From 4dd8b26a40acf8450835d27bf922be145f7bd206 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Sun, 25 Jan 2015 20:31:32 +0100 Subject: [PATCH] brcmfmac: use SDIO DPC for control frames. Control frames are normally handled outside DPC, but sometimes within DPC. To simplify code always handle control within DPC. Reviewed-by: Arend Van Spriel Reviewed-by: Franky (Zhenhui) Lin Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Daniel (Deognyoun) Kim Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: Kalle Valo --- .../net/wireless/brcm80211/brcmfmac/sdio.c | 87 +++++++------------ 1 file changed, 33 insertions(+), 54 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c index 2c4f0ccd3b70..b4f5fe5d99a6 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c @@ -44,7 +44,8 @@ #include "chip.h" #include "firmware.h" -#define DCMD_RESP_TIMEOUT 2000 /* In milli second */ +#define DCMD_RESP_TIMEOUT 2000 /* In milli second */ +#define CTL_DONE_TIMEOUT 2000 /* In milli second */ #ifdef DEBUG @@ -495,9 +496,9 @@ struct brcmf_sdio { u8 *ctrl_frame_buf; u16 ctrl_frame_len; bool ctrl_frame_stat; + int ctrl_frame_err; spinlock_t txq_lock; /* protect bus->txq */ - struct semaphore tx_seq_lock; /* protect bus->tx_seq */ wait_queue_head_t ctrl_wait; wait_queue_head_t dcmd_resp_wait; @@ -2376,8 +2377,6 @@ static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes) /* Send frames until the limit or some other event */ for (cnt = 0; (cnt < maxframes) && data_ok(bus);) { pkt_num = 1; - if (down_interruptible(&bus->tx_seq_lock)) - return cnt; if (bus->txglom) pkt_num = min_t(u8, bus->tx_max - bus->tx_seq, bus->sdiodev->txglomsz); @@ -2393,13 +2392,10 @@ static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes) __skb_queue_tail(&pktq, pkt); } spin_unlock_bh(&bus->txq_lock); - if (i == 0) { - up(&bus->tx_seq_lock); + if (i == 0) break; - } ret = brcmf_sdio_txpkt(bus, &pktq, SDPCM_DATA_CHANNEL); - up(&bus->tx_seq_lock); cnt += i; @@ -2743,17 +2739,14 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus) brcmf_sdio_clrintr(bus); if (bus->ctrl_frame_stat && (bus->clkstate == CLK_AVAIL) && - (down_interruptible(&bus->tx_seq_lock) == 0)) { - if (data_ok(bus)) { - sdio_claim_host(bus->sdiodev->func[1]); - err = brcmf_sdio_tx_ctrlframe(bus, bus->ctrl_frame_buf, - bus->ctrl_frame_len); - sdio_release_host(bus->sdiodev->func[1]); - - bus->ctrl_frame_stat = false; - brcmf_sdio_wait_event_wakeup(bus); - } - up(&bus->tx_seq_lock); + data_ok(bus)) { + sdio_claim_host(bus->sdiodev->func[1]); + err = brcmf_sdio_tx_ctrlframe(bus, bus->ctrl_frame_buf, + bus->ctrl_frame_len); + sdio_release_host(bus->sdiodev->func[1]); + bus->ctrl_frame_err = err; + bus->ctrl_frame_stat = false; + brcmf_sdio_wait_event_wakeup(bus); } /* Send queued frames (limit 1 if rx may still be pending) */ if ((bus->clkstate == CLK_AVAIL) && !atomic_read(&bus->fcstate) && @@ -2965,43 +2958,30 @@ brcmf_sdio_bus_txctl(struct device *dev, unsigned char *msg, uint msglen) struct brcmf_bus *bus_if = dev_get_drvdata(dev); struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; struct brcmf_sdio *bus = sdiodev->bus; - int ret = -1; + int ret; brcmf_dbg(TRACE, "Enter\n"); - if (down_interruptible(&bus->tx_seq_lock)) - return -EINTR; - - if (!data_ok(bus)) { - brcmf_dbg(INFO, "No bus credit bus->tx_max %d, bus->tx_seq %d\n", - bus->tx_max, bus->tx_seq); - up(&bus->tx_seq_lock); - /* Send from dpc */ - bus->ctrl_frame_buf = msg; - bus->ctrl_frame_len = msglen; - bus->ctrl_frame_stat = true; - - wait_event_interruptible_timeout(bus->ctrl_wait, - !bus->ctrl_frame_stat, - msecs_to_jiffies(2000)); - - if (!bus->ctrl_frame_stat) { - brcmf_dbg(SDIO, "ctrl_frame_stat == false\n"); - ret = 0; - } else { - brcmf_dbg(SDIO, "ctrl_frame_stat == true\n"); - bus->ctrl_frame_stat = false; - if (down_interruptible(&bus->tx_seq_lock)) - return -EINTR; - ret = -1; - } + /* Send from dpc */ + bus->ctrl_frame_buf = msg; + bus->ctrl_frame_len = msglen; + bus->ctrl_frame_stat = true; + if (atomic_read(&bus->dpc_tskcnt) == 0) { + atomic_inc(&bus->dpc_tskcnt); + queue_work(bus->brcmf_wq, &bus->datawork); } - if (ret == -1) { - sdio_claim_host(bus->sdiodev->func[1]); - brcmf_sdio_bus_sleep(bus, false, false); - ret = brcmf_sdio_tx_ctrlframe(bus, msg, msglen); - sdio_release_host(bus->sdiodev->func[1]); - up(&bus->tx_seq_lock); + + wait_event_interruptible_timeout(bus->ctrl_wait, !bus->ctrl_frame_stat, + msecs_to_jiffies(CTL_DONE_TIMEOUT)); + + if (!bus->ctrl_frame_stat) { + brcmf_dbg(SDIO, "ctrl_frame complete, err=%d\n", + bus->ctrl_frame_err); + ret = bus->ctrl_frame_err; + } else { + brcmf_dbg(SDIO, "ctrl_frame timeout\n"); + bus->ctrl_frame_stat = false; + ret = -ETIMEDOUT; } if (ret) @@ -3009,7 +2989,7 @@ brcmf_sdio_bus_txctl(struct device *dev, unsigned char *msg, uint msglen) else bus->sdcnt.tx_ctlpkts++; - return ret ? -EIO : 0; + return ret; } #ifdef DEBUG @@ -4165,7 +4145,6 @@ struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev) spin_lock_init(&bus->rxctl_lock); spin_lock_init(&bus->txq_lock); - sema_init(&bus->tx_seq_lock, 1); init_waitqueue_head(&bus->ctrl_wait); init_waitqueue_head(&bus->dcmd_resp_wait); -- GitLab