提交 281afe19 编写于 作者: S Seokmann Ju 提交者: James Bottomley

[SCSI] qla2xxx: fix to honor ignored parameters in sysfs attributes

This is a patch to fix 'segmentation fault' issue which was initiated
by Richard Lary <rlary@us.ibm.com>.  Thanks again Richard.

- on following sysfs attritute function, changes have made so that both
  count and offset input parameters are honored by the functions.
    = qla2x00_sysfs_read_nvram()
    = qla2x00_sysfs_read_vpd()
- made changes so that NVRAM data to be cached to minimize H/W accesses
  during agent querying of the driver's.
Signed-off-by: NSeokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
上级 c835e372
......@@ -91,18 +91,20 @@ qla2x00_sysfs_read_nvram(struct kobject *kobj,
{
struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj,
struct device, kobj)));
unsigned long flags;
int size = ha->nvram_size;
char *nvram_cache = ha->nvram;
if (!capable(CAP_SYS_ADMIN) || off != 0)
if (!capable(CAP_SYS_ADMIN) || off > size || count == 0)
return 0;
if (off + count > size) {
size -= off;
count = size;
}
/* Read NVRAM. */
spin_lock_irqsave(&ha->hardware_lock, flags);
ha->isp_ops->read_nvram(ha, (uint8_t *)buf, ha->nvram_base,
ha->nvram_size);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
/* Read NVRAM data from cache. */
memcpy(buf, &nvram_cache[off], count);
return ha->nvram_size;
return count;
}
static ssize_t
......@@ -144,6 +146,8 @@ qla2x00_sysfs_write_nvram(struct kobject *kobj,
/* Write NVRAM. */
spin_lock_irqsave(&ha->hardware_lock, flags);
ha->isp_ops->write_nvram(ha, (uint8_t *)buf, ha->nvram_base, count);
ha->isp_ops->read_nvram(ha, (uint8_t *)&ha->nvram, ha->nvram_base,
count);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
......@@ -298,18 +302,20 @@ qla2x00_sysfs_read_vpd(struct kobject *kobj,
{
struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj,
struct device, kobj)));
unsigned long flags;
int size = ha->vpd_size;
char *vpd_cache = ha->vpd;
if (!capable(CAP_SYS_ADMIN) || off != 0)
if (!capable(CAP_SYS_ADMIN) || off > size || count == 0)
return 0;
if (off + count > size) {
size -= off;
count = size;
}
/* Read NVRAM. */
spin_lock_irqsave(&ha->hardware_lock, flags);
ha->isp_ops->read_nvram(ha, (uint8_t *)buf, ha->vpd_base,
ha->vpd_size);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
/* Read NVRAM data from cache. */
memcpy(buf, &vpd_cache[off], count);
return ha->vpd_size;
return count;
}
static ssize_t
......@@ -327,6 +333,7 @@ qla2x00_sysfs_write_vpd(struct kobject *kobj,
/* Write NVRAM. */
spin_lock_irqsave(&ha->hardware_lock, flags);
ha->isp_ops->write_nvram(ha, (uint8_t *)buf, ha->vpd_base, count);
ha->isp_ops->read_nvram(ha, (uint8_t *)ha->vpd, ha->vpd_base, count);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
return count;
......
......@@ -2340,10 +2340,14 @@ typedef struct scsi_qla_host {
uint8_t serial2;
/* NVRAM configuration data */
#define MAX_NVRAM_SIZE 4096
#define VPD_OFFSET MAX_NVRAM_SIZE / 2
uint16_t nvram_size;
uint16_t nvram_base;
void *nvram;
uint16_t vpd_size;
uint16_t vpd_base;
void *vpd;
uint16_t loop_reset_delay;
uint8_t retry_count;
......
......@@ -1461,8 +1461,8 @@ qla2x00_nvram_config(scsi_qla_host_t *ha)
uint16_t cnt;
uint8_t *dptr1, *dptr2;
init_cb_t *icb = ha->init_cb;
nvram_t *nv = (nvram_t *)ha->request_ring;
uint8_t *ptr = (uint8_t *)ha->request_ring;
nvram_t *nv = ha->nvram;
uint8_t *ptr = ha->nvram;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
rval = QLA_SUCCESS;
......@@ -1480,8 +1480,7 @@ qla2x00_nvram_config(scsi_qla_host_t *ha)
chksum += *ptr++;
DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", ha->host_no));
DEBUG5(qla2x00_dump_buffer((uint8_t *)ha->request_ring,
ha->nvram_size));
DEBUG5(qla2x00_dump_buffer((uint8_t *)nv, ha->nvram_size));
/* Bad NVRAM data, set defaults parameters. */
if (chksum || nv->id[0] != 'I' || nv->id[1] != 'S' ||
......@@ -3500,7 +3499,7 @@ qla24xx_nvram_config(scsi_qla_host_t *ha)
rval = QLA_SUCCESS;
icb = (struct init_cb_24xx *)ha->init_cb;
nv = (struct nvram_24xx *)ha->request_ring;
nv = ha->nvram;
/* Determine NVRAM starting address. */
ha->nvram_size = sizeof(struct nvram_24xx);
......@@ -3512,7 +3511,12 @@ qla24xx_nvram_config(scsi_qla_host_t *ha)
ha->vpd_base = FA_NVRAM_VPD1_ADDR;
}
/* Get NVRAM data and calculate checksum. */
/* Get VPD data into cache */
ha->vpd = ha->nvram + VPD_OFFSET;
ha->isp_ops->read_nvram(ha, (uint8_t *)ha->vpd,
ha->nvram_base - FA_NVRAM_FUNC0_ADDR, FA_NVRAM_VPD_SIZE * 4);
/* Get NVRAM data into cache and calculate checksum. */
dptr = (uint32_t *)nv;
ha->isp_ops->read_nvram(ha, (uint8_t *)dptr, ha->nvram_base,
ha->nvram_size);
......@@ -3520,8 +3524,7 @@ qla24xx_nvram_config(scsi_qla_host_t *ha)
chksum += le32_to_cpu(*dptr++);
DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", ha->host_no));
DEBUG5(qla2x00_dump_buffer((uint8_t *)ha->request_ring,
ha->nvram_size));
DEBUG5(qla2x00_dump_buffer((uint8_t *)nv, ha->nvram_size));
/* Bad NVRAM data, set defaults parameters. */
if (chksum || nv->id[0] != 'I' || nv->id[1] != 'S' || nv->id[2] != 'P'
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册