diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/plat-s3c64xx/Makefile index 80255a5e178917e16ac5309547950fa88c37f372..33a73f3e9f01ba6b5278948f7072e887c616c986 100644 --- a/arch/arm/plat-s3c64xx/Makefile +++ b/arch/arm/plat-s3c64xx/Makefile @@ -40,11 +40,16 @@ obj-$(CONFIG_S3C64XX_DMA) += dma.o obj-$(CONFIG_S3C_ADC) += dev-adc.o +# SPI support +obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o + +# Device support +obj-y += dev-audio.o + # Device setup obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o -obj-$(CONFIG_SND_S3C24XX_SOC) += dev-audio.o -obj-$(CONFIG_SPI_S3C64XX) += dev-spi.o + diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 1c2fe91c23e93b4ea49967423eb16ab61d31ce78..72da6461db1281f09f819d4eda0bf31a420ae10a 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -132,6 +132,12 @@ config S3C_DEV_NAND help Compile in platform device definition for NAND controller +config S3C64XX_DEV_SPI + bool + help + Compile in platform device definitions for S3C64XX's type + SPI controllers. + comment "Power management" config SAMSUNG_PM_DEBUG diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c index c7659b7378b1f137d368712f44fae46b14e6d307..81caf2135721947c19d2c69d44f782215dd1b6b1 100644 --- a/arch/arm/plat-samsung/adc.c +++ b/arch/arm/plat-samsung/adc.c @@ -262,6 +262,7 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw) { struct adc_device *adc = pw; struct s3c_adc_client *client = adc->cur; + enum s3c_cpu_type cpu = platform_get_device_id(adc->pdev)->driver_data; unsigned long flags; unsigned data0, data1; @@ -276,9 +277,17 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw) client->nr_samples--; + if (cpu == TYPE_S3C64XX) { + /* S3C64XX ADC resolution is 12-bit */ + data0 &= 0xfff; + data1 &= 0xfff; + } else { + data0 &= 0x3ff; + data1 &= 0x3ff; + } + if (client->convert_cb) - (client->convert_cb)(client, data0 & 0x3ff, data1 & 0x3ff, - &client->nr_samples); + (client->convert_cb)(client, data0, data1, &client->nr_samples); if (client->nr_samples > 0) { /* fire another conversion for this */ @@ -295,7 +304,7 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw) } exit: - if (platform_get_device_id(adc->pdev)->driver_data == TYPE_S3C64XX) { + if (cpu == TYPE_S3C64XX) { /* Clear ADC interrupt */ writel(0, adc->regs + S3C64XX_ADCCLRINT); } @@ -308,6 +317,7 @@ static int s3c_adc_probe(struct platform_device *pdev) struct adc_device *adc; struct resource *regs; int ret; + unsigned tmp; adc = kzalloc(sizeof(struct adc_device), GFP_KERNEL); if (adc == NULL) { @@ -354,8 +364,12 @@ static int s3c_adc_probe(struct platform_device *pdev) clk_enable(adc->clk); - writel(adc->prescale | S3C2410_ADCCON_PRSCEN, - adc->regs + S3C2410_ADCCON); + tmp = adc->prescale | S3C2410_ADCCON_PRSCEN; + if (platform_get_device_id(pdev)->driver_data == TYPE_S3C64XX) { + /* Enable 12-bit ADC resolution */ + tmp |= S3C64XX_ADCCON_RESSEL; + } + writel(tmp, adc->regs + S3C2410_ADCCON); dev_info(dev, "attached adc driver\n"); diff --git a/arch/arm/plat-samsung/dev-usb-hsotg.c b/arch/arm/plat-samsung/dev-usb-hsotg.c index e2f604b51c866c72b28f3d51e3059673c192cf68..33a844ab6917077c6bb6b8728372c00f57d73cbe 100644 --- a/arch/arm/plat-samsung/dev-usb-hsotg.c +++ b/arch/arm/plat-samsung/dev-usb-hsotg.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -33,9 +34,15 @@ static struct resource s3c_usb_hsotg_resources[] = { }, }; +static u64 s3c_hsotg_dmamask = DMA_BIT_MASK(32); + struct platform_device s3c_device_usb_hsotg = { .name = "s3c-hsotg", .id = -1, .num_resources = ARRAY_SIZE(s3c_usb_hsotg_resources), .resource = s3c_usb_hsotg_resources, + .dev = { + .dma_mask = &s3c_hsotg_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, }; diff --git a/arch/arm/plat-samsung/include/plat/regs-adc.h b/arch/arm/plat-samsung/include/plat/regs-adc.h index f43c8dab39e4cd1367b599b65b299f13fefe584f..7554c4fcddb9d80d4297d706147a60a303e36271 100644 --- a/arch/arm/plat-samsung/include/plat/regs-adc.h +++ b/arch/arm/plat-samsung/include/plat/regs-adc.h @@ -25,6 +25,7 @@ /* ADCCON Register Bits */ +#define S3C64XX_ADCCON_RESSEL (1<<16) #define S3C2410_ADCCON_ECFLG (1<<15) #define S3C2410_ADCCON_PRSCEN (1<<14) #define S3C2410_ADCCON_PRSCVL(x) (((x)&0xFF)<<6) diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index ebdd2b984d16e3a72cfa1f250c199c93ba0af542..b2157c36566dcfb0a340a79824b5b4493963a7b9 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -447,7 +447,7 @@ config SERIAL_CLPS711X_CONSOLE config SERIAL_SAMSUNG tristate "Samsung SoC serial support" - depends on ARM && PLAT_S3C + depends on ARM && PLAT_SAMSUNG select SERIAL_CORE help Support for the on-chip UARTs on the Samsung S3C24XX series CPUs, @@ -455,11 +455,18 @@ config SERIAL_SAMSUNG provide all of these ports, depending on how the serial port pins are configured. +config SERIAL_SAMSUNG_UARTS_4 + bool + depends on ARM && PLAT_SAMSUNG + default y if CPU_S3C2443 + help + Internal node for the common case of 4 Samsung compatible UARTs + config SERIAL_SAMSUNG_UARTS int - depends on ARM && PLAT_S3C + depends on ARM && PLAT_SAMSUNG default 2 if ARCH_S3C2400 - default 4 if ARCH_S5P6440 || ARCH_S5PC1XX || ARCH_S5PV210 || ARCH_S3C64XX || CPU_S3C2443 + default 4 if SERIAL_SAMSUNG_UARTS_4 default 3 help Select the number of available UART ports for the Samsung S3C @@ -526,8 +533,9 @@ config SERIAL_S3C24A0 Serial port support for the Samsung S3C24A0 SoC config SERIAL_S3C6400 - tristate "Samsung S3C6400/S3C6410/S5P6440 Serial port support" + tristate "Samsung S3C6400/S3C6410/S5P6440 Seria port support" depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440) + select SERIAL_SAMSUNG_UARTS_4 default y help Serial port support for the Samsung S3C6400, S3C6410 and S5P6440 @@ -536,6 +544,7 @@ config SERIAL_S3C6400 config SERIAL_S5PC100 tristate "Samsung S5PC100 Serial port support" depends on SERIAL_SAMSUNG && CPU_S5PC100 + select SERIAL_SAMSUNG_UARTS_4 default y help Serial port support for the Samsung S5PC100 SoCs @@ -543,6 +552,7 @@ config SERIAL_S5PC100 config SERIAL_S5PV210 tristate "Samsung S5PV210 Serial port support" depends on SERIAL_SAMSUNG && CPU_S5PV210 + select SERIAL_SAMSUNG_UARTS_4 default y help Serial port support for Samsung's S5P Family of SoC's diff --git a/drivers/serial/s3c2412.c b/drivers/serial/s3c2412.c index ce75e28e36ef5a443c3f11bebada3b882a22281f..1700b1a2fb7e03cf6c6a2b9fa600a240f9e632f5 100644 --- a/drivers/serial/s3c2412.c +++ b/drivers/serial/s3c2412.c @@ -102,6 +102,7 @@ static struct s3c24xx_uart_info s3c2412_uart_inf = { .name = "Samsung S3C2412 UART", .type = PORT_S3C2412, .fifosize = 64, + .has_divslot = 1, .rx_fifomask = S3C2440_UFSTAT_RXMASK, .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, .rx_fifofull = S3C2440_UFSTAT_RXFULL,