sh_eth: remove sh_eth_cpu_data::rpadir_value

If RPADIR exists, the value written to it is always the same for all SoCs
(and derived from NET_IP_ALIGN), so there has not  been any need to store
it in the *struct* sh_eth_cpu_data...
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/renesas/sh_eth.c

@@ -622,7 +622,6 @@ static struct sh_eth_cpu_data r7s72100_data = {
 	.tpauser	= 1,
 	.hw_swap	= 1,
 	.rpadir		= 1,
-	.rpadir_value   = 2 << 16,
 	.no_trimd	= 1,
 	.no_ade		= 1,
 	.xdfar_rw	= 1,
@@ -672,7 +671,6 @@ static struct sh_eth_cpu_data r8a7740_data = {
 	.bculr		= 1,
 	.hw_swap	= 1,
 	.rpadir		= 1,
-	.rpadir_value   = 2 << 16,
 	.no_trimd	= 1,
 	.no_ade		= 1,
 	.xdfar_rw	= 1,
@@ -798,7 +796,6 @@ static struct sh_eth_cpu_data r8a77980_data = {
 	.hw_swap	= 1,
 	.nbst		= 1,
 	.rpadir		= 1,
-	.rpadir_value   = 2 << 16,
 	.no_trimd	= 1,
 	.no_ade		= 1,
 	.xdfar_rw	= 1,
@@ -851,7 +848,6 @@ static struct sh_eth_cpu_data sh7724_data = {
 	.tpauser	= 1,
 	.hw_swap	= 1,
 	.rpadir		= 1,
-	.rpadir_value	= 0x00020000, /* NET_IP_ALIGN assumed to be 2 */
 };
 
 static void sh_eth_set_rate_sh7757(struct net_device *ndev)
@@ -898,7 +894,6 @@ static struct sh_eth_cpu_data sh7757_data = {
 	.hw_swap	= 1,
 	.no_ade		= 1,
 	.rpadir		= 1,
-	.rpadir_value   = 2 << 16,
 	.rtrate		= 1,
 	.dual_port	= 1,
 };
@@ -978,7 +973,6 @@ static struct sh_eth_cpu_data sh7757_data_giga = {
 	.bculr		= 1,
 	.hw_swap	= 1,
 	.rpadir		= 1,
-	.rpadir_value   = 2 << 16,
 	.no_trimd	= 1,
 	.no_ade		= 1,
 	.xdfar_rw	= 1,
@@ -1467,7 +1461,7 @@ static int sh_eth_dev_init(struct net_device *ndev)
 	/* Descriptor format */
 	sh_eth_ring_format(ndev);
 	if (mdp->cd->rpadir)
-		sh_eth_write(ndev, mdp->cd->rpadir_value, RPADIR);
+		sh_eth_write(ndev, NET_IP_ALIGN << 16, RPADIR);
 
 	/* all sh_eth int mask */
 	sh_eth_write(ndev, 0, EESIPR);

drivers/net/ethernet/renesas/sh_eth.h

@@ -487,7 +487,6 @@ struct sh_eth_cpu_data {
 	u32 ecsipr_value;
 	u32 fdr_value;
 	u32 fcftr_value;
-	u32 rpadir_value;
 
 	/* interrupt checking mask */
 	u32 tx_check;