提交 360b2eae 编写于 作者: M Mark Brown

Merge remote-tracking branches 'spi/fix/au1550', 'spi/fix/davinci',...

Merge remote-tracking branches 'spi/fix/au1550', 'spi/fix/davinci', 'spi/fix/doc', 'spi/fix/dw', 'spi/fix/omap-mcspi', 'spi/fix/pxa2xx', 'spi/fix/rockchip' and 'spi/fix/rspi' into spi-linus
......@@ -945,7 +945,7 @@ static int au1550_spi_remove(struct platform_device *pdev)
spi_bitbang_stop(&hw->bitbang);
free_irq(hw->irq, hw);
iounmap((void __iomem *)hw->regs);
release_mem_region(r->start, sizeof(psc_spi_t));
release_mem_region(hw->ioarea->start, sizeof(psc_spi_t));
if (hw->usedma) {
au1550_spi_dma_rxtmp_free(hw);
......
......@@ -417,7 +417,6 @@ static int davinci_spi_setup(struct spi_device *spi)
flags, dev_name(&spi->dev));
internal_cs = false;
}
}
if (retval) {
dev_err(&spi->dev, "GPIO %d setup failed (%d)\n",
......@@ -427,6 +426,7 @@ static int davinci_spi_setup(struct spi_device *spi)
if (internal_cs)
set_io_bits(dspi->base + SPIPC0, 1 << spi->chip_select);
}
if (spi->mode & SPI_READY)
set_io_bits(dspi->base + SPIPC0, SPIPC0_SPIENA_MASK);
......
......@@ -62,6 +62,8 @@ static int spi_pci_probe(struct pci_dev *pdev,
if (ret)
return ret;
dws->regs = pcim_iomap_table(pdev)[pci_bar];
dws->bus_num = 0;
dws->num_cs = 4;
dws->irq = pdev->irq;
......
......@@ -271,7 +271,7 @@ static void giveback(struct dw_spi *dws)
transfer_list);
if (!last_transfer->cs_change)
spi_chip_sel(dws, dws->cur_msg->spi, 0);
spi_chip_sel(dws, msg->spi, 0);
spi_finalize_current_message(dws->master);
}
......
......@@ -329,7 +329,8 @@ static void omap2_mcspi_set_fifo(const struct spi_device *spi,
disable_fifo:
if (t->rx_buf != NULL)
chconf &= ~OMAP2_MCSPI_CHCONF_FFER;
else
if (t->tx_buf != NULL)
chconf &= ~OMAP2_MCSPI_CHCONF_FFET;
mcspi_write_chconf0(spi, chconf);
......
......@@ -1074,6 +1074,7 @@ static struct acpi_device_id pxa2xx_spi_acpi_match[] = {
{ "INT3430", 0 },
{ "INT3431", 0 },
{ "80860F0E", 0 },
{ "8086228E", 0 },
{ },
};
MODULE_DEVICE_TABLE(acpi, pxa2xx_spi_acpi_match);
......
......@@ -499,7 +499,7 @@ static void rockchip_spi_config(struct rockchip_spi *rs)
}
/* div doesn't support odd number */
div = rs->max_freq / rs->speed;
div = max_t(u32, rs->max_freq / rs->speed, 1);
div = (div + 1) & 0xfffe;
spi_enable_chip(rs, 0);
......@@ -678,7 +678,7 @@ static int rockchip_spi_probe(struct platform_device *pdev)
rs->dma_tx.addr = (dma_addr_t)(mem->start + ROCKCHIP_SPI_TXDR);
rs->dma_rx.addr = (dma_addr_t)(mem->start + ROCKCHIP_SPI_RXDR);
rs->dma_tx.direction = DMA_MEM_TO_DEV;
rs->dma_tx.direction = DMA_DEV_TO_MEM;
rs->dma_rx.direction = DMA_DEV_TO_MEM;
master->can_dma = rockchip_spi_can_dma;
master->dma_tx = rs->dma_tx.ch;
......
......@@ -472,23 +472,50 @@ static int rspi_dma_transfer(struct rspi_data *rspi, struct sg_table *tx,
dma_cookie_t cookie;
int ret;
/* First prepare and submit the DMA request(s), as this may fail */
if (rx) {
desc_rx = dmaengine_prep_slave_sg(rspi->master->dma_rx,
rx->sgl, rx->nents, DMA_FROM_DEVICE,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!desc_rx) {
ret = -EAGAIN;
goto no_dma_rx;
}
desc_rx->callback = rspi_dma_complete;
desc_rx->callback_param = rspi;
cookie = dmaengine_submit(desc_rx);
if (dma_submit_error(cookie)) {
ret = cookie;
goto no_dma_rx;
}
irq_mask |= SPCR_SPRIE;
}
if (tx) {
desc_tx = dmaengine_prep_slave_sg(rspi->master->dma_tx,
tx->sgl, tx->nents, DMA_TO_DEVICE,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!desc_tx)
goto no_dma;
irq_mask |= SPCR_SPTIE;
if (!desc_tx) {
ret = -EAGAIN;
goto no_dma_tx;
}
if (rx) {
desc_rx = dmaengine_prep_slave_sg(rspi->master->dma_rx,
rx->sgl, rx->nents, DMA_FROM_DEVICE,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!desc_rx)
goto no_dma;
/* No callback */
desc_tx->callback = NULL;
} else {
desc_tx->callback = rspi_dma_complete;
desc_tx->callback_param = rspi;
}
cookie = dmaengine_submit(desc_tx);
if (dma_submit_error(cookie)) {
ret = cookie;
goto no_dma_tx;
}
irq_mask |= SPCR_SPRIE;
irq_mask |= SPCR_SPTIE;
}
/*
......@@ -503,34 +530,24 @@ static int rspi_dma_transfer(struct rspi_data *rspi, struct sg_table *tx,
rspi_enable_irq(rspi, irq_mask);
rspi->dma_callbacked = 0;
if (rx) {
desc_rx->callback = rspi_dma_complete;
desc_rx->callback_param = rspi;
cookie = dmaengine_submit(desc_rx);
if (dma_submit_error(cookie))
return cookie;
/* Now start DMA */
if (rx)
dma_async_issue_pending(rspi->master->dma_rx);
}
if (tx) {
if (rx) {
/* No callback */
desc_tx->callback = NULL;
} else {
desc_tx->callback = rspi_dma_complete;
desc_tx->callback_param = rspi;
}
cookie = dmaengine_submit(desc_tx);
if (dma_submit_error(cookie))
return cookie;
if (tx)
dma_async_issue_pending(rspi->master->dma_tx);
}
ret = wait_event_interruptible_timeout(rspi->wait,
rspi->dma_callbacked, HZ);
if (ret > 0 && rspi->dma_callbacked)
ret = 0;
else if (!ret)
else if (!ret) {
dev_err(&rspi->master->dev, "DMA timeout\n");
ret = -ETIMEDOUT;
if (tx)
dmaengine_terminate_all(rspi->master->dma_tx);
if (rx)
dmaengine_terminate_all(rspi->master->dma_rx);
}
rspi_disable_irq(rspi, irq_mask);
......@@ -541,11 +558,16 @@ static int rspi_dma_transfer(struct rspi_data *rspi, struct sg_table *tx,
return ret;
no_dma:
no_dma_tx:
if (rx)
dmaengine_terminate_all(rspi->master->dma_rx);
no_dma_rx:
if (ret == -EAGAIN) {
pr_warn_once("%s %s: DMA not available, falling back to PIO\n",
dev_driver_string(&rspi->master->dev),
dev_name(&rspi->master->dev));
return -EAGAIN;
}
return ret;
}
static void rspi_receive_init(const struct rspi_data *rspi)
......
......@@ -848,6 +848,7 @@ static int spi_transfer_one_message(struct spi_master *master,
/**
* spi_finalize_current_transfer - report completion of a transfer
* @master: the master reporting completion
*
* Called by SPI drivers using the core transfer_one_message()
* implementation to notify it that the current interrupt driven
......
......@@ -253,6 +253,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
* the device whose settings are being modified.
* @transfer: adds a message to the controller's transfer queue.
* @cleanup: frees controller-specific state
* @can_dma: determine whether this master supports DMA
* @queued: whether this master is providing an internal message queue
* @kworker: thread struct for message pump
* @kworker_task: pointer to task for message pump kworker thread
......@@ -262,6 +263,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
* @cur_msg: the currently in-flight message
* @cur_msg_prepared: spi_prepare_message was called for the currently
* in-flight message
* @cur_msg_mapped: message has been mapped for DMA
* @xfer_completion: used by core transfer_one_message()
* @busy: message pump is busy
* @running: message pump is running
......@@ -299,6 +301,10 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
* @cs_gpios: Array of GPIOs to use as chip select lines; one per CS
* number. Any individual value may be -ENOENT for CS lines that
* are not GPIOs (driven by the SPI controller itself).
* @dma_tx: DMA transmit channel
* @dma_rx: DMA receive channel
* @dummy_rx: dummy receive buffer for full-duplex devices
* @dummy_tx: dummy transmit buffer for full-duplex devices
*
* Each SPI master controller can communicate with one or more @spi_device
* children. These make a small bus, sharing MOSI, MISO and SCK signals
......@@ -632,6 +638,7 @@ struct spi_transfer {
* addresses for each transfer buffer
* @complete: called to report transaction completions
* @context: the argument to complete() when it's called
* @frame_length: the total number of bytes in the message
* @actual_length: the total number of bytes that were transferred in all
* successful segments
* @status: zero for success, else negative errno
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册