提交 2406e5d4 编写于 作者: P Philippe Reynes 提交者: David S. Miller

net: ethernet: broadcom: b44: use new api ethtool_{get|set}_link_ksettings

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 51f141be
......@@ -1832,58 +1832,65 @@ static int b44_nway_reset(struct net_device *dev)
return r;
}
static int b44_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
static int b44_get_link_ksettings(struct net_device *dev,
struct ethtool_link_ksettings *cmd)
{
struct b44 *bp = netdev_priv(dev);
u32 supported, advertising;
if (bp->flags & B44_FLAG_EXTERNAL_PHY) {
BUG_ON(!dev->phydev);
return phy_ethtool_gset(dev->phydev, cmd);
return phy_ethtool_ksettings_get(dev->phydev, cmd);
}
cmd->supported = (SUPPORTED_Autoneg);
cmd->supported |= (SUPPORTED_100baseT_Half |
supported = (SUPPORTED_Autoneg);
supported |= (SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_MII);
cmd->advertising = 0;
advertising = 0;
if (bp->flags & B44_FLAG_ADV_10HALF)
cmd->advertising |= ADVERTISED_10baseT_Half;
advertising |= ADVERTISED_10baseT_Half;
if (bp->flags & B44_FLAG_ADV_10FULL)
cmd->advertising |= ADVERTISED_10baseT_Full;
advertising |= ADVERTISED_10baseT_Full;
if (bp->flags & B44_FLAG_ADV_100HALF)
cmd->advertising |= ADVERTISED_100baseT_Half;
advertising |= ADVERTISED_100baseT_Half;
if (bp->flags & B44_FLAG_ADV_100FULL)
cmd->advertising |= ADVERTISED_100baseT_Full;
cmd->advertising |= ADVERTISED_Pause | ADVERTISED_Asym_Pause;
ethtool_cmd_speed_set(cmd, ((bp->flags & B44_FLAG_100_BASE_T) ?
SPEED_100 : SPEED_10));
cmd->duplex = (bp->flags & B44_FLAG_FULL_DUPLEX) ?
advertising |= ADVERTISED_100baseT_Full;
advertising |= ADVERTISED_Pause | ADVERTISED_Asym_Pause;
cmd->base.speed = (bp->flags & B44_FLAG_100_BASE_T) ?
SPEED_100 : SPEED_10;
cmd->base.duplex = (bp->flags & B44_FLAG_FULL_DUPLEX) ?
DUPLEX_FULL : DUPLEX_HALF;
cmd->port = 0;
cmd->phy_address = bp->phy_addr;
cmd->transceiver = (bp->flags & B44_FLAG_EXTERNAL_PHY) ?
XCVR_EXTERNAL : XCVR_INTERNAL;
cmd->autoneg = (bp->flags & B44_FLAG_FORCE_LINK) ?
cmd->base.port = 0;
cmd->base.phy_address = bp->phy_addr;
cmd->base.autoneg = (bp->flags & B44_FLAG_FORCE_LINK) ?
AUTONEG_DISABLE : AUTONEG_ENABLE;
if (cmd->autoneg == AUTONEG_ENABLE)
cmd->advertising |= ADVERTISED_Autoneg;
if (cmd->base.autoneg == AUTONEG_ENABLE)
advertising |= ADVERTISED_Autoneg;
ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
supported);
ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
advertising);
if (!netif_running(dev)){
ethtool_cmd_speed_set(cmd, 0);
cmd->duplex = 0xff;
cmd->base.speed = 0;
cmd->base.duplex = 0xff;
}
cmd->maxtxpkt = 0;
cmd->maxrxpkt = 0;
return 0;
}
static int b44_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
static int b44_set_link_ksettings(struct net_device *dev,
const struct ethtool_link_ksettings *cmd)
{
struct b44 *bp = netdev_priv(dev);
u32 speed;
int ret;
u32 advertising;
if (bp->flags & B44_FLAG_EXTERNAL_PHY) {
BUG_ON(!dev->phydev);
......@@ -1891,31 +1898,34 @@ static int b44_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
if (netif_running(dev))
b44_setup_phy(bp);
ret = phy_ethtool_sset(dev->phydev, cmd);
ret = phy_ethtool_ksettings_set(dev->phydev, cmd);
spin_unlock_irq(&bp->lock);
return ret;
}
speed = ethtool_cmd_speed(cmd);
speed = cmd->base.speed;
ethtool_convert_link_mode_to_legacy_u32(&advertising,
cmd->link_modes.advertising);
/* We do not support gigabit. */
if (cmd->autoneg == AUTONEG_ENABLE) {
if (cmd->advertising &
if (cmd->base.autoneg == AUTONEG_ENABLE) {
if (advertising &
(ADVERTISED_1000baseT_Half |
ADVERTISED_1000baseT_Full))
return -EINVAL;
} else if ((speed != SPEED_100 &&
speed != SPEED_10) ||
(cmd->duplex != DUPLEX_HALF &&
cmd->duplex != DUPLEX_FULL)) {
(cmd->base.duplex != DUPLEX_HALF &&
cmd->base.duplex != DUPLEX_FULL)) {
return -EINVAL;
}
spin_lock_irq(&bp->lock);
if (cmd->autoneg == AUTONEG_ENABLE) {
if (cmd->base.autoneg == AUTONEG_ENABLE) {
bp->flags &= ~(B44_FLAG_FORCE_LINK |
B44_FLAG_100_BASE_T |
B44_FLAG_FULL_DUPLEX |
......@@ -1923,19 +1933,19 @@ static int b44_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
B44_FLAG_ADV_10FULL |
B44_FLAG_ADV_100HALF |
B44_FLAG_ADV_100FULL);
if (cmd->advertising == 0) {
if (advertising == 0) {
bp->flags |= (B44_FLAG_ADV_10HALF |
B44_FLAG_ADV_10FULL |
B44_FLAG_ADV_100HALF |
B44_FLAG_ADV_100FULL);
} else {
if (cmd->advertising & ADVERTISED_10baseT_Half)
if (advertising & ADVERTISED_10baseT_Half)
bp->flags |= B44_FLAG_ADV_10HALF;
if (cmd->advertising & ADVERTISED_10baseT_Full)
if (advertising & ADVERTISED_10baseT_Full)
bp->flags |= B44_FLAG_ADV_10FULL;
if (cmd->advertising & ADVERTISED_100baseT_Half)
if (advertising & ADVERTISED_100baseT_Half)
bp->flags |= B44_FLAG_ADV_100HALF;
if (cmd->advertising & ADVERTISED_100baseT_Full)
if (advertising & ADVERTISED_100baseT_Full)
bp->flags |= B44_FLAG_ADV_100FULL;
}
} else {
......@@ -1943,7 +1953,7 @@ static int b44_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
bp->flags &= ~(B44_FLAG_100_BASE_T | B44_FLAG_FULL_DUPLEX);
if (speed == SPEED_100)
bp->flags |= B44_FLAG_100_BASE_T;
if (cmd->duplex == DUPLEX_FULL)
if (cmd->base.duplex == DUPLEX_FULL)
bp->flags |= B44_FLAG_FULL_DUPLEX;
}
......@@ -2110,8 +2120,6 @@ static int b44_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
static const struct ethtool_ops b44_ethtool_ops = {
.get_drvinfo = b44_get_drvinfo,
.get_settings = b44_get_settings,
.set_settings = b44_set_settings,
.nway_reset = b44_nway_reset,
.get_link = ethtool_op_get_link,
.get_wol = b44_get_wol,
......@@ -2125,6 +2133,8 @@ static const struct ethtool_ops b44_ethtool_ops = {
.get_strings = b44_get_strings,
.get_sset_count = b44_get_sset_count,
.get_ethtool_stats = b44_get_ethtool_stats,
.get_link_ksettings = b44_get_link_ksettings,
.set_link_ksettings = b44_set_link_ksettings,
};
static int b44_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册