kbd_irq) {
-			printk(KERN_WARNING
-				"PNP: PS/2 appears to have AUX port disabled, "
-				"if this is incorrect please boot with "
-				"i8042.nopnp\n");
+			pr_warn("PNP: PS/2 appears to have AUX port disabled, "
+				"if this is incorrect please boot with i8042.nopnp\n");
 			i8042_noaux = true;
 		} else {
-			printk(KERN_WARNING
-				"PNP: PS/2 controller doesn't have AUX irq; "
-				"using default %d\n", i8042_aux_irq);
+			pr_warn("PNP: PS/2 controller doesn't have AUX irq; using default %d\n",
+				i8042_aux_irq);
 			i8042_pnp_aux_irq = i8042_aux_irq;
 		}
 	}

drivers/input/serio/i8042.c

@@ -10,6 +10,8 @@
  * the Free Software Foundation.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/types.h>
 #include <linux/delay.h>
 #include <linux/module.h>
@@ -225,8 +227,8 @@ static int i8042_flush(void)
 		udelay(50);
 		data = i8042_read_data();
 		i++;
-		dbg("%02x <- i8042 (flush, %s)", data,
-			str & I8042_STR_AUXDATA ? "aux" : "kbd");
+		dbg("%02x <- i8042 (flush, %s)\n",
+		    data, str & I8042_STR_AUXDATA ? "aux" : "kbd");
 	}
 
 	spin_unlock_irqrestore(&i8042_lock, flags);
@@ -253,32 +255,32 @@ static int __i8042_command(unsigned char *param, int command)
 	if (error)
 		return error;
 
-	dbg("%02x -> i8042 (command)", command & 0xff);
+	dbg("%02x -> i8042 (command)\n", command & 0xff);
 	i8042_write_command(command & 0xff);
 
 	for (i = 0; i < ((command >> 12) & 0xf); i++) {
 		error = i8042_wait_write();
 		if (error)
 			return error;
-		dbg("%02x -> i8042 (parameter)", param[i]);
+		dbg("%02x -> i8042 (parameter)\n", param[i]);
 		i8042_write_data(param[i]);
 	}
 
 	for (i = 0; i < ((command >> 8) & 0xf); i++) {
 		error = i8042_wait_read();
 		if (error) {
-			dbg("     -- i8042 (timeout)");
+			dbg("     -- i8042 (timeout)\n");
 			return error;
 		}
 
 		if (command == I8042_CMD_AUX_LOOP &&
 		    !(i8042_read_status() & I8042_STR_AUXDATA)) {
-			dbg("     -- i8042 (auxerr)");
+			dbg("     -- i8042 (auxerr)\n");
 			return -1;
 		}
 
 		param[i] = i8042_read_data();
-		dbg("%02x <- i8042 (return)", param[i]);
+		dbg("%02x <- i8042 (return)\n", param[i]);
 	}
 
 	return 0;
@@ -309,7 +311,7 @@ static int i8042_kbd_write(struct serio *port, unsigned char c)
 	spin_lock_irqsave(&i8042_lock, flags);
 
 	if (!(retval = i8042_wait_write())) {
-		dbg("%02x -> i8042 (kbd-data)", c);
+		dbg("%02x -> i8042 (kbd-data)\n", c);
 		i8042_write_data(c);
 	}
 
@@ -355,17 +357,14 @@ static void i8042_port_close(struct serio *serio)
 
 	i8042_ctr &= ~irq_bit;
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
-		printk(KERN_WARNING
-			"i8042.c: Can't write CTR while closing %s port.\n",
-			port_name);
+		pr_warn("Can't write CTR while closing %s port\n", port_name);
 
 	udelay(50);
 
 	i8042_ctr &= ~disable_bit;
 	i8042_ctr |= irq_bit;
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
-		printk(KERN_ERR "i8042.c: Can't reactivate %s port.\n",
-			port_name);
+		pr_err("Can't reactivate %s port\n", port_name);
 
 	/*
 	 * See if there is any data appeared while we were messing with
@@ -456,7 +455,8 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id)
 	str = i8042_read_status();
 	if (unlikely(~str & I8042_STR_OBF)) {
 		spin_unlock_irqrestore(&i8042_lock, flags);
-		if (irq) dbg("Interrupt %d, without any data", irq);
+		if (irq)
+			dbg("Interrupt %d, without any data\n", irq);
 		ret = 0;
 		goto out;
 	}
@@ -469,7 +469,8 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id)
 
 		dfl = 0;
 		if (str & I8042_STR_MUXERR) {
-			dbg("MUX error, status is %02x, data is %02x", str, data);
+			dbg("MUX error, status is %02x, data is %02x\n",
+			    str, data);
 /*
  * When MUXERR condition is signalled the data register can only contain
  * 0xfd, 0xfe or 0xff if implementation follows the spec. Unfortunately
@@ -512,7 +513,7 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id)
 	port = &i8042_ports[port_no];
 	serio = port->exists ? port->serio : NULL;
 
-	dbg("%02x <- i8042 (interrupt, %d, %d%s%s)",
+	dbg("%02x <- i8042 (interrupt, %d, %d%s%s)\n",
 	    data, port_no, irq,
 	    dfl & SERIO_PARITY ? ", bad parity" : "",
 	    dfl & SERIO_TIMEOUT ? ", timeout" : "");
@@ -540,7 +541,7 @@ static int i8042_enable_kbd_port(void)
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
 		i8042_ctr &= ~I8042_CTR_KBDINT;
 		i8042_ctr |= I8042_CTR_KBDDIS;
-		printk(KERN_ERR "i8042.c: Failed to enable KBD port.\n");
+		pr_err("Failed to enable KBD port\n");
 		return -EIO;
 	}
 
@@ -559,7 +560,7 @@ static int i8042_enable_aux_port(void)
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
 		i8042_ctr &= ~I8042_CTR_AUXINT;
 		i8042_ctr |= I8042_CTR_AUXDIS;
-		printk(KERN_ERR "i8042.c: Failed to enable AUX port.\n");
+		pr_err("Failed to enable AUX port\n");
 		return -EIO;
 	}
 
@@ -641,7 +642,7 @@ static int __init i8042_check_mux(void)
 	if (i8042_set_mux_mode(true, &mux_version))
 		return -1;
 
-	printk(KERN_INFO "i8042.c: Detected active multiplexing controller, rev %d.%d.\n",
+	pr_info("Detected active multiplexing controller, rev %d.%d\n",
 		(mux_version >> 4) & 0xf, mux_version & 0xf);
 
 /*
@@ -651,7 +652,7 @@ static int __init i8042_check_mux(void)
 	i8042_ctr &= ~I8042_CTR_AUXINT;
 
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
-		printk(KERN_ERR "i8042.c: Failed to disable AUX port, can't use MUX.\n");
+		pr_err("Failed to disable AUX port, can't use MUX\n");
 		return -EIO;
 	}
 
@@ -676,7 +677,7 @@ static irqreturn_t __init i8042_aux_test_irq(int irq, void *dev_id)
 	str = i8042_read_status();
 	if (str & I8042_STR_OBF) {
 		data = i8042_read_data();
-		dbg("%02x <- i8042 (aux_test_irq, %s)",
+		dbg("%02x <- i8042 (aux_test_irq, %s)\n",
 		    data, str & I8042_STR_AUXDATA ? "aux" : "kbd");
 		if (i8042_irq_being_tested &&
 		    data == 0xa5 && (str & I8042_STR_AUXDATA))
@@ -770,8 +771,8 @@ static int __init i8042_check_aux(void)
  */
 
 	if (i8042_toggle_aux(false)) {
-		printk(KERN_WARNING "Failed to disable AUX port, but continuing anyway... Is this a SiS?\n");
-		printk(KERN_WARNING "If AUX port is really absent please use the 'i8042.noaux' option.\n");
+		pr_warn("Failed to disable AUX port, but continuing anyway... Is this a SiS?\n");
+		pr_warn("If AUX port is really absent please use the 'i8042.noaux' option\n");
 	}
 
 	if (i8042_toggle_aux(true))
@@ -819,7 +820,7 @@ static int __init i8042_check_aux(void)
  * AUX IRQ was never delivered so we need to flush the controller to
  * get rid of the byte we put there; otherwise keyboard may not work.
  */
-		dbg("     -- i8042 (aux irq test timeout)");
+		dbg("     -- i8042 (aux irq test timeout)\n");
 		i8042_flush();
 		retval = -1;
 	}
@@ -845,7 +846,7 @@ static int __init i8042_check_aux(void)
 static int i8042_controller_check(void)
 {
 	if (i8042_flush() == I8042_BUFFER_SIZE) {
-		printk(KERN_ERR "i8042.c: No controller found.\n");
+		pr_err("No controller found\n");
 		return -ENODEV;
 	}
 
@@ -864,14 +865,14 @@ static int i8042_controller_selftest(void)
 	do {
 
 		if (i8042_command(&param, I8042_CMD_CTL_TEST)) {
-			printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n");
+			pr_err("i8042 controller self test timeout\n");
 			return -ENODEV;
 		}
 
 		if (param == I8042_RET_CTL_TEST)
 			return 0;
 
-		printk(KERN_ERR "i8042.c: i8042 controller selftest failed. (%#x != %#x)\n",
+		pr_err("i8042 controller selftest failed. (%#x != %#x)\n",
 		       param, I8042_RET_CTL_TEST);
 		msleep(50);
 	} while (i++ < 5);
@@ -883,8 +884,7 @@ static int i8042_controller_selftest(void)
 	 * and user will still get a working keyboard. This is especially
 	 * important on netbooks. On other arches we trust hardware more.
 	 */
-	printk(KERN_INFO
-		"i8042: giving up on controller selftest, continuing anyway...\n");
+	pr_info("giving up on controller selftest, continuing anyway...\n");
 	return 0;
 #else
 	return -EIO;
@@ -909,8 +909,7 @@ static int i8042_controller_init(void)
 
 	do {
 		if (n >= 10) {
-			printk(KERN_ERR
-				"i8042.c: Unable to get stable CTR read.\n");
+			pr_err("Unable to get stable CTR read\n");
 			return -EIO;
 		}
 
@@ -918,8 +917,7 @@ static int i8042_controller_init(void)
 			udelay(50);
 
 		if (i8042_command(&ctr[n++ % 2], I8042_CMD_CTL_RCTR)) {
-			printk(KERN_ERR
-				"i8042.c: Can't read CTR while initializing i8042.\n");
+			pr_err("Can't read CTR while initializing i8042\n");
 			return -EIO;
 		}
 
@@ -943,7 +941,7 @@ static int i8042_controller_init(void)
 		if (i8042_unlock)
 			i8042_ctr |= I8042_CTR_IGNKEYLOCK;
 		else
-			printk(KERN_WARNING "i8042.c: Warning: Keylock active.\n");
+			pr_warn("Warning: Keylock active\n");
 	}
 	spin_unlock_irqrestore(&i8042_lock, flags);
 
@@ -970,7 +968,7 @@ static int i8042_controller_init(void)
  */
 
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
-		printk(KERN_ERR "i8042.c: Can't write CTR while initializing i8042.\n");
+		pr_err("Can't write CTR while initializing i8042\n");
 		return -EIO;
 	}
 
@@ -1000,7 +998,7 @@ static void i8042_controller_reset(void)
 	i8042_ctr &= ~(I8042_CTR_KBDINT | I8042_CTR_AUXINT);
 
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
-		printk(KERN_WARNING "i8042.c: Can't write CTR while resetting.\n");
+		pr_warn("Can't write CTR while resetting\n");
 
 /*
  * Disable MUX mode if present.
@@ -1021,7 +1019,7 @@ static void i8042_controller_reset(void)
  */
 
 	if (i8042_command(&i8042_initial_ctr, I8042_CMD_CTL_WCTR))
-		printk(KERN_WARNING "i8042.c: Can't restore CTR.\n");
+		pr_warn("Can't restore CTR\n");
 }
 
 
@@ -1045,14 +1043,14 @@ static long i8042_panic_blink(int state)
 	led = (state) ? 0x01 | 0x04 : 0;
 	while (i8042_read_status() & I8042_STR_IBF)
 		DELAY;
-	dbg("%02x -> i8042 (panic blink)", 0xed);
+	dbg("%02x -> i8042 (panic blink)\n", 0xed);
 	i8042_suppress_kbd_ack = 2;
 	i8042_write_data(0xed); /* set leds */
 	DELAY;
 	while (i8042_read_status() & I8042_STR_IBF)
 		DELAY;
 	DELAY;
-	dbg("%02x -> i8042 (panic blink)", led);
+	dbg("%02x -> i8042 (panic blink)\n", led);
 	i8042_write_data(led);
 	DELAY;
 	return delay;
@@ -1068,9 +1066,7 @@ static void i8042_dritek_enable(void)
 
 	error = i8042_command(&param, 0x1059);
 	if (error)
-		printk(KERN_WARNING
-			"Failed to enable DRITEK extension: %d\n",
-			error);
+		pr_warn("Failed to enable DRITEK extension: %d\n", error);
 }
 #endif
 
@@ -1105,10 +1101,10 @@ static int i8042_controller_resume(bool force_reset)
 	i8042_ctr |= I8042_CTR_AUXDIS | I8042_CTR_KBDDIS;
 	i8042_ctr &= ~(I8042_CTR_AUXINT | I8042_CTR_KBDINT);
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
-		printk(KERN_WARNING "i8042: Can't write CTR to resume, retrying...\n");
+		pr_warn("Can't write CTR to resume, retrying...\n");
 		msleep(50);
 		if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
-			printk(KERN_ERR "i8042: CTR write retry failed\n");
+			pr_err("CTR write retry failed\n");
 			return -EIO;
 		}
 	}
@@ -1121,9 +1117,7 @@ static int i8042_controller_resume(bool force_reset)
 
 	if (i8042_mux_present) {
 		if (i8042_set_mux_mode(true, NULL) || i8042_enable_mux_ports())
-			printk(KERN_WARNING
-				"i8042: failed to resume active multiplexor, "
-				"mouse won't work.\n");
+			pr_warn("failed to resume active multiplexor, mouse won't work\n");
 	} else if (i8042_ports[I8042_AUX_PORT_NO].serio)
 		i8042_enable_aux_port();
 

drivers/input/serio/i8042.h

@@ -92,12 +92,16 @@ static unsigned long i8042_start_time;
 #define dbg(format, arg...)							\
 	do {									\
 		if (i8042_debug)						\
-			printk(KERN_DEBUG __FILE__ ": " format " [%d]\n" ,	\
-	 			## arg, (int) (jiffies - i8042_start_time));	\
+			printk(KERN_DEBUG KBUILD_MODNAME ": [%d] " format,	\
+			       (int) (jiffies - i8042_start_time), ##arg);	\
 	} while (0)
 #else
 #define dbg_init() do { } while (0)
-#define dbg(format, arg...) do {} while (0)
+#define dbg(format, arg...)							\
+	do {									\
+		if (0)								\
+			printk(KERN_DEBUG pr_fmt(format), ##arg);		\
+	} while (0)
 #endif
 
 #endif /* _I8042_H */