From 3b81221a529c087171557d7c4aec02b0ba029bb1 Mon Sep 17 00:00:00 2001 From: Huang Rui Date: Tue, 28 Oct 2014 19:54:25 +0800 Subject: [PATCH] usb: dwc3: add disscramble quirk This patch adds disscramble quirk, and it only needs to be enabled at fpga board on some vendor platforms. Signed-off-by: Huang Rui Signed-off-by: Felipe Balbi --- Documentation/devicetree/bindings/usb/dwc3.txt | 2 ++ drivers/usb/dwc3/core.c | 14 +++++++++++++- drivers/usb/dwc3/core.h | 3 +++ drivers/usb/dwc3/platform_data.h | 2 ++ 4 files changed, 20 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index 471366d6a129..8ec2256a4a09 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -14,6 +14,8 @@ Optional properties: - phys: from the *Generic PHY* bindings - phy-names: from the *Generic PHY* bindings - tx-fifo-resize: determines if the FIFO *has* to be reallocated. + - snps,disable_scramble_quirk: true when SW should disable data scrambling. + Only really useful for FPGA builds. This is usually a subnode to DWC3 glue to which it is connected. diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 9830f87b6940..a0ae1326b7e3 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -422,7 +422,6 @@ static int dwc3_core_init(struct dwc3 *dwc) reg = dwc3_readl(dwc->regs, DWC3_GCTL); reg &= ~DWC3_GCTL_SCALEDOWN_MASK; - reg &= ~DWC3_GCTL_DISSCRAMBLE; switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1)) { case DWC3_GHWPARAMS1_EN_PWROPT_CLK: @@ -466,6 +465,14 @@ static int dwc3_core_init(struct dwc3 *dwc) dwc->is_fpga = true; } + WARN_ONCE(dwc->disable_scramble_quirk && !dwc->is_fpga, + "disable_scramble cannot be used on non-FPGA builds\n"); + + if (dwc->disable_scramble_quirk && dwc->is_fpga) + reg |= DWC3_GCTL_DISSCRAMBLE; + else + reg &= ~DWC3_GCTL_DISSCRAMBLE; + /* * WORKAROUND: DWC3 revisions <1.90a have a bug * where the device can fail to connect at SuperSpeed @@ -710,11 +717,16 @@ static int dwc3_probe(struct platform_device *pdev) dwc->needs_fifo_resize = of_property_read_bool(node, "tx-fifo-resize"); dwc->dr_mode = of_usb_get_dr_mode(node); + + dwc->disable_scramble_quirk = of_property_read_bool(node, + "snps,disable_scramble_quirk"); } else if (pdata) { dwc->maximum_speed = pdata->maximum_speed; dwc->needs_fifo_resize = pdata->tx_fifo_resize; dwc->dr_mode = pdata->dr_mode; + + dwc->disable_scramble_quirk = pdata->disable_scramble_quirk; } /* default to superspeed if no maximum_speed passed */ diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index f6ee623e2d1b..56bada6c8604 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -672,6 +672,7 @@ struct dwc3_scratchpad_array { * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround * @start_config_issued: true when StartConfig command has been issued * @three_stage_setup: set if we perform a three phase setup + * @disable_scramble_quirk: set if we enable the disable scramble quirk */ struct dwc3 { struct usb_ctrlrequest *ctrl_req; @@ -776,6 +777,8 @@ struct dwc3 { unsigned setup_packet_pending:1; unsigned start_config_issued:1; unsigned three_stage_setup:1; + + unsigned disable_scramble_quirk:1; }; /* -------------------------------------------------------------------------- */ diff --git a/drivers/usb/dwc3/platform_data.h b/drivers/usb/dwc3/platform_data.h index 7db34f00b89a..9209d025597b 100644 --- a/drivers/usb/dwc3/platform_data.h +++ b/drivers/usb/dwc3/platform_data.h @@ -24,4 +24,6 @@ struct dwc3_platform_data { enum usb_device_speed maximum_speed; enum usb_dr_mode dr_mode; bool tx_fifo_resize; + + unsigned disable_scramble_quirk:1; }; -- GitLab