提交 21e7daef 编写于 作者: S Suman Anna 提交者: Sekhar Nori

ARM: dts: da850: Add DSP node

The TI Davinci DA8xx family of SoCs have a single DSP subsystem
that is comprised of TI's standard TMS320C674x megamodule and
several blocks of internal memory (L1P, L1D and L2 RAMs). Add
the DT node for this DSP processor sub-system. The processor
does not have an MMU, and uses a chip-level signalling register
and shared memory for inter-processor communication with the
ARM core.

The node has been added in disabled state, and can be enabled
in the respective board dts file with an associated reserved
memory block.
Signed-off-by: NSuman Anna <s-anna@ti.com>
Signed-off-by: NSekhar Nori <nsekhar@ti.com>
上级 ce21574a
......@@ -23,6 +23,18 @@
reg = <0xfffee000 0x2000>;
};
};
dsp: dsp@11800000 {
compatible = "ti,da850-dsp";
reg = <0x11800000 0x40000>,
<0x11e00000 0x8000>,
<0x11f00000 0x8000>,
<0x01c14044 0x4>,
<0x01c14174 0x8>;
reg-names = "l2sram", "l1pram", "l1dram", "host1cfg", "chipsig";
interrupt-parent = <&intc>;
interrupts = <28>;
status = "disabled";
};
soc@1c00000 {
compatible = "simple-bus";
model = "da850";
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册