From 44e18e9eda1f5c318a888989d929188eea93c8dc Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Fri, 3 Jul 2009 08:39:34 +0000 Subject: [PATCH] sh-sci: update receive error handling for muxed irqs This patch updates the receive error code for muxed interrupts in the sh-sci driver. Receive error interrupts may be generated by the hardware if RE or REIE bits in SCSCR are set. Update the muxed interrupt handling code to acknowledge error interrupts if RE or REIE is set, instead of only acknowledging if REIE is set. Without this patch error interrupts may be generated but never acked resulting in a "nobody cared" crash. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 66f52674ca0c..12bd64684f12 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -707,12 +707,13 @@ static irqreturn_t sci_br_interrupt(int irq, void *ptr) static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) { - unsigned short ssr_status, scr_status; + unsigned short ssr_status, scr_status, err_enabled; struct uart_port *port = ptr; irqreturn_t ret = IRQ_NONE; ssr_status = sci_in(port, SCxSR); scr_status = sci_in(port, SCSCR); + err_enabled = scr_status & (SCI_CTRL_FLAGS_REIE | SCI_CTRL_FLAGS_RIE); /* Tx Interrupt */ if ((ssr_status & 0x0020) && (scr_status & SCI_CTRL_FLAGS_TIE)) @@ -721,10 +722,10 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) if ((ssr_status & 0x0002) && (scr_status & SCI_CTRL_FLAGS_RIE)) ret = sci_rx_interrupt(irq, ptr); /* Error Interrupt */ - if ((ssr_status & 0x0080) && (scr_status & SCI_CTRL_FLAGS_REIE)) + if ((ssr_status & 0x0080) && err_enabled) ret = sci_er_interrupt(irq, ptr); /* Break Interrupt */ - if ((ssr_status & 0x0010) && (scr_status & SCI_CTRL_FLAGS_REIE)) + if ((ssr_status & 0x0010) && err_enabled) ret = sci_br_interrupt(irq, ptr); return ret; -- GitLab