pm80xx: Corrected device state changes in I_T_Nexus_Reset.

In Nexus reset the device state request are not needed.
Signed-off-by: NViswas G <Viswas.G@pmcs.com>
Reviewed-by: NSuresh Thiagarajan <Suresh.Thiagarajan@pmcs.com>
Acked-by: NJack Wang <jinpu.wang@profitbricks.com>
Reviewed-by: NTomas Henzl <thenzl@redhat.com>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>

drivers/scsi/pm8001/pm8001_sas.c

@@ -975,19 +975,27 @@ int pm8001_I_T_nexus_reset(struct domain_device *dev)
 	phy = sas_get_local_phy(dev);
 
 	if (dev_is_sata(dev)) {
-		DECLARE_COMPLETION_ONSTACK(completion_setstate);
 		if (scsi_is_sas_phy_local(phy)) {
 			rc = 0;
 			goto out;
 		}
 		rc = sas_phy_reset(phy, 1);
+		if (rc) {
+			PM8001_EH_DBG(pm8001_ha,
+			pm8001_printk("phy reset failed for device %x\n"
+			"with rc %d\n", pm8001_dev->device_id, rc));
+			rc = TMF_RESP_FUNC_FAILED;
+			goto out;
+		}
 		msleep(2000);
 		rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
 			dev, 1, 0);
-		pm8001_dev->setds_completion = &completion_setstate;
-		rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
-			pm8001_dev, 0x01);
-		wait_for_completion(&completion_setstate);
+		if (rc) {
+			PM8001_EH_DBG(pm8001_ha,
+			pm8001_printk("task abort failed %x\n"
+			"with rc %d\n", pm8001_dev->device_id, rc));
+			rc = TMF_RESP_FUNC_FAILED;
+		}
 	} else {
 		rc = sas_phy_reset(phy, 1);
 		msleep(2000);

drivers/scsi/pm8001/pm8001_sas.h

@@ -569,6 +569,14 @@ struct pm8001_fw_image_header {
 #define	NCQ_READ_LOG_FLAG			0x80000000
 #define	NCQ_ABORT_ALL_FLAG			0x40000000
 #define	NCQ_2ND_RLE_FLAG			0x20000000
+
+/* Device states */
+#define DS_OPERATIONAL				0x01
+#define DS_PORT_IN_RESET			0x02
+#define DS_IN_RECOVERY				0x03
+#define DS_IN_ERROR				0x04
+#define DS_NON_OPERATIONAL			0x07
+
 /**
  * brief param structure for firmware flash update.
  */