提交 35b19ba5 编写于 作者: E Eilon Greenstein 提交者: David S. Miller

bnx2x: Removing the board type

There are too many different board types and this field is not scalable.
Removing it and making decisions according to other fields
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 1c06328c
......@@ -523,7 +523,6 @@ struct bnx2x_common {
u32 shmem_base;
u32 hw_config;
u32 board;
u32 bc_ver;
......
......@@ -119,35 +119,15 @@ struct shared_hw_cfg { /* NVRAM Offset */
#define SHARED_HW_CFG_UMP_NC_SI_EXT_PHY_TYPE_BCM5221 0x00010000
u32 board; /* 0x124 */
#define SHARED_HW_CFG_BOARD_TYPE_MASK 0x0000ffff
#define SHARED_HW_CFG_BOARD_TYPE_SHIFT 0
#define SHARED_HW_CFG_BOARD_TYPE_NONE 0x00000000
#define SHARED_HW_CFG_BOARD_TYPE_BCM957710T1000 0x00000001
#define SHARED_HW_CFG_BOARD_TYPE_BCM957710T1001 0x00000002
#define SHARED_HW_CFG_BOARD_TYPE_BCM957710T1002G 0x00000003
#define SHARED_HW_CFG_BOARD_TYPE_BCM957710T1004G 0x00000004
#define SHARED_HW_CFG_BOARD_TYPE_BCM957710T1007G 0x00000005
#define SHARED_HW_CFG_BOARD_TYPE_BCM957710T1015G 0x00000006
#define SHARED_HW_CFG_BOARD_TYPE_BCM957710A1020G 0x00000007
#define SHARED_HW_CFG_BOARD_TYPE_BCM957710T1003G 0x00000008
#define SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G 0x00000009
#define SHARED_HW_CFG_BOARD_TYPE_BCM957710A1021G 0x0000000a
#define SHARED_HW_CFG_BOARD_TYPE_BCM957710A1023G 0x0000000b
#define SHARED_HW_CFG_BOARD_TYPE_BCM957710A1033G 0x0000000c
#define SHARED_HW_CFG_BOARD_TYPE_BCM957711T1101 0x0000000d
#define SHARED_HW_CFG_BOARD_TYPE_BCM957711ET1201 0x0000000e
#define SHARED_HW_CFG_BOARD_TYPE_BCM957711A1133G 0x0000000f
#define SHARED_HW_CFG_BOARD_TYPE_BCM957711EA1233G 0x00000010
#define SHARED_HW_CFG_BOARD_VER_MASK 0xffff0000
#define SHARED_HW_CFG_BOARD_VER_SHIFT 16
#define SHARED_HW_CFG_BOARD_MAJOR_VER_MASK 0xf0000000
#define SHARED_HW_CFG_BOARD_MAJOR_VER_SHIFT 28
#define SHARED_HW_CFG_BOARD_MINOR_VER_MASK 0x0f000000
#define SHARED_HW_CFG_BOARD_MINOR_VER_SHIFT 24
#define SHARED_HW_CFG_BOARD_REV_MASK 0x00ff0000
#define SHARED_HW_CFG_BOARD_REV_MASK 0x00FF0000
#define SHARED_HW_CFG_BOARD_REV_SHIFT 16
#define SHARED_HW_CFG_BOARD_MAJOR_VER_MASK 0x0F000000
#define SHARED_HW_CFG_BOARD_MAJOR_VER_SHIFT 24
#define SHARED_HW_CFG_BOARD_MINOR_VER_MASK 0xF0000000
#define SHARED_HW_CFG_BOARD_MINOR_VER_SHIFT 28
u32 reserved; /* 0x128 */
};
......
......@@ -2505,9 +2505,8 @@ static inline void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn)
BNX2X_ERR("SPIO5 hw attention\n");
switch (bp->common.board & SHARED_HW_CFG_BOARD_TYPE_MASK) {
case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1021G:
case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G:
switch (XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config)) {
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
/* Fan failure attention */
/* The PHY reset is controlled by GPIO 1 */
......@@ -5622,9 +5621,8 @@ static int bnx2x_init_common(struct bnx2x *bp)
return -EBUSY;
}
switch (bp->common.board & SHARED_HW_CFG_BOARD_TYPE_MASK) {
case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1021G:
case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G:
switch (XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config)) {
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
/* Fan failure is indicated by SPIO 5 */
bnx2x_set_spio(bp, MISC_REGISTERS_SPIO_5,
MISC_REGISTERS_SPIO_INPUT_HI_Z);
......@@ -5830,9 +5828,8 @@ static int bnx2x_init_port(struct bnx2x *bp)
/* Port MCP comes here */
/* Port DMAE comes here */
switch (bp->common.board & SHARED_HW_CFG_BOARD_TYPE_MASK) {
case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1021G:
case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G:
switch (XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config)) {
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
/* add SPIO 5 to group 0 */
val = REG_RD(bp, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
val |= AEU_INPUTS_ATTN_BITS_SPIO5;
......@@ -7433,10 +7430,7 @@ static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp)
BNX2X_ERR("BAD MCP validity signature\n");
bp->common.hw_config = SHMEM_RD(bp, dev_info.shared_hw_config.config);
bp->common.board = SHMEM_RD(bp, dev_info.shared_hw_config.board);
BNX2X_DEV_INFO("hw_config 0x%08x board 0x%08x\n",
bp->common.hw_config, bp->common.board);
BNX2X_DEV_INFO("hw_config 0x%08x\n", bp->common.hw_config);
bp->link_params.hw_led_mode = ((bp->common.hw_config &
SHARED_HW_CFG_LED_MODE_MASK) >>
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册