[POWERPC] cell: update Cell BE register definitions

There are a few definitions that are required by subsequent patches,
so add them here.

The original patch is from David Erb, but is significantly cleaned
up by Kevon Corry.

Cc: Kevin Corry <kevcorry@us.ibm.com>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

arch/powerpc/platforms/cell/cbe_regs.c

@@ -8,6 +8,7 @@
 
 #include <linux/percpu.h>
 #include <linux/types.h>
+#include <linux/module.h>
 
 #include <asm/io.h>
 #include <asm/pgtable.h>
@@ -16,8 +17,6 @@
 
 #include "cbe_regs.h"
 
-#define MAX_CBE		2
-
 /*
  * Current implementation uses "cpu" nodes. We build our own mapping
  * array of cpu numbers to cpu nodes locally for now to allow interrupt
@@ -30,6 +29,7 @@ static struct cbe_regs_map
 	struct device_node *cpu_node;
 	struct cbe_pmd_regs __iomem *pmd_regs;
 	struct cbe_iic_regs __iomem *iic_regs;
+	struct cbe_mic_tm_regs __iomem *mic_tm_regs;
 } cbe_regs_maps[MAX_CBE];
 static int cbe_regs_map_count;
 
@@ -42,6 +42,19 @@ static struct cbe_thread_map
 static struct cbe_regs_map *cbe_find_map(struct device_node *np)
 {
 	int i;
+	struct device_node *tmp_np;
+
+	if (strcasecmp(np->type, "spe") == 0) {
+		if (np->data == NULL) {
+			/* walk up path until cpu node was found */
+			tmp_np = np->parent;
+			while (tmp_np != NULL && strcasecmp(tmp_np->type, "cpu") != 0)
+				tmp_np = tmp_np->parent;
+
+			np->data = cbe_find_map(tmp_np);
+		}
+		return np->data;
+	}
 
 	for (i = 0; i < cbe_regs_map_count; i++)
 		if (cbe_regs_maps[i].cpu_node == np)
@@ -56,6 +69,7 @@ struct cbe_pmd_regs __iomem *cbe_get_pmd_regs(struct device_node *np)
 		return NULL;
 	return map->pmd_regs;
 }
+EXPORT_SYMBOL_GPL(cbe_get_pmd_regs);
 
 struct cbe_pmd_regs __iomem *cbe_get_cpu_pmd_regs(int cpu)
 {
@@ -64,7 +78,7 @@ struct cbe_pmd_regs __iomem *cbe_get_cpu_pmd_regs(int cpu)
 		return NULL;
 	return map->pmd_regs;
 }
-
+EXPORT_SYMBOL_GPL(cbe_get_cpu_pmd_regs);
 
 struct cbe_iic_regs __iomem *cbe_get_iic_regs(struct device_node *np)
 {
@@ -73,6 +87,7 @@ struct cbe_iic_regs __iomem *cbe_get_iic_regs(struct device_node *np)
 		return NULL;
 	return map->iic_regs;
 }
+
 struct cbe_iic_regs __iomem *cbe_get_cpu_iic_regs(int cpu)
 {
 	struct cbe_regs_map *map = cbe_thread_map[cpu].regs;
@@ -81,6 +96,24 @@ struct cbe_iic_regs __iomem *cbe_get_cpu_iic_regs(int cpu)
 	return map->iic_regs;
 }
 
+struct cbe_mic_tm_regs __iomem *cbe_get_mic_tm_regs(struct device_node *np)
+{
+	struct cbe_regs_map *map = cbe_find_map(np);
+	if (map == NULL)
+		return NULL;
+	return map->mic_tm_regs;
+}
+
+struct cbe_mic_tm_regs __iomem *cbe_get_cpu_mic_tm_regs(int cpu)
+{
+	struct cbe_regs_map *map = cbe_thread_map[cpu].regs;
+	if (map == NULL)
+		return NULL;
+	return map->mic_tm_regs;
+}
+EXPORT_SYMBOL_GPL(cbe_get_cpu_mic_tm_regs);
+
+
 void __init cbe_regs_init(void)
 {
 	int i;
@@ -119,6 +152,11 @@ void __init cbe_regs_init(void)
 		prop = get_property(cpu, "iic", NULL);
 		if (prop != NULL)
 			map->iic_regs = ioremap(prop->address, prop->len);
+
+		prop = (struct address_prop *)get_property(cpu, "mic-tm",
+							   NULL);
+		if (prop != NULL)
+			map->mic_tm_regs = ioremap(prop->address, prop->len);
 	}
 }
 

arch/powerpc/platforms/cell/cbe_regs.h

@@ -4,6 +4,11 @@
  * This file is intended to hold the various register definitions for CBE
  * on-chip system devices (memory controller, IO controller, etc...)
  *
+ * (C) Copyright IBM Corporation 2001,2006
+ *
+ * Authors: Maximino Aguilar (maguilar@us.ibm.com)
+ *          David J. Erb (djerb@us.ibm.com)
+ *
  * (c) 2006 Benjamin Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
  */
 
@@ -22,6 +27,7 @@
 #define HID0_CBE_THERM_INT_EN	0x0000000400000000ul
 #define HID0_CBE_SYSERR_INT_EN	0x0000000200000000ul
 
+#define MAX_CBE		2
 
 /*
  *
@@ -29,31 +35,72 @@
  *
  */
 
+union spe_reg {
+	u64 val;
+	u8 spe[8];
+};
+
+union ppe_spe_reg {
+	u64 val;
+	struct {
+		u32 ppe;
+		u32 spe;
+	};
+};
+
+
 struct cbe_pmd_regs {
-	u8 pad_0x0000_0x0800[0x0800 - 0x0000];			/* 0x0000 */
+	/* Debug Bus Control */
+	u64	pad_0x0000;					/* 0x0000 */
+
+	u64	group_control;					/* 0x0008 */
+
+	u8	pad_0x0010_0x00a8 [0x00a8 - 0x0010];		/* 0x0010 */
+
+	u64	debug_bus_control;				/* 0x00a8 */
+
+	u8	pad_0x00b0_0x0100 [0x0100 - 0x00b0];		/* 0x00b0 */
+
+	u64	trace_aux_data;					/* 0x0100 */
+	u64	trace_buffer_0_63;				/* 0x0108 */
+	u64	trace_buffer_64_127;				/* 0x0110 */
+	u64	trace_address;					/* 0x0118 */
+	u64	ext_tr_timer;					/* 0x0120 */
+
+	u8	pad_0x0128_0x0400 [0x0400 - 0x0128];		/* 0x0128 */
+
+	/* Performance Monitor */
+	u64	pm_status;					/* 0x0400 */
+	u64	pm_control;					/* 0x0408 */
+	u64	pm_interval;					/* 0x0410 */
+	u64	pm_ctr[4];					/* 0x0418 */
+	u64	pm_start_stop;					/* 0x0438 */
+	u64	pm07_control[8];				/* 0x0440 */
+
+	u8	pad_0x0480_0x0800 [0x0800 - 0x0480];		/* 0x0480 */
 
 	/* Thermal Sensor Registers */
-	u64  ts_ctsr1;						/* 0x0800 */
+	union	spe_reg	ts_ctsr1;				/* 0x0800 */
 	u64	ts_ctsr2;					/* 0x0808 */
-	u64  ts_mtsr1;						/* 0x0810 */
+	union	spe_reg	ts_mtsr1;				/* 0x0810 */
 	u64	ts_mtsr2;					/* 0x0818 */
-	u64  ts_itr1;						/* 0x0820 */
+	union	spe_reg	ts_itr1;				/* 0x0820 */
 	u64	ts_itr2;					/* 0x0828 */
 	u64	ts_gitr;					/* 0x0830 */
 	u64	ts_isr;						/* 0x0838 */
 	u64	ts_imr;						/* 0x0840 */
-	u64  tm_cr1;						/* 0x0848 */
+	union	spe_reg	tm_cr1;					/* 0x0848 */
 	u64	tm_cr2;						/* 0x0850 */
 	u64	tm_simr;					/* 0x0858 */
-	u64  tm_tpr;						/* 0x0860 */
-	u64  tm_str1;						/* 0x0868 */
+	union	ppe_spe_reg tm_tpr;				/* 0x0860 */
+	union	spe_reg	tm_str1;				/* 0x0868 */
 	u64	tm_str2;					/* 0x0870 */
-	u64  tm_tsr;						/* 0x0878 */
+	union	ppe_spe_reg tm_tsr;				/* 0x0878 */
 
 	/* Power Management */
-	u64  pm_control;					/* 0x0880 */
+	u64	pmcr;						/* 0x0880 */
 #define CBE_PMD_PAUSE_ZERO_CONTROL	0x10000
-	u64  pm_status;						/* 0x0888 */
+	u64	pmsr;						/* 0x0888 */
 
 	/* Time Base Register */
 	u64	tbr;						/* 0x0890 */
@@ -62,10 +109,10 @@ struct cbe_pmd_regs {
 
 	/* Fault Isolation Registers */
 	u64	checkstop_fir;					/* 0x0c00 */
-	u64  recoverable_fir;
-	u64  spec_att_mchk_fir;
-	u64  fir_mode_reg;
-	u64  fir_enable_mask;
+	u64	recoverable_fir;				/* 0x0c08 */
+	u64	spec_att_mchk_fir;				/* 0x0c10 */
+	u64	fir_mode_reg;					/* 0x0c18 */
+	u64	fir_enable_mask;				/* 0x0c20 */
 
 	u8	pad_0x0c28_0x1000 [0x1000 - 0x0c28];		/* 0x0c28 */
 };
@@ -102,18 +149,20 @@ struct cbe_iic_regs {
 
 	/* IIC interrupt registers */
 	struct	cbe_iic_thread_regs thread[2];			/* 0x0400 */
+
 	u64	iic_ir;						/* 0x0440 */
 	u64	iic_is;						/* 0x0448 */
+#define CBE_IIC_IS_PMI		0x2
 
 	u8	pad_0x0450_0x0500[0x0500 - 0x0450];		/* 0x0450 */
 
 	/* IOC FIR */
 	u64	ioc_fir_reset;					/* 0x0500 */
-	u64	ioc_fir_set;
-	u64	ioc_checkstop_enable;
-	u64	ioc_fir_error_mask;
-	u64	ioc_syserr_enable;
-	u64	ioc_fir;
+	u64	ioc_fir_set;					/* 0x0508 */
+	u64	ioc_checkstop_enable;				/* 0x0510 */
+	u64	ioc_fir_error_mask;				/* 0x0518 */
+	u64	ioc_syserr_enable;				/* 0x0520 */
+	u64	ioc_fir;					/* 0x0528 */
 
 	u8	pad_0x0530_0x1000[0x1000 - 0x0530];		/* 0x0530 */
 };
@@ -122,6 +171,48 @@ extern struct cbe_iic_regs __iomem *cbe_get_iic_regs(struct device_node *np);
 extern struct cbe_iic_regs __iomem *cbe_get_cpu_iic_regs(int cpu);
 
 
+struct cbe_mic_tm_regs {
+	u8	pad_0x0000_0x0040[0x0040 - 0x0000];		/* 0x0000 */
+
+	u64	mic_ctl_cnfg2;					/* 0x0040 */
+#define CBE_MIC_ENABLE_AUX_TRC		0x8000000000000000LL
+#define CBE_MIC_DISABLE_PWR_SAV_2	0x0200000000000000LL
+#define CBE_MIC_DISABLE_AUX_TRC_WRAP	0x0100000000000000LL
+#define CBE_MIC_ENABLE_AUX_TRC_INT	0x0080000000000000LL
+
+	u64	pad_0x0048;					/* 0x0048 */
+
+	u64	mic_aux_trc_base;				/* 0x0050 */
+	u64	mic_aux_trc_max_addr;				/* 0x0058 */
+	u64	mic_aux_trc_cur_addr;				/* 0x0060 */
+	u64	mic_aux_trc_grf_addr;				/* 0x0068 */
+	u64	mic_aux_trc_grf_data;				/* 0x0070 */
+
+	u64	pad_0x0078;					/* 0x0078 */
+
+	u64	mic_ctl_cnfg_0;					/* 0x0080 */
+#define CBE_MIC_DISABLE_PWR_SAV_0	0x8000000000000000LL
+
+	u64	pad_0x0088;					/* 0x0088 */
+
+	u64	slow_fast_timer_0;				/* 0x0090 */
+	u64	slow_next_timer_0;				/* 0x0098 */
+
+	u8	pad_0x00a0_0x01c0[0x01c0 - 0x0a0];		/* 0x00a0 */
+
+	u64	mic_ctl_cnfg_1;					/* 0x01c0 */
+#define CBE_MIC_DISABLE_PWR_SAV_1	0x8000000000000000LL
+	u64	pad_0x01c8;					/* 0x01c8 */
+
+	u64	slow_fast_timer_1;				/* 0x01d0 */
+	u64	slow_next_timer_1;				/* 0x01d8 */
+
+	u8	pad_0x01e0_0x1000[0x1000 - 0x01e0];		/* 0x01e0 */
+};
+
+extern struct cbe_mic_tm_regs __iomem *cbe_get_mic_tm_regs(struct device_node *np);
+extern struct cbe_mic_tm_regs __iomem *cbe_get_cpu_mic_tm_regs(int cpu);
+
 /* Init this module early */
 extern void cbe_regs_init(void);
 

arch/powerpc/platforms/cell/pervasive.c

@@ -54,9 +54,9 @@ static void __init cbe_enable_pause_zero(void)
 	pr_debug("Power Management: CPU %d\n", smp_processor_id());
 
 	 /* Enable Pause(0) control bit */
-	temp_register = in_be64(&pregs->pm_control);
+	temp_register = in_be64(&pregs->pmcr);
 
-	out_be64(&pregs->pm_control,
+	out_be64(&pregs->pmcr,
 		 temp_register | CBE_PMD_PAUSE_ZERO_CONTROL);
 
 	/* Enable DEC and EE interrupt request */
@@ -87,7 +87,7 @@ static void cbe_idle(void)
 	unsigned long ctrl;
 
 	/* Why do we do that on every idle ? Couldn't that be done once for
-	 * all or do we lose the state some way ? Also, the pm_control
+	 * all or do we lose the state some way ? Also, the pmcr
 	 * register setting, that can't be set once at boot ? We really want
 	 * to move that away in order to implement a simple powersave
 	 */