From 4b92253acc723f365ad6b2f32e4118e38133b7b8 Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Thu, 13 Nov 2008 03:15:55 -0300 Subject: [PATCH] V4L/DVB (9628): em28xx: refactor IR support Refactor the em28xx IR support based on the em2860/em2880 and em2874 datasheets. Tested on the HVR-950 (em2883), Pinnacle 800e (em2883), Pinnacle 80e (em2874) using the remote controls that came with those products. Signed-off-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 4 + drivers/media/video/em28xx/em28xx-input.c | 202 ++++++++++++++-------- drivers/media/video/em28xx/em28xx-reg.h | 8 + drivers/media/video/em28xx/em28xx.h | 4 + 4 files changed, 147 insertions(+), 71 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 1d38bfaa3e7c..3b585486f7fe 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -592,6 +592,7 @@ struct em28xx_board em28xx_boards[] = { .mts_firmware = 1, .has_12mhz_i2s = 1, .has_dvb = 1, + .ir_codes = ir_codes_hauppauge_new, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, @@ -615,6 +616,7 @@ struct em28xx_board em28xx_boards[] = { .mts_firmware = 1, .has_12mhz_i2s = 1, .has_dvb = 1, + .ir_codes = ir_codes_pinnacle_pctv_hd, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, @@ -1092,6 +1094,7 @@ struct em28xx_board em28xx_boards[] = { .vchannels = 0, .tuner_type = TUNER_ABSENT, .has_dvb = 1, + .ir_codes = ir_codes_pinnacle_pctv_hd, .decoder = EM28XX_NODECODER, #ifdef DJH_DEBUG .input = { { @@ -1329,6 +1332,7 @@ static void em28xx_set_model(struct em28xx *dev) dev->max_range_640_480 = em28xx_boards[dev->model].max_range_640_480; dev->has_dvb = em28xx_boards[dev->model].has_dvb; dev->has_snapshot_button = em28xx_boards[dev->model].has_snapshot_button; + dev->ir_codes = em28xx_boards[dev->model].ir_codes; dev->valid = em28xx_boards[dev->model].valid; } diff --git a/drivers/media/video/em28xx/em28xx-input.c b/drivers/media/video/em28xx/em28xx-input.c index 159b5c307f25..07edd4067acc 100644 --- a/drivers/media/video/em28xx/em28xx-input.c +++ b/drivers/media/video/em28xx/em28xx-input.c @@ -52,6 +52,13 @@ MODULE_PARM_DESC(ir_debug, "enable debug messages [IR]"); Polling structure used by em28xx IR's **********************************************************/ +struct em28xx_ir_poll_result { + unsigned int toggle_bit:1; + unsigned int read_count:7; + u8 rc_address; + u8 rc_data[4]; /* 1 byte on em2860/2880, 4 on em2874 */ +}; + struct em28xx_IR { struct em28xx *dev; struct input_dev *input; @@ -63,13 +70,11 @@ struct em28xx_IR { int polling; struct work_struct work; struct timer_list timer; - u32 last_gpio; - u32 mask_keycode; - u32 mask_keydown; - u32 mask_keyup; - u32 mask_repeat; + unsigned int last_toggle:1; + unsigned int last_readcount; + unsigned int repeat_interval; - int (*get_key)(struct em28xx_IR *); + int (*get_key)(struct em28xx_IR *, struct em28xx_ir_poll_result *); }; /********************************************************** @@ -162,11 +167,13 @@ int em28xx_get_key_pinnacle_usb_grey(struct IR_i2c *ir, u32 *ir_key, Poll based get keycode functions **********************************************************/ -static int default_polling_getkey(struct em28xx_IR *ir) +/* This is for the em2860/em2880 */ +static int default_polling_getkey(struct em28xx_IR *ir, + struct em28xx_ir_poll_result *poll_result) { struct em28xx *dev = ir->dev; int rc; - u8 msg[4] = { 0, 0, 0, 0 }; + u8 msg[3] = { 0, 0, 0 }; /* Read key toggle, brand, and key code on registers 0x45, 0x46 and 0x47 @@ -176,7 +183,51 @@ static int default_polling_getkey(struct em28xx_IR *ir) if (rc < 0) return rc; - return (int)(le32_to_cpu(*(u32 *)msg)); + /* Infrared toggle (Reg 0x45[7]) */ + poll_result->toggle_bit = (msg[0] >> 7); + + /* Infrared read count (Reg 0x45[6:0] */ + poll_result->read_count = (msg[0] & 0x7f); + + /* Remote Control Address (Reg 0x46) */ + poll_result->rc_address = msg[1]; + + /* Remote Control Data (Reg 0x47) */ + poll_result->rc_data[0] = msg[2]; + + return 0; +} + +static int em2874_polling_getkey(struct em28xx_IR *ir, + struct em28xx_ir_poll_result *poll_result) +{ + struct em28xx *dev = ir->dev; + int rc; + u8 msg[5] = { 0, 0, 0, 0, 0 }; + + /* Read key toggle, brand, and key code + on registers 0x51-55 + */ + rc = dev->em28xx_read_reg_req_len(dev, 0, EM2874_R51_IR, + msg, sizeof(msg)); + if (rc < 0) + return rc; + + /* Infrared toggle (Reg 0x51[7]) */ + poll_result->toggle_bit = (msg[0] >> 7); + + /* Infrared read count (Reg 0x51[6:0] */ + poll_result->read_count = (msg[0] & 0x7f); + + /* Remote Control Address (Reg 0x52) */ + poll_result->rc_address = msg[1]; + + /* Remote Control Data (Reg 0x53-55) */ + poll_result->rc_data[0] = msg[2]; + poll_result->rc_data[1] = msg[3]; + poll_result->rc_data[2] = msg[4]; + + return 0; } /********************************************************** @@ -185,52 +236,60 @@ static int default_polling_getkey(struct em28xx_IR *ir) static void em28xx_ir_handle_key(struct em28xx_IR *ir) { - int gpio; - u32 data; - - /* read gpio value */ - gpio = ir->get_key(ir); - if (gpio < 0) + int result; + int do_sendkey = 0; + struct em28xx_ir_poll_result poll_result; + + /* read the registers containing the IR status */ + result = ir->get_key(ir, &poll_result); + if (result < 0) { + dprintk("ir->get_key() failed %d\n", result); return; + } - if (gpio == ir->last_gpio) - return; + dprintk("ir->get_key result tb=%02x rc=%02x lr=%02x data=%02x\n", + poll_result.toggle_bit, poll_result.read_count, + ir->last_readcount, poll_result.rc_data[0]); + + if (ir->dev->chip_id == CHIP_ID_EM2874) { + /* The em2874 clears the readcount field every time the + register is read. The em2860/2880 datasheet says that it + is supposed to clear the readcount, but it doesn't. So with + the em2874, we are looking for a non-zero read count as + opposed to a readcount that is incrementing */ + ir->last_readcount = 0; + } - ir->last_gpio = gpio; - - /* extract data */ - data = ir_extract_bits(gpio, ir->mask_keycode); - dprintk("irq gpio=0x%x code=%d | poll%s%s\n", - gpio, data, - (gpio & ir->mask_keydown) ? " down" : "", - (gpio & ir->mask_keyup) ? " up" : ""); - - /* Generate keyup/keydown events */ - if (ir->mask_keydown) { - /* bit set on keydown */ - if (gpio & ir->mask_keydown) - ir_input_keydown(ir->input, &ir->ir, data, data); - else - ir_input_nokey(ir->input, &ir->ir); - } else if (ir->mask_keyup) { - /* bit cleared on keydown */ - if (!(gpio & ir->mask_keyup)) - ir_input_keydown(ir->input, &ir->ir, data, data); - else - ir_input_nokey(ir->input, &ir->ir); - } else if (ir->mask_repeat) { - int count = ir->mask_repeat & gpio; - - /* Avoid keyboard bouncing */ - if ((count == 1) || (count >= 5)) { - ir_input_keydown(ir->input, &ir->ir, data, data); - ir_input_nokey(ir->input, &ir->ir); + if (poll_result.read_count == 0) { + /* The button has not been pressed since the last read */ + } else if (ir->last_toggle != poll_result.toggle_bit) { + /* A button has been pressed */ + dprintk("button has been pressed\n"); + ir->last_toggle = poll_result.toggle_bit; + ir->repeat_interval = 0; + do_sendkey = 1; + } else if (poll_result.toggle_bit == ir->last_toggle && + poll_result.read_count > 0 && + poll_result.read_count != ir->last_readcount) { + /* The button is still being held down */ + dprintk("button being held down\n"); + + /* Debouncer for first keypress */ + if (ir->repeat_interval++ > 9) { + /* Start repeating after 1 second */ + do_sendkey = 1; } - } else { - /* can't distinguish keydown/up :-/ */ - ir_input_keydown(ir->input, &ir->ir, data, data); + } + + if (do_sendkey) { + dprintk("sending keypress\n"); + ir_input_keydown(ir->input, &ir->ir, poll_result.rc_data[0], + poll_result.rc_data[0]); ir_input_nokey(ir->input, &ir->ir); } + + ir->last_readcount = poll_result.read_count; + return; } static void ir_timer(unsigned long data) @@ -265,10 +324,14 @@ int em28xx_ir_init(struct em28xx *dev) { struct em28xx_IR *ir; struct input_dev *input_dev; - IR_KEYTAB_TYPE *ir_codes = NULL; - int ir_type = IR_TYPE_OTHER; + u8 ir_config; int err = -ENOMEM; + if (dev->ir_codes == NULL) { + /* No remote control support */ + return 0; + } + ir = kzalloc(sizeof(*ir), GFP_KERNEL); input_dev = input_allocate_device(); if (!ir || !input_dev) @@ -276,25 +339,26 @@ int em28xx_ir_init(struct em28xx *dev) ir->input = input_dev; - /* */ - ir->get_key = default_polling_getkey; - ir->polling = 50; /* ms */ - - /* detect & configure */ - switch (dev->model) { - case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: - ir_type = IR_TYPE_OTHER; - ir_codes = ir_codes_hauppauge_new; - ir->mask_keycode = 0x007f0000; - ir->mask_repeat = 0x0000007f; + /* Setup the proper handler based on the chip */ + switch (dev->chip_id) { + case CHIP_ID_EM2860: + case CHIP_ID_EM2883: + ir->get_key = default_polling_getkey; break; - } - - if (NULL == ir_codes) { - err = -ENODEV; + case CHIP_ID_EM2874: + ir->get_key = em2874_polling_getkey; + /* For now we only support RC5, so enable it */ + ir_config = EM2874_IR_RC5; + em28xx_write_regs(dev, EM2874_R50_IR_CONFIG, &ir_config, 1); + break; + default: + printk("Unrecognized em28xx chip id: IR not supported\n"); goto err_out_free; } + /* This is how often we ask the chip for IR information */ + ir->polling = 100; /* ms */ + /* init input device */ snprintf(ir->name, sizeof(ir->name), "em28xx IR (%s)", dev->name); @@ -302,7 +366,7 @@ int em28xx_ir_init(struct em28xx *dev) usb_make_path(dev->udev, ir->phys, sizeof(ir->phys)); strlcat(ir->phys, "/input0", sizeof(ir->phys)); - ir_input_init(input_dev, &ir->ir, ir_type, ir_codes); + ir_input_init(input_dev, &ir->ir, IR_TYPE_OTHER, dev->ir_codes); input_dev->name = ir->name; input_dev->phys = ir->phys; input_dev->id.bustype = BUS_USB; @@ -315,10 +379,6 @@ int em28xx_ir_init(struct em28xx *dev) ir->dev = dev; dev->ir = ir; - /* Get the current key status, to avoid adding an - unexistent key code */ - ir->last_gpio = ir->get_key(ir); - em28xx_ir_start(ir); /* all done */ diff --git a/drivers/media/video/em28xx/em28xx-reg.h b/drivers/media/video/em28xx/em28xx-reg.h index f67955a1b818..b8e97836370f 100644 --- a/drivers/media/video/em28xx/em28xx-reg.h +++ b/drivers/media/video/em28xx/em28xx-reg.h @@ -84,9 +84,17 @@ #define EM28XX_R14_VIDEO_AC97 0x14 /* em2874 registers */ +#define EM2874_R50_IR_CONFIG 0x50 +#define EM2874_R51_IR 0x51 #define EM2874_R5F_TS_ENABLE 0x5f #define EM2874_R80_GPIO 0x80 +/* em2874 IR config register (0x50) */ +#define EM2874_IR_NEC 0x00 +#define EM2874_IR_RC5 0x04 +#define EM2874_IR_RC5_MODE_0 0x08 +#define EM2874_IR_RC5_MODE_6A 0x0b + /* em2874 Transport Stream Enable Register (0x5f) */ #define EM2874_TS1_CAPTURE_ENABLE (1 << 0) #define EM2874_TS1_FILTER_ENABLE (1 << 1) diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 73fd9e9e0403..9ff3c83e63d0 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -305,6 +305,7 @@ struct em28xx_board { struct em28xx_input input[MAX_EM28XX_INPUT]; struct em28xx_input radio; + IR_KEYTAB_TYPE *ir_codes; }; struct em28xx_eeprom { @@ -481,6 +482,9 @@ struct em28xx { /* Caches GPO and GPIO registers */ unsigned char reg_gpo, reg_gpio; + /* Infrared remote control support */ + IR_KEYTAB_TYPE *ir_codes; + /* Snapshot button */ char snapshot_button_path[30]; /* path of the input dev */ struct input_dev *sbutton_input_dev; -- GitLab