提交 3274c570 编写于 作者: M Michal Simek

microblaze: Optimize CACHE_LOOP_LIMITS and CACHE_RANGE_LOOP macros

1. Remove CACHE_ALL_LOOP2 macro because it is identical to CACHE_ALL_LOOP
2. Change BUG_ON to WARN_ON
3. Remove end aligned from CACHE_LOOP_LIMITS.
C implementation do not need aligned end address and ASM code do aligned
in their macros
4. ASM optimized  CACHE_RANGE_LOOP_1/2 macros needs to get aligned end address.
Because end address is compound from start + size, end address is the first address
which is exclude.

Here is the corresponding code which describe it.
+       int align = ~(line_length - 1);
+       end = ((end & align) == end) ? end - line_length : end & align;

a) end is aligned:
it is necessary to subtruct line length because we don't want to work with
next cacheline
b) end address is not aligned:
Just align it to be ready for ASM code.
Signed-off-by: NMichal Simek <monstr@monstr.eu>
上级 385e1efa
......@@ -96,13 +96,16 @@ static inline void __disable_dcache_nomsr(void)
}
/* Helper macro for computing the limits of cache range loops */
/* Helper macro for computing the limits of cache range loops
*
* End address can be unaligned which is OK for C implementation.
* ASM implementation align it in ASM macros
*/
#define CACHE_LOOP_LIMITS(start, end, cache_line_length, cache_size) \
do { \
int align = ~(cache_line_length - 1); \
end = min(start + cache_size, end); \
start &= align; \
end = ((end & align) + cache_line_length); \
} while (0);
/*
......@@ -111,9 +114,9 @@ do { \
*/
#define CACHE_ALL_LOOP(cache_size, line_length, op) \
do { \
unsigned int len = cache_size; \
unsigned int len = cache_size - line_length; \
int step = -line_length; \
BUG_ON(step >= 0); \
WARN_ON(step >= 0); \
\
__asm__ __volatile__ (" 1: " #op " %0, r0; \
bgtid %0, 1b; \
......@@ -122,26 +125,21 @@ do { \
: "memory"); \
} while (0);
#define CACHE_ALL_LOOP2(cache_size, line_length, op) \
do { \
unsigned int len = cache_size; \
int step = -line_length; \
BUG_ON(step >= 0); \
\
__asm__ __volatile__ (" 1: " #op " r0, %0; \
bgtid %0, 1b; \
addk %0, %0, %1; \
" : : "r" (len), "r" (step) \
: "memory"); \
} while (0);
/* for wdc.flush/clear */
/* Used for wdc.flush/clear which can use rB for offset which is not possible
* to use for simple wdc or wic.
*
* start address is cache aligned
* end address is not aligned, if end is aligned then I have to substract
* cacheline length because I can't flush/invalidate the next cacheline.
* If is not, I align it because I will flush/invalidate whole line.
*/
#define CACHE_RANGE_LOOP_2(start, end, line_length, op) \
do { \
int step = -line_length; \
int align = ~(line_length - 1); \
end = ((end & align) == end) ? end - line_length : end & align; \
int count = end - start; \
BUG_ON(count <= 0); \
WARN_ON(count < 0); \
\
__asm__ __volatile__ (" 1: " #op " %0, %1; \
bgtid %1, 1b; \
......@@ -154,7 +152,9 @@ do { \
#define CACHE_RANGE_LOOP_1(start, end, line_length, op) \
do { \
int volatile temp; \
BUG_ON(end - start <= 0); \
int align = ~(line_length - 1); \
end = ((end & align) == end) ? end - line_length : end & align; \
WARN_ON(end - start < 0); \
\
__asm__ __volatile__ (" 1: " #op " %1, r0; \
cmpu %0, %1, %2; \
......@@ -360,8 +360,12 @@ static void __invalidate_dcache_all_noirq_wt(void)
#endif
}
/* FIXME this is weird - should be only wdc but not work
* MS: I am getting bus errors and other weird things */
/* FIXME It is blindly invalidation as is expected
* but can't be called on noMMU in microblaze_cache_init below
*
* MS: noMMU kernel won't boot if simple wdc is used
* The reason should be that there are discared data which kernel needs
*/
static void __invalidate_dcache_all_wb(void)
{
#ifndef ASM_LOOP
......@@ -369,12 +373,12 @@ static void __invalidate_dcache_all_wb(void)
#endif
pr_debug("%s\n", __func__);
#ifdef ASM_LOOP
CACHE_ALL_LOOP2(cpuinfo.dcache_size, cpuinfo.dcache_line_length,
wdc.clear)
CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length,
wdc)
#else
for (i = 0; i < cpuinfo.dcache_size;
i += cpuinfo.dcache_line_length)
__asm__ __volatile__ ("wdc.clear %0, r0;" \
__asm__ __volatile__ ("wdc %0, r0;" \
: : "r" (i));
#endif
}
......@@ -650,7 +654,11 @@ void microblaze_cache_init(void)
}
}
}
invalidate_dcache();
/* FIXME Invalidation is done in U-BOOT
* WT cache: Data is already written to main memory
* WB cache: Discard data on noMMU which caused that kernel doesn't boot
*/
/* invalidate_dcache(); */
enable_dcache();
invalidate_icache();
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册