usb: ehci: use amd_chipset_type to filter for usb subsystem hang bug

Commit "usb: pci-quirks: refactor AMD quirk to abstract AMD chipset types"
introduced a new AMD chipset type to filter AMD platforms with different
chipsets.

According to a recent thread [1], this patch updates USB subsystem hang
symptom quirk which is observed on AMD all SB600 and SB700 revision
0x3a/0x3b. And make it use the new chipset type to represent.

[1] http://marc.info/?l=linux-usb&m=138012321616452&w=2Signed-off-by: NHuang Rui <ray.huang@amd.com>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/host/ehci-pci.c

@@ -58,8 +58,6 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 {
 	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
 	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
-	struct pci_dev		*p_smbus;
-	u8			rev;
 	u32			temp;
 	int			retval;
 
@@ -175,23 +173,13 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 		/* SB600 and old version of SB700 have a bug in EHCI controller,
 		 * which causes usb devices lose response in some cases.
 		 */
-		if ((pdev->device == 0x4386) || (pdev->device == 0x4396)) {
-			p_smbus = pci_get_device(PCI_VENDOR_ID_ATI,
-						 PCI_DEVICE_ID_ATI_SBX00_SMBUS,
-						 NULL);
-			if (!p_smbus)
-				break;
-			rev = p_smbus->revision;
-			if ((pdev->device == 0x4386) || (rev == 0x3a)
-			    || (rev == 0x3b)) {
+		if ((pdev->device == 0x4386 || pdev->device == 0x4396) &&
+				usb_amd_hang_symptom_quirk()) {
 			u8 tmp;
-				ehci_info(ehci, "applying AMD SB600/SB700 USB "
-					"freeze workaround\n");
+			ehci_info(ehci, "applying AMD SB600/SB700 USB freeze workaround\n");
 			pci_read_config_byte(pdev, 0x53, &tmp);
 			pci_write_config_byte(pdev, 0x53, tmp | (1<<3));
 		}
-			pci_dev_put(p_smbus);
-		}
 		break;
 	case PCI_VENDOR_ID_NETMOS:
 		/* MosChip frame-index-register bug */

drivers/usb/host/pci-quirks.c

@@ -262,6 +262,19 @@ int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev)
 }
 EXPORT_SYMBOL_GPL(usb_hcd_amd_remote_wakeup_quirk);
 
+bool usb_amd_hang_symptom_quirk(void)
+{
+	u8 rev;
+
+	usb_amd_find_chipset_info();
+	rev = amd_chipset.sb_type.rev;
+	/* SB600 and old version of SB700 have hang symptom bug */
+	return amd_chipset.sb_type.gen == AMD_CHIPSET_SB600 ||
+			(amd_chipset.sb_type.gen == AMD_CHIPSET_SB700 &&
+			 rev >= 0x3a && rev <= 0x3b);
+}
+EXPORT_SYMBOL_GPL(usb_amd_hang_symptom_quirk);
+
 /*
  * The hardware normally enables the A-link power management feature, which
  * lets the system lower the power consumption in idle states.

drivers/usb/host/pci-quirks.h

@@ -5,6 +5,7 @@
 void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
 int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
 int usb_amd_find_chipset_info(void);
+bool usb_amd_hang_symptom_quirk(void);
 void usb_amd_dev_put(void);
 void usb_amd_quirk_pll_disable(void);
 void usb_amd_quirk_pll_enable(void);