提交 34aac66c 编写于 作者: F françois romieu 提交者: David S. Miller

atl1c: remove private #define.

Either unused or duplicates from mii.h.
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>
Cc: Jay Cliburn <jcliburn@gmail.com>
Cc: Chris Snook <chris.snook@gmail.com>
Cc: Jie Yang <jie.yang@atheros.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 bced94ed
......@@ -345,7 +345,7 @@ int atl1c_write_phy_reg(struct atl1c_hw *hw, u32 reg_addr, u16 phy_data)
*/
static int atl1c_phy_setup_adv(struct atl1c_hw *hw)
{
u16 mii_adv_data = ADVERTISE_DEFAULT_CAP & ~ADVERTISE_SPEED_MASK;
u16 mii_adv_data = ADVERTISE_DEFAULT_CAP & ~ADVERTISE_ALL;
u16 mii_giga_ctrl_data = GIGA_CR_1000T_DEFAULT_CAP &
~GIGA_CR_1000T_SPEED_MASK;
......@@ -373,7 +373,7 @@ static int atl1c_phy_setup_adv(struct atl1c_hw *hw)
}
if (atl1c_write_phy_reg(hw, MII_ADVERTISE, mii_adv_data) != 0 ||
atl1c_write_phy_reg(hw, MII_GIGA_CR, mii_giga_ctrl_data) != 0)
atl1c_write_phy_reg(hw, MII_CTRL1000, mii_giga_ctrl_data) != 0)
return -1;
return 0;
}
......@@ -517,19 +517,18 @@ int atl1c_phy_init(struct atl1c_hw *hw)
"Error Setting up Auto-Negotiation\n");
return ret_val;
}
mii_bmcr_data |= BMCR_AUTO_NEG_EN | BMCR_RESTART_AUTO_NEG;
mii_bmcr_data |= BMCR_ANENABLE | BMCR_ANRESTART;
break;
case MEDIA_TYPE_100M_FULL:
mii_bmcr_data |= BMCR_SPEED_100 | BMCR_FULL_DUPLEX;
mii_bmcr_data |= BMCR_SPEED100 | BMCR_FULLDPLX;
break;
case MEDIA_TYPE_100M_HALF:
mii_bmcr_data |= BMCR_SPEED_100;
mii_bmcr_data |= BMCR_SPEED100;
break;
case MEDIA_TYPE_10M_FULL:
mii_bmcr_data |= BMCR_SPEED_10 | BMCR_FULL_DUPLEX;
mii_bmcr_data |= BMCR_FULLDPLX;
break;
case MEDIA_TYPE_10M_HALF:
mii_bmcr_data |= BMCR_SPEED_10;
break;
default:
if (netif_msg_link(adapter))
......@@ -657,7 +656,7 @@ int atl1c_restart_autoneg(struct atl1c_hw *hw)
err = atl1c_phy_setup_adv(hw);
if (err)
return err;
mii_bmcr_data |= BMCR_AUTO_NEG_EN | BMCR_RESTART_AUTO_NEG;
mii_bmcr_data |= BMCR_ANENABLE | BMCR_ANRESTART;
return atl1c_write_phy_reg(hw, MII_BMCR, mii_bmcr_data);
}
......@@ -736,55 +736,16 @@ int atl1c_phy_power_saving(struct atl1c_hw *hw);
#define REG_DEBUG_DATA0 0x1900
#define REG_DEBUG_DATA1 0x1904
/* PHY Control Register */
#define MII_BMCR 0x00
#define BMCR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */
#define BMCR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */
#define BMCR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
#define BMCR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
#define BMCR_ISOLATE 0x0400 /* Isolate PHY from MII */
#define BMCR_POWER_DOWN 0x0800 /* Power down */
#define BMCR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
#define BMCR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */
#define BMCR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */
#define BMCR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */
#define BMCR_SPEED_MASK 0x2040
#define BMCR_SPEED_1000 0x0040
#define BMCR_SPEED_100 0x2000
#define BMCR_SPEED_10 0x0000
/* PHY Status Register */
#define MII_BMSR 0x01
#define BMMSR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */
#define BMSR_JABBER_DETECT 0x0002 /* Jabber Detected */
#define BMSR_LINK_STATUS 0x0004 /* Link Status 1 = link */
#define BMSR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */
#define BMSR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */
#define BMSR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */
#define BMSR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
#define BMSR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */
#define BMSR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */
#define BMSR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */
#define BMSR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */
#define BMSR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */
#define BMSR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */
#define BMMII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */
#define BMMII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */
#define MII_PHYSID1 0x02
#define MII_PHYSID2 0x03
#define L1D_MPW_PHYID1 0xD01C /* V7 */
#define L1D_MPW_PHYID2 0xD01D /* V1-V6 */
#define L1D_MPW_PHYID3 0xD01E /* V8 */
/* Autoneg Advertisement Register */
#define MII_ADVERTISE 0x04
#define ADVERTISE_SPEED_MASK 0x01E0
#define ADVERTISE_DEFAULT_CAP 0x0DE0
#define ADVERTISE_DEFAULT_CAP \
(ADVERTISE_ALL | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM)
/* 1000BASE-T Control Register */
#define MII_GIGA_CR 0x09
#define GIGA_CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port 0=DTE device */
#define GIGA_CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master 0=Configure PHY as Slave */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册