diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index a16be605c6301b9294dcc50993d6ea5712b3e52e..43bfe50a22273709ed2cbc1b58d65203bc2383af 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -158,8 +158,11 @@ #define USB_PID_WINFAST_DTV_DONGLE_COLD 0x6025 #define USB_PID_WINFAST_DTV_DONGLE_WARM 0x6026 #define USB_PID_WINFAST_DTV_DONGLE_STK7700P 0x6f00 -#define USB_PID_GENPIX_8PSK_COLD 0x0200 -#define USB_PID_GENPIX_8PSK_WARM 0x0201 +#define USB_PID_GENPIX_8PSK_REV_1_COLD 0x0200 +#define USB_PID_GENPIX_8PSK_REV_1_WARM 0x0201 +#define USB_PID_GENPIX_8PSK_REV_2 0x0202 +#define USB_PID_GENPIX_SKYWALKER_1 0x0203 +#define USB_PID_GENPIX_SKYWALKER_CW3K 0x0204 #define USB_PID_SIGMATEK_DVB_110 0x6610 #define USB_PID_MSI_DIGI_VOX_MINI_II 0x1513 #define USB_PID_OPERA1_COLD 0x2830 diff --git a/drivers/media/dvb/dvb-usb/gp8psk-fe.c b/drivers/media/dvb/dvb-usb/gp8psk-fe.c index 6ccbdc9cd7725a58c444f9275d67a86f7c9a5c09..e37142d9271a83aa0f1b3e3575e21dc3c5a8a6f3 100644 --- a/drivers/media/dvb/dvb-usb/gp8psk-fe.c +++ b/drivers/media/dvb/dvb-usb/gp8psk-fe.c @@ -1,7 +1,8 @@ /* DVB USB compliant Linux driver for the - * - GENPIX 8pks/qpsk USB2.0 DVB-S module + * - GENPIX 8pks/qpsk/DCII USB2.0 DVB-S module * - * Copyright (C) 2006 Alan Nisota (alannisota@gmail.com) + * Copyright (C) 2006,2007 Alan Nisota (alannisota@gmail.com) + * Copyright (C) 2006,2007 Genpix Electronics (genpix@genpix-electronics.com) * * Thanks to GENPIX for the sample code used to implement this module. * @@ -17,27 +18,39 @@ struct gp8psk_fe_state { struct dvb_frontend fe; - struct dvb_usb_device *d; - + u8 lock; u16 snr; - - unsigned long next_snr_check; + unsigned long next_status_check; + unsigned long status_check_interval; }; +static int gp8psk_fe_update_status(struct gp8psk_fe_state *st) +{ + u8 buf[6]; + if (time_after(jiffies,st->next_status_check)) { + gp8psk_usb_in_op(st->d, GET_SIGNAL_LOCK, 0,0,&st->lock,1); + gp8psk_usb_in_op(st->d, GET_SIGNAL_STRENGTH, 0,0,buf,6); + st->snr = (buf[1]) << 8 | buf[0]; + st->next_status_check = jiffies + (st->status_check_interval*HZ)/1000; + } + return 0; +} + static int gp8psk_fe_read_status(struct dvb_frontend* fe, fe_status_t *status) { struct gp8psk_fe_state *st = fe->demodulator_priv; - u8 lock; + gp8psk_fe_update_status(st); - if (gp8psk_usb_in_op(st->d, GET_SIGNAL_LOCK, 0, 0, &lock,1)) - return -EINVAL; - - if (lock) + if (st->lock) *status = FE_HAS_LOCK | FE_HAS_SYNC | FE_HAS_VITERBI | FE_HAS_SIGNAL | FE_HAS_CARRIER; else *status = 0; + if (*status & FE_HAS_LOCK) + st->status_check_interval = 1000; + else + st->status_check_interval = 100; return 0; } @@ -60,33 +73,29 @@ static int gp8psk_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc) static int gp8psk_fe_read_snr(struct dvb_frontend* fe, u16 *snr) { struct gp8psk_fe_state *st = fe->demodulator_priv; - u8 buf[2]; - - if (time_after(jiffies,st->next_snr_check)) { - gp8psk_usb_in_op(st->d,GET_SIGNAL_STRENGTH,0,0,buf,2); - *snr = (int)(buf[1]) << 8 | buf[0]; - /* snr is reported in dBu*256 */ - /* snr / 38.4 ~= 100% strength */ - /* snr * 17 returns 100% strength as 65535 */ - if (*snr <= 3855) - *snr = (*snr<<4) + *snr; // snr * 17 - else - *snr = 65535; - st->next_snr_check = jiffies + (10*HZ)/1000; - } else { - *snr = st->snr; - } + gp8psk_fe_update_status(st); + /* snr is reported in dBu*256 */ + *snr = st->snr; return 0; } static int gp8psk_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength) { - return gp8psk_fe_read_snr(fe, strength); + struct gp8psk_fe_state *st = fe->demodulator_priv; + gp8psk_fe_update_status(st); + /* snr is reported in dBu*256 */ + /* snr / 38.4 ~= 100% strength */ + /* snr * 17 returns 100% strength as 65535 */ + if (st->snr > 0xf00) + *strength = 0xffff; + else + *strength = (st->snr << 4) + st->snr; /* snr*17 */ + return 0; } static int gp8psk_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune) { - tune->min_delay_ms = 800; + tune->min_delay_ms = 200; return 0; } @@ -124,7 +133,9 @@ static int gp8psk_fe_set_frontend(struct dvb_frontend* fe, gp8psk_usb_out_op(state->d,TUNE_8PSK,0,0,cmd,10); - state->next_snr_check = jiffies; + state->lock = 0; + state->next_status_check = jiffies; + state->status_check_interval = 200; return 0; } @@ -190,6 +201,12 @@ static int gp8psk_fe_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t volt return 0; } +static int gp8psk_fe_enable_high_lnb_voltage(struct dvb_frontend* fe, long onoff) +{ + struct gp8psk_fe_state* state = fe->demodulator_priv; + return gp8psk_usb_out_op(state->d, USE_EXTRA_VOLT, onoff, 0,NULL,0); +} + static int gp8psk_fe_send_legacy_dish_cmd (struct dvb_frontend* fe, unsigned long sw_cmd) { struct gp8psk_fe_state* state = fe->demodulator_priv; @@ -235,10 +252,10 @@ struct dvb_frontend * gp8psk_fe_attach(struct dvb_usb_device *d) static struct dvb_frontend_ops gp8psk_fe_ops = { .info = { - .name = "Genpix 8psk-USB DVB-S", + .name = "Genpix 8psk-to-USB2 DVB-S", .type = FE_QPSK, - .frequency_min = 950000, - .frequency_max = 2150000, + .frequency_min = 800000, + .frequency_max = 2250000, .frequency_stepsize = 100, .symbol_rate_min = 1000000, .symbol_rate_max = 45000000, @@ -269,4 +286,5 @@ static struct dvb_frontend_ops gp8psk_fe_ops = { .set_tone = gp8psk_fe_set_tone, .set_voltage = gp8psk_fe_set_voltage, .dishnetwork_send_legacy_command = gp8psk_fe_send_legacy_dish_cmd, + .enable_high_lnb_voltage = gp8psk_fe_enable_high_lnb_voltage }; diff --git a/drivers/media/dvb/dvb-usb/gp8psk.c b/drivers/media/dvb/dvb-usb/gp8psk.c index 518d67fca5e89d4636a11810b6edf2a21539765a..92147ee3e14ffe69a134f5bfea59df244a951c51 100644 --- a/drivers/media/dvb/dvb-usb/gp8psk.c +++ b/drivers/media/dvb/dvb-usb/gp8psk.c @@ -1,7 +1,8 @@ /* DVB USB compliant Linux driver for the - * - GENPIX 8pks/qpsk USB2.0 DVB-S module + * - GENPIX 8pks/qpsk/DCII USB2.0 DVB-S module * - * Copyright (C) 2006 Alan Nisota (alannisota@gmail.com) + * Copyright (C) 2006,2007 Alan Nisota (alannisota@gmail.com) + * Copyright (C) 2006,2007 Genpix Electronics (genpix@genpix-electronics.com) * * Thanks to GENPIX for the sample code used to implement this module. * @@ -40,7 +41,7 @@ int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 } if (ret < 0 || ret != blen) { - warn("usb in operation failed."); + warn("usb in %d operation failed.", req); ret = -EIO; } else ret = 0; @@ -97,10 +98,10 @@ static int gp8psk_load_bcm4500fw(struct dvb_usb_device *d) if (gp8psk_usb_out_op(d, LOAD_BCM4500,1,0,NULL, 0)) goto out_rel_fw; - info("downloaidng bcm4500 firmware from file '%s'",bcm4500_firmware); + info("downloading bcm4500 firmware from file '%s'",bcm4500_firmware); ptr = fw->data; - buf = kmalloc(512, GFP_KERNEL | GFP_DMA); + buf = kmalloc(64, GFP_KERNEL | GFP_DMA); while (ptr[0] != 0xff) { u16 buflen = ptr[0] + 4; @@ -129,25 +130,34 @@ static int gp8psk_load_bcm4500fw(struct dvb_usb_device *d) static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff) { u8 status, buf; + int gp_product_id = le16_to_cpu(d->udev->descriptor.idProduct); + if (onoff) { gp8psk_usb_in_op(d, GET_8PSK_CONFIG,0,0,&status,1); - if (! (status & 0x01)) /* started */ + if (! (status & bm8pskStarted)) { /* started */ + if(gp_product_id == USB_PID_GENPIX_SKYWALKER_CW3K) + gp8psk_usb_out_op(d, CW3K_INIT, 1, 0, NULL, 0); if (gp8psk_usb_in_op(d, BOOT_8PSK, 1, 0, &buf, 1)) return -EINVAL; + } - if (! (status & 0x02)) /* BCM4500 firmware loaded */ - if(gp8psk_load_bcm4500fw(d)) - return EINVAL; + if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) + if (! (status & bm8pskFW_Loaded)) /* BCM4500 firmware loaded */ + if(gp8psk_load_bcm4500fw(d)) + return EINVAL; - if (! (status & 0x04)) /* LNB Power */ + if (! (status & bmIntersilOn)) /* LNB Power */ if (gp8psk_usb_in_op(d, START_INTERSIL, 1, 0, &buf, 1)) return EINVAL; - /* Set DVB mode */ - if(gp8psk_usb_out_op(d, SET_DVB_MODE, 1, 0, NULL, 0)) - return -EINVAL; - gp8psk_usb_in_op(d, GET_8PSK_CONFIG,0,0,&status,1); + /* Set DVB mode to 1 */ + if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) + if (gp8psk_usb_out_op(d, SET_DVB_MODE, 1, 0, NULL, 0)) + return EINVAL; + /* Abort possible TS (if previous tune crashed) */ + if (gp8psk_usb_out_op(d, ARM_TRANSFER, 0, 0, NULL, 0)) + return EINVAL; } else { /* Turn off LNB power */ if (gp8psk_usb_in_op(d, START_INTERSIL, 0, 0, &buf, 1)) @@ -155,11 +165,28 @@ static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff) /* Turn off 8psk power */ if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1)) return -EINVAL; - + if(gp_product_id == USB_PID_GENPIX_SKYWALKER_CW3K) + gp8psk_usb_out_op(d, CW3K_INIT, 0, 0, NULL, 0); } return 0; } +int gp8psk_bcm4500_reload(struct dvb_usb_device *d) +{ + u8 buf; + int gp_product_id = le16_to_cpu(d->udev->descriptor.idProduct); + /* Turn off 8psk power */ + if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1)) + return -EINVAL; + /* Turn On 8psk power */ + if (gp8psk_usb_in_op(d, BOOT_8PSK, 1, 0, &buf, 1)) + return -EINVAL; + /* load BCM4500 firmware */ + if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) + if (gp8psk_load_bcm4500fw(d)) + return EINVAL; + return 0; +} static int gp8psk_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) { @@ -177,12 +204,22 @@ static struct dvb_usb_device_properties gp8psk_properties; static int gp8psk_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - return dvb_usb_device_init(intf,&gp8psk_properties,THIS_MODULE,NULL); + int ret; + struct usb_device *udev = interface_to_usbdev(intf); + ret = dvb_usb_device_init(intf,&gp8psk_properties,THIS_MODULE,NULL); + if (ret == 0) { + info("found Genpix USB device pID = %x (hex)", + le16_to_cpu(udev->descriptor.idProduct)); + } + return ret; } static struct usb_device_id gp8psk_usb_table [] = { - { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_COLD) }, - { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_WARM) }, + { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_1_COLD) }, + { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_1_WARM) }, + { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_2) }, + { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_SKYWALKER_1) }, + { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_SKYWALKER_CW3K) }, { 0 }, }; MODULE_DEVICE_TABLE(usb, gp8psk_usb_table); @@ -213,12 +250,24 @@ static struct dvb_usb_device_properties gp8psk_properties = { .generic_bulk_ctrl_endpoint = 0x01, - .num_device_descs = 1, + .num_device_descs = 4, .devices = { - { .name = "Genpix 8PSK-USB DVB-S USB2.0 receiver", + { .name = "Genpix 8PSK-to-USB2 Rev.1 DVB-S receiver", .cold_ids = { &gp8psk_usb_table[0], NULL }, .warm_ids = { &gp8psk_usb_table[1], NULL }, }, + { .name = "Genpix 8PSK-to-USB2 Rev.2 DVB-S receiver", + .cold_ids = { NULL }, + .warm_ids = { &gp8psk_usb_table[2], NULL }, + }, + { .name = "Genpix SkyWalker-1 DVB-S receiver", + .cold_ids = { NULL }, + .warm_ids = { &gp8psk_usb_table[3], NULL }, + }, + { .name = "Genpix SkyWalker-CW3K DVB-S receiver", + .cold_ids = { NULL }, + .warm_ids = { &gp8psk_usb_table[4], NULL }, + }, { NULL }, } }; @@ -253,6 +302,6 @@ module_init(gp8psk_usb_module_init); module_exit(gp8psk_usb_module_exit); MODULE_AUTHOR("Alan Nisota "); -MODULE_DESCRIPTION("Driver for Genpix 8psk-USB DVB-S USB2.0"); -MODULE_VERSION("1.0"); +MODULE_DESCRIPTION("Driver for Genpix 8psk-to-USB2 DVB-S"); +MODULE_VERSION("1.1"); MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/gp8psk.h b/drivers/media/dvb/dvb-usb/gp8psk.h index 3eba7061011c72e9e4c7b5ce9892097f70a0c8cb..e83a57506cfa945b2f97d16fb8fc9808221f981d 100644 --- a/drivers/media/dvb/dvb-usb/gp8psk.h +++ b/drivers/media/dvb/dvb-usb/gp8psk.h @@ -1,7 +1,8 @@ /* DVB USB compliant Linux driver for the - * - GENPIX 8pks/qpsk USB2.0 DVB-S module + * - GENPIX 8pks/qpsk/DCII USB2.0 DVB-S module * * Copyright (C) 2006 Alan Nisota (alannisota@gmail.com) + * Copyright (C) 2006,2007 Alan Nisota (alannisota@gmail.com) * * Thanks to GENPIX for the sample code used to implement this module. * @@ -30,21 +31,37 @@ extern int dvb_usb_gp8psk_debug; #define TH_COMMAND_IN 0xC0 #define TH_COMMAND_OUT 0xC1 -/* command bytes */ -#define GET_8PSK_CONFIG 0x80 +/* gp8psk commands */ + +#define GET_8PSK_CONFIG 0x80 /* in */ #define SET_8PSK_CONFIG 0x81 +#define I2C_WRITE 0x83 +#define I2C_READ 0x84 #define ARM_TRANSFER 0x85 #define TUNE_8PSK 0x86 -#define GET_SIGNAL_STRENGTH 0x87 +#define GET_SIGNAL_STRENGTH 0x87 /* in */ #define LOAD_BCM4500 0x88 -#define BOOT_8PSK 0x89 -#define START_INTERSIL 0x8A +#define BOOT_8PSK 0x89 /* in */ +#define START_INTERSIL 0x8A /* in */ #define SET_LNB_VOLTAGE 0x8B #define SET_22KHZ_TONE 0x8C #define SEND_DISEQC_COMMAND 0x8D #define SET_DVB_MODE 0x8E #define SET_DN_SWITCH 0x8F -#define GET_SIGNAL_LOCK 0x90 +#define GET_SIGNAL_LOCK 0x90 /* in */ +#define GET_SERIAL_NUMBER 0x93 /* in */ +#define USE_EXTRA_VOLT 0x94 +#define CW3K_INIT 0x9d + +/* PSK_configuration bits */ +#define bm8pskStarted 0x01 +#define bm8pskFW_Loaded 0x02 +#define bmIntersilOn 0x04 +#define bmDVBmode 0x08 +#define bm22kHz 0x10 +#define bmSEL18V 0x20 +#define bmDCtuned 0x40 +#define bmArmed 0x80 /* Satellite modulation modes */ #define ADV_MOD_DVB_QPSK 0 /* DVB-S QPSK */ @@ -75,5 +92,6 @@ extern struct dvb_frontend * gp8psk_fe_attach(struct dvb_usb_device *d); extern int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen); extern int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen); +extern int gp8psk_bcm4500_reload(struct dvb_usb_device *d); #endif