提交 33cb5243 编写于 作者: H Harvey Harrison 提交者: Ingo Molnar

x86: cosmetic fixes fault_{32|64}.c

First step towards unifying these files.
- Checkpatch trailing whitespace fixes
- Checkpatch indentation of switch statement fixes
- Checkpatch single statement ifs need no braces fixes
- Checkpatch consistent spacing after comma fixes
- Introduce defines for pagefault error bits from X86_64 and add useful
  comment from X86_32.  Use these defines in X86_32 where obvious.
- Unify comments between 32|64 bit
- Small ifdef movement for CONFIG_KPROBES in notify_page_fault()
- Introduce X86_64 only case statement

No Functional Changes.
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
上级 1d16b53e
/*
* linux/arch/i386/mm/fault.c
*
* Copyright (C) 1995 Linus Torvalds
*/
......@@ -30,11 +28,25 @@
#include <asm/desc.h>
#include <asm/segment.h>
extern void die(const char *,struct pt_regs *,long);
/*
* Page fault error code bits
* bit 0 == 0 means no page found, 1 means protection fault
* bit 1 == 0 means read, 1 means write
* bit 2 == 0 means kernel, 1 means user-mode
* bit 3 == 1 means use of reserved bit detected
* bit 4 == 1 means fault was an instruction fetch
*/
#define PF_PROT (1<<0)
#define PF_WRITE (1<<1)
#define PF_USER (1<<2)
#define PF_RSVD (1<<3)
#define PF_INSTR (1<<4)
extern void die(const char *, struct pt_regs *, long);
#ifdef CONFIG_KPROBES
static inline int notify_page_fault(struct pt_regs *regs)
{
#ifdef CONFIG_KPROBES
int ret = 0;
/* kprobe_running() needs smp_processor_id() */
......@@ -46,13 +58,10 @@ static inline int notify_page_fault(struct pt_regs *regs)
}
return ret;
}
#else
static inline int notify_page_fault(struct pt_regs *regs)
{
return 0;
}
#endif
}
/*
* Return EIP plus the CS segment base. The segment limit is also
......@@ -116,9 +125,9 @@ static inline unsigned long get_segment_eip(struct pt_regs *regs,
/* Decode the code segment base from the descriptor */
base = get_desc_base((struct desc_struct *)desc);
if (seg & (1<<2)) {
if (seg & (1<<2))
mutex_unlock(&current->mm->context.lock);
} else
else
put_cpu();
/* Adjust EIP and segment limit, and clamp at the kernel limit.
......@@ -136,7 +145,7 @@ static inline unsigned long get_segment_eip(struct pt_regs *regs,
static int __is_prefetch(struct pt_regs *regs, unsigned long addr)
{
unsigned long limit;
unsigned char *instr = (unsigned char *)get_segment_eip (regs, &limit);
unsigned char *instr = (unsigned char *)get_segment_eip(regs, &limit);
int scan_more = 1;
int prefetch = 0;
int i;
......@@ -158,16 +167,32 @@ static int __is_prefetch(struct pt_regs *regs, unsigned long addr)
switch (instr_hi) {
case 0x20:
case 0x30:
/* Values 0x26,0x2E,0x36,0x3E are valid x86 prefixes. */
/*
* Values 0x26,0x2E,0x36,0x3E are valid x86 prefixes.
* In X86_64 long mode, the CPU will signal invalid
* opcode if some of these prefixes are present so
* X86_64 will never get here anyway
*/
scan_more = ((instr_lo & 7) == 0x6);
break;
#ifdef CONFIG_X86_64
case 0x40:
/*
* In AMD64 long mode 0x40..0x4F are valid REX prefixes
* Need to figure out under what instruction mode the
* instruction was issued. Could check the LDT for lm,
* but for now it's good enough to assume that long
* mode only uses well known segments or kernel.
*/
scan_more = (!user_mode(regs)) || (regs->cs == __USER_CS);
break;
#endif
case 0x60:
/* 0x64 thru 0x67 are valid prefixes in all modes. */
scan_more = (instr_lo & 0xC) == 0x4;
break;
case 0xF0:
/* 0xF0, 0xF2, and 0xF3 are valid prefixes */
/* 0xF0, 0xF2, 0xF3 are valid prefixes in all modes. */
scan_more = !instr_lo || (instr_lo>>1) == 1;
break;
case 0x00:
......@@ -284,19 +309,12 @@ int show_unhandled_signals = 1;
* This routine handles page faults. It determines the address,
* and the problem, and then passes it off to one of the appropriate
* routines.
*
* error_code:
* bit 0 == 0 means no page found, 1 means protection fault
* bit 1 == 0 means read, 1 means write
* bit 2 == 0 means kernel, 1 means user-mode
* bit 3 == 1 means use of reserved bit detected
* bit 4 == 1 means fault was an instruction fetch
*/
void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)
{
struct task_struct *tsk;
struct mm_struct *mm;
struct vm_area_struct * vma;
struct vm_area_struct *vma;
unsigned long address;
int write, si_code;
int fault;
......@@ -350,7 +368,7 @@ void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)
/*
* If we're in an interrupt, have no user context or are running in an
* atomic region then we must not take the fault..
* atomic region then we must not take the fault.
*/
if (in_atomic() || !mm)
goto bad_area_nosemaphore;
......@@ -371,7 +389,7 @@ void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)
* thus avoiding the deadlock.
*/
if (!down_read_trylock(&mm->mmap_sem)) {
if ((error_code & 4) == 0 &&
if ((error_code & PF_USER) == 0 &&
!search_exception_tables(regs->ip))
goto bad_area_nosemaphore;
down_read(&mm->mmap_sem);
......@@ -384,7 +402,7 @@ void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)
goto good_area;
if (!(vma->vm_flags & VM_GROWSDOWN))
goto bad_area;
if (error_code & 4) {
if (error_code & PF_USER) {
/*
* Accessing the stack below %sp is always a bug.
* The large cushion allows instructions like enter
......@@ -403,15 +421,15 @@ void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)
good_area:
si_code = SEGV_ACCERR;
write = 0;
switch (error_code & 3) {
switch (error_code & (PF_PROT|PF_WRITE)) {
default: /* 3: write, present */
/* fall through */
case 2: /* write, not present */
case PF_WRITE: /* write, not present */
if (!(vma->vm_flags & VM_WRITE))
goto bad_area;
write++;
break;
case 1: /* read, present */
case PF_PROT: /* read, present */
goto bad_area;
case 0: /* read, not present */
if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE)))
......@@ -457,7 +475,7 @@ void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)
bad_area_nosemaphore:
/* User mode accesses just cause a SIGSEGV */
if (error_code & 4) {
if (error_code & PF_USER) {
/*
* It's possible to have interrupts off here.
*/
......@@ -541,7 +559,7 @@ void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)
else
printk(KERN_ALERT "BUG: unable to handle kernel paging"
" request");
printk(" at virtual address %08lx\n",address);
printk(" at virtual address %08lx\n", address);
printk(KERN_ALERT "printing ip: %08lx ", regs->ip);
page = read_cr3();
......@@ -605,7 +623,7 @@ void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)
up_read(&mm->mmap_sem);
/* Kernel mode? Handle exceptions or die */
if (!(error_code & 4))
if (!(error_code & PF_USER))
goto no_context;
/* User space => ok to do another page fault */
......
/*
* linux/arch/x86-64/mm/fault.c
*
* Copyright (C) 1995 Linus Torvalds
* Copyright (C) 2001,2002 Andi Kleen, SuSE Labs.
*/
......@@ -33,16 +31,23 @@
#include <asm/proto.h>
#include <asm-generic/sections.h>
/* Page fault error code bits */
#define PF_PROT (1<<0) /* or no page found */
/*
* Page fault error code bits
* bit 0 == 0 means no page found, 1 means protection fault
* bit 1 == 0 means read, 1 means write
* bit 2 == 0 means kernel, 1 means user-mode
* bit 3 == 1 means use of reserved bit detected
* bit 4 == 1 means fault was an instruction fetch
*/
#define PF_PROT (1<<0)
#define PF_WRITE (1<<1)
#define PF_USER (1<<2)
#define PF_RSVD (1<<3)
#define PF_INSTR (1<<4)
#ifdef CONFIG_KPROBES
static inline int notify_page_fault(struct pt_regs *regs)
{
#ifdef CONFIG_KPROBES
int ret = 0;
/* kprobe_running() needs smp_processor_id() */
......@@ -54,13 +59,10 @@ static inline int notify_page_fault(struct pt_regs *regs)
}
return ret;
}
#else
static inline int notify_page_fault(struct pt_regs *regs)
{
return 0;
}
#endif
}
/* Sometimes the CPU reports invalid exceptions on prefetch.
Check that here and ignore.
......@@ -98,23 +100,26 @@ static noinline int is_prefetch(struct pt_regs *regs, unsigned long addr,
switch (instr_hi) {
case 0x20:
case 0x30:
/* Values 0x26,0x2E,0x36,0x3E are valid x86
prefixes. In long mode, the CPU will signal
invalid opcode if some of these prefixes are
present so we will never get here anyway */
/*
* Values 0x26,0x2E,0x36,0x3E are valid x86 prefixes.
* In X86_64 long mode, the CPU will signal invalid
* opcode if some of these prefixes are present so
* X86_64 will never get here anyway
*/
scan_more = ((instr_lo & 7) == 0x6);
break;
#ifdef CONFIG_X86_64
case 0x40:
/* In AMD64 long mode, 0x40 to 0x4F are valid REX prefixes
Need to figure out under what instruction mode the
instruction was issued ... */
/* Could check the LDT for lm, but for now it's good
enough to assume that long mode only uses well known
segments or kernel. */
/*
* In AMD64 long mode 0x40..0x4F are valid REX prefixes
* Need to figure out under what instruction mode the
* instruction was issued. Could check the LDT for lm,
* but for now it's good enough to assume that long
* mode only uses well known segments or kernel.
*/
scan_more = (!user_mode(regs)) || (regs->cs == __USER_CS);
break;
#endif
case 0x60:
/* 0x64 thru 0x67 are valid prefixes in all modes. */
scan_more = (instr_lo & 0xC) == 0x4;
......@@ -296,7 +301,7 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
{
struct task_struct *tsk;
struct mm_struct *mm;
struct vm_area_struct * vma;
struct vm_area_struct *vma;
unsigned long address;
int write, fault;
unsigned long flags;
......@@ -360,8 +365,8 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
pgtable_bad(address, regs, error_code);
/*
* If we're in an interrupt or have no user
* context, we must not take the fault..
* If we're in an interrupt, have no user context or are running in an
* atomic region then we must not take the fault.
*/
if (unlikely(in_atomic() || !mm))
goto bad_area_nosemaphore;
......@@ -403,7 +408,7 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
goto good_area;
if (!(vma->vm_flags & VM_GROWSDOWN))
goto bad_area;
if (error_code & 4) {
if (error_code & PF_USER) {
/* Allow userspace just enough access below the stack pointer
* to let the 'enter' instruction work.
*/
......@@ -505,11 +510,9 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
}
no_context:
/* Are we prepared to handle this kernel fault? */
if (fixup_exception(regs)) {
if (fixup_exception(regs))
return;
}
/*
* Hall of shame of CPU/BIOS bugs.
......@@ -532,7 +535,7 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference");
else
printk(KERN_ALERT "Unable to handle kernel paging request");
printk(" at %016lx RIP: \n" KERN_ALERT,address);
printk(" at %016lx RIP: \n" KERN_ALERT, address);
printk_address(regs->ip);
dump_pagetable(address);
tsk->thread.cr2 = address;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册