diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 73260364cba3f9c590dbc05775868d7ce62283c8..3086e52032a83bc372b404b76c6f8911349924de 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -61,10 +61,6 @@ * a receive requires one (or two if using 64 bit dma). */ -#define is_ec_a1(hw) \ - unlikely((hw)->chip_id == CHIP_ID_YUKON_EC && \ - (hw)->chip_rev == CHIP_REV_YU_EC_A1) - #define RX_LE_SIZE 512 #define RX_LE_BYTES (RX_LE_SIZE*sizeof(struct sky2_rx_le)) #define RX_MAX_PENDING (RX_LE_SIZE/2 - 2) @@ -725,37 +721,11 @@ static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2) return le; } -/* - * This is a workaround code taken from SysKonnect sk98lin driver - * to deal with chip bug on Yukon EC rev 0 in the wraparound case. - */ -static void sky2_put_idx(struct sky2_hw *hw, unsigned q, - u16 idx, u16 *last, u16 size) +/* Update chip's next pointer */ +static inline void sky2_put_idx(struct sky2_hw *hw, unsigned q, u16 idx) { wmb(); - if (is_ec_a1(hw) && idx < *last) { - u16 hwget = sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_GET_IDX)); - - if (hwget == 0) { - /* Start prefetching again */ - sky2_write8(hw, Y2_QADDR(q, PREF_UNIT_FIFO_WM), 0xe0); - goto setnew; - } - - if (hwget == size - 1) { - /* set watermark to one list element */ - sky2_write8(hw, Y2_QADDR(q, PREF_UNIT_FIFO_WM), 8); - - /* set put index to first list element */ - sky2_write16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX), 0); - } else /* have hardware go to end of list */ - sky2_write16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX), - size - 1); - } else { -setnew: - sky2_write16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX), idx); - } - *last = idx; + sky2_write16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX), idx); mmiowb(); } @@ -1001,7 +971,6 @@ static int sky2_rx_start(struct sky2_port *sky2) /* Tell chip about available buffers */ sky2_write16(hw, Y2_QADDR(rxq, PREF_UNIT_PUT_IDX), sky2->rx_put); - sky2->rx_last_put = sky2_read16(hw, Y2_QADDR(rxq, PREF_UNIT_PUT_IDX)); return 0; nomem: sky2_rx_clean(sky2); @@ -1299,8 +1268,7 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) netif_stop_queue(dev); } - sky2_put_idx(hw, txqaddr[sky2->port], sky2->tx_prod, - &sky2->tx_last_put, TX_RING_SIZE); + sky2_put_idx(hw, txqaddr[sky2->port], sky2->tx_prod); out_unlock: spin_unlock(&sky2->tx_lock); @@ -1843,8 +1811,7 @@ static struct sk_buff *sky2_receive(struct sky2_port *sky2, sky2_rx_add(sky2, re->mapaddr); /* Tell receiver about new buffers. */ - sky2_put_idx(sky2->hw, rxqaddr[sky2->port], sky2->rx_put, - &sky2->rx_last_put, RX_LE_SIZE); + sky2_put_idx(sky2->hw, rxqaddr[sky2->port], sky2->rx_put); return skb; @@ -2238,6 +2205,23 @@ static int sky2_reset(struct sky2_hw *hw) return -EOPNOTSUPP; } + hw->chip_rev = (sky2_read8(hw, B2_MAC_CFG) & CFG_CHIP_R_MSK) >> 4; + + /* This rev is really old, and requires untested workarounds */ + if (hw->chip_id == CHIP_ID_YUKON_EC && hw->chip_rev == CHIP_REV_YU_EC_A1) { + printk(KERN_ERR PFX "%s: unsupported revision Yukon-%s (0x%x) rev %d\n", + pci_name(hw->pdev), yukon2_name[hw->chip_id - CHIP_ID_YUKON_XL], + hw->chip_id, hw->chip_rev); + return -EOPNOTSUPP; + } + + /* This chip is new and not tested yet */ + if (hw->chip_id == CHIP_ID_YUKON_EC_U) { + pr_info(PFX "%s: is a version of Yukon 2 chipset that has not been tested yet.\n", + pci_name(hw->pdev)); + pr_info("Please report success/failure to maintainer \n"); + } + /* disable ASF */ if (hw->chip_id <= CHIP_ID_YUKON_EC) { sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET); @@ -2271,7 +2255,6 @@ static int sky2_reset(struct sky2_hw *hw) if (!(sky2_read8(hw, B2_Y2_CLK_GATE) & Y2_STATUS_LNK2_INAC)) ++hw->ports; } - hw->chip_rev = (sky2_read8(hw, B2_MAC_CFG) & CFG_CHIP_R_MSK) >> 4; sky2_set_power_state(hw, PCI_D0); @@ -2338,29 +2321,17 @@ static int sky2_reset(struct sky2_hw *hw) sky2_write16(hw, STAT_LAST_IDX, STATUS_RING_SIZE - 1); /* These status setup values are copied from SysKonnect's driver */ - if (is_ec_a1(hw)) { - /* WA for dev. #4.3 */ - sky2_write16(hw, STAT_TX_IDX_TH, 0xfff); /* Tx Threshold */ + sky2_write16(hw, STAT_TX_IDX_TH, 10); + sky2_write8(hw, STAT_FIFO_WM, 16); - /* set Status-FIFO watermark */ - sky2_write8(hw, STAT_FIFO_WM, 0x21); /* WA for dev. #4.18 */ - - /* set Status-FIFO ISR watermark */ - sky2_write8(hw, STAT_FIFO_ISR_WM, 0x07); /* WA for dev. #4.18 */ - sky2_write32(hw, STAT_TX_TIMER_INI, sky2_us2clk(hw, 10000)); - } else { - sky2_write16(hw, STAT_TX_IDX_TH, 10); - sky2_write8(hw, STAT_FIFO_WM, 16); - - /* set Status-FIFO ISR watermark */ - if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0) - sky2_write8(hw, STAT_FIFO_ISR_WM, 4); - else - sky2_write8(hw, STAT_FIFO_ISR_WM, 16); + /* set Status-FIFO ISR watermark */ + if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0) + sky2_write8(hw, STAT_FIFO_ISR_WM, 4); + else + sky2_write8(hw, STAT_FIFO_ISR_WM, 16); - sky2_write32(hw, STAT_TX_TIMER_INI, sky2_us2clk(hw, 1000)); - sky2_write32(hw, STAT_ISR_TIMER_INI, sky2_us2clk(hw, 7)); - } + sky2_write32(hw, STAT_TX_TIMER_INI, sky2_us2clk(hw, 1000)); + sky2_write32(hw, STAT_ISR_TIMER_INI, sky2_us2clk(hw, 7)); /* enable status unit */ sky2_write32(hw, STAT_CTRL, SC_STAT_OP_ON); @@ -3091,7 +3062,7 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, INIT_WORK(&sky2->phy_task, sky2_phy_task, sky2); init_MUTEX(&sky2->phy_sema); sky2->tx_pending = TX_DEF_PENDING; - sky2->rx_pending = is_ec_a1(hw) ? 8 : RX_DEF_PENDING; + sky2->rx_pending = RX_DEF_PENDING; sky2->rx_bufsize = sky2_buf_size(ETH_DATA_LEN); hw->dev[port] = dev; diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index dce955c76f3cc18f8006d28022af2a7168f626b0..e2bf1d37ed0e3302f101c3113a01f7a754c1435e 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -1840,7 +1840,6 @@ struct sky2_port { u16 tx_prod; /* next le to use */ u32 tx_addr64; u16 tx_pending; - u16 tx_last_put; u16 tx_last_mss; struct ring_info *rx_ring ____cacheline_aligned_in_smp; @@ -1849,7 +1848,6 @@ struct sky2_port { u16 rx_next; /* next re to check */ u16 rx_put; /* next le index to use */ u16 rx_pending; - u16 rx_last_put; u16 rx_bufsize; #ifdef SKY2_VLAN_TAG_USED u16 rx_tag;