提交 4d3fac08 编写于 作者: L Linus Torvalds

Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  pata_sis: add missing UDMA5 timing value in sis_66_set_dmamode()
  sata_sil24: fix IRQ clearing race when PCIX_IRQ_WOC is used
......@@ -375,8 +375,9 @@ static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev)
int drive_pci = sis_old_port_base(adev);
u16 timing;
/* MWDMA 0-2 and UDMA 0-5 */
const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 };
const u16 udma_bits[] = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000};
const u16 udma_bits[] = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000, 0x8000 };
pci_read_config_word(pdev, drive_pci, &timing);
......
......@@ -888,6 +888,16 @@ static inline void sil24_host_intr(struct ata_port *ap)
u32 slot_stat, qc_active;
int rc;
/* If PCIX_IRQ_WOC, there's an inherent race window between
* clearing IRQ pending status and reading PORT_SLOT_STAT
* which may cause spurious interrupts afterwards. This is
* unavoidable and much better than losing interrupts which
* happens if IRQ pending is cleared after reading
* PORT_SLOT_STAT.
*/
if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC)
writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT);
slot_stat = readl(port + PORT_SLOT_STAT);
if (unlikely(slot_stat & HOST_SSTAT_ATTN)) {
......@@ -895,9 +905,6 @@ static inline void sil24_host_intr(struct ata_port *ap)
return;
}
if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC)
writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT);
qc_active = slot_stat & ~HOST_SSTAT_ATTN;
rc = ata_qc_complete_multiple(ap, qc_active, sil24_finish_qc);
if (rc > 0)
......@@ -910,7 +917,8 @@ static inline void sil24_host_intr(struct ata_port *ap)
return;
}
if (ata_ratelimit())
/* spurious interrupts are expected if PCIX_IRQ_WOC */
if (!(ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) && ata_ratelimit())
ata_port_printk(ap, KERN_INFO, "spurious interrupt "
"(slot_stat 0x%x active_tag %d sactive 0x%x)\n",
slot_stat, ap->active_tag, ap->sactive);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册