diff --git a/MAINTAINERS b/MAINTAINERS index 6b7625ff9875370b0df857562379a1f2d20b3f13..3cf8b0a220198ba2e8ef1af8ce9458466c6b3b34 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7979,6 +7979,12 @@ S: Maintained F: drivers/net/ethernet/marvell/mv643xx_eth.* F: include/linux/mv643xx.h +MARVELL MV88X3310 PHY DRIVER +M: Russell King +L: netdev@vger.kernel.org +S: Maintained +F: drivers/net/phy/marvell10g.c + MARVELL MVNETA ETHERNET DRIVER M: Thomas Petazzoni L: netdev@vger.kernel.org diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 0c516d3229d0b8aa98064a8796cbeea6797f0752..65af31f24f017a0f3b485b8e87a27f27da01aba5 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -292,6 +292,11 @@ config MARVELL_PHY ---help--- Currently has a driver for the 88E1011S +config MARVELL_10G_PHY + tristate "Marvell Alaska 10Gbit PHYs" + ---help--- + Support for the Marvell Alaska MV88X3310 and compatible PHYs. + config MESON_GXL_PHY tristate "Amlogic Meson GXL Internal PHY" depends on ARCH_MESON || COMPILE_TEST diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index ae58f507aba9072b213e5f65de36b4f5e1ea3369..8e9b9f34938445f798ad8248eec6eaee3728dc8b 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -57,6 +57,7 @@ obj-$(CONFIG_INTEL_XWAY_PHY) += intel-xway.o obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o obj-$(CONFIG_LXT_PHY) += lxt.o obj-$(CONFIG_MARVELL_PHY) += marvell.o +obj-$(CONFIG_MARVELL_10G_PHY) += marvell10g.o obj-$(CONFIG_MESON_GXL_PHY) += meson-gxl.o obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o obj-$(CONFIG_MICREL_PHY) += micrel.o diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c new file mode 100644 index 0000000000000000000000000000000000000000..aebc08beceba33aef3bd1440eeb0f589e0150cff --- /dev/null +++ b/drivers/net/phy/marvell10g.c @@ -0,0 +1,368 @@ +/* + * Marvell 10G 88x3310 PHY driver + * + * Based upon the ID registers, this PHY appears to be a mixture of IPs + * from two different companies. + * + * There appears to be several different data paths through the PHY which + * are automatically managed by the PHY. The following has been determined + * via observation and experimentation: + * + * SGMII PHYXS -- BASE-T PCS -- 10G PMA -- AN -- Copper (for <= 1G) + * 10GBASE-KR PHYXS -- BASE-T PCS -- 10G PMA -- AN -- Copper (for 10G) + * 10GBASE-KR PHYXS -- BASE-R PCS -- Fiber + * + * If both the fiber and copper ports are connected, the first to gain + * link takes priority and the other port is completely locked out. + */ +#include + +enum { + MV_PCS_BASE_T = 0x0000, + MV_PCS_BASE_R = 0x1000, + MV_PCS_1000BASEX = 0x2000, + + /* These registers appear at 0x800X and 0xa00X - the 0xa00X control + * registers appear to set themselves to the 0x800X when AN is + * restarted, but status registers appear readable from either. + */ + MV_AN_CTRL1000 = 0x8000, /* 1000base-T control register */ + MV_AN_STAT1000 = 0x8001, /* 1000base-T status register */ + + /* This register appears to reflect the copper status */ + MV_AN_RESULT = 0xa016, + MV_AN_RESULT_SPD_10 = BIT(12), + MV_AN_RESULT_SPD_100 = BIT(13), + MV_AN_RESULT_SPD_1000 = BIT(14), + MV_AN_RESULT_SPD_10000 = BIT(15), +}; + +static int mv3310_modify(struct phy_device *phydev, int devad, u16 reg, + u16 mask, u16 bits) +{ + int old, val, ret; + + old = phy_read_mmd(phydev, devad, reg); + if (old < 0) + return old; + + val = (old & ~mask) | (bits & mask); + if (val == old) + return 0; + + ret = phy_write_mmd(phydev, devad, reg, val); + + return ret < 0 ? ret : 1; +} + +static int mv3310_probe(struct phy_device *phydev) +{ + u32 mmd_mask = MDIO_DEVS_PMAPMD | MDIO_DEVS_AN; + + if (!phydev->is_c45 || + (phydev->c45_ids.devices_in_package & mmd_mask) != mmd_mask) + return -ENODEV; + + return 0; +} + +/* + * Resetting the MV88X3310 causes it to become non-responsive. Avoid + * setting the reset bit(s). + */ +static int mv3310_soft_reset(struct phy_device *phydev) +{ + return 0; +} + +static int mv3310_config_init(struct phy_device *phydev) +{ + __ETHTOOL_DECLARE_LINK_MODE_MASK(supported) = { 0, }; + u32 mask; + int val; + + /* Check that the PHY interface type is compatible */ + if (phydev->interface != PHY_INTERFACE_MODE_SGMII && + phydev->interface != PHY_INTERFACE_MODE_XGMII && + phydev->interface != PHY_INTERFACE_MODE_XAUI && + phydev->interface != PHY_INTERFACE_MODE_RXAUI && + phydev->interface != PHY_INTERFACE_MODE_10GKR) + return -ENODEV; + + __set_bit(ETHTOOL_LINK_MODE_Pause_BIT, supported); + __set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, supported); + + if (phydev->c45_ids.devices_in_package & MDIO_DEVS_AN) { + val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1); + if (val < 0) + return val; + + if (val & MDIO_AN_STAT1_ABLE) + __set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, supported); + } + + val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_STAT2); + if (val < 0) + return val; + + /* Ethtool does not support the WAN mode bits */ + if (val & (MDIO_PMA_STAT2_10GBSR | MDIO_PMA_STAT2_10GBLR | + MDIO_PMA_STAT2_10GBER | MDIO_PMA_STAT2_10GBLX4 | + MDIO_PMA_STAT2_10GBSW | MDIO_PMA_STAT2_10GBLW | + MDIO_PMA_STAT2_10GBEW)) + __set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, supported); + if (val & MDIO_PMA_STAT2_10GBSR) + __set_bit(ETHTOOL_LINK_MODE_10000baseSR_Full_BIT, supported); + if (val & MDIO_PMA_STAT2_10GBLR) + __set_bit(ETHTOOL_LINK_MODE_10000baseLR_Full_BIT, supported); + if (val & MDIO_PMA_STAT2_10GBER) + __set_bit(ETHTOOL_LINK_MODE_10000baseER_Full_BIT, supported); + + if (val & MDIO_PMA_STAT2_EXTABLE) { + val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_EXTABLE); + if (val < 0) + return val; + + if (val & (MDIO_PMA_EXTABLE_10GBT | MDIO_PMA_EXTABLE_1000BT | + MDIO_PMA_EXTABLE_100BTX | MDIO_PMA_EXTABLE_10BT)) + __set_bit(ETHTOOL_LINK_MODE_TP_BIT, supported); + if (val & MDIO_PMA_EXTABLE_10GBLRM) + __set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, supported); + if (val & (MDIO_PMA_EXTABLE_10GBKX4 | MDIO_PMA_EXTABLE_10GBKR | + MDIO_PMA_EXTABLE_1000BKX)) + __set_bit(ETHTOOL_LINK_MODE_Backplane_BIT, supported); + if (val & MDIO_PMA_EXTABLE_10GBLRM) + __set_bit(ETHTOOL_LINK_MODE_10000baseLRM_Full_BIT, + supported); + if (val & MDIO_PMA_EXTABLE_10GBT) + __set_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT, + supported); + if (val & MDIO_PMA_EXTABLE_10GBKX4) + __set_bit(ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT, + supported); + if (val & MDIO_PMA_EXTABLE_10GBKR) + __set_bit(ETHTOOL_LINK_MODE_10000baseKR_Full_BIT, + supported); + if (val & MDIO_PMA_EXTABLE_1000BT) + __set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, + supported); + if (val & MDIO_PMA_EXTABLE_1000BKX) + __set_bit(ETHTOOL_LINK_MODE_1000baseKX_Full_BIT, + supported); + if (val & MDIO_PMA_EXTABLE_100BTX) + __set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, + supported); + if (val & MDIO_PMA_EXTABLE_10BT) + __set_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, + supported); + } + + if (!ethtool_convert_link_mode_to_legacy_u32(&mask, supported)) + dev_warn(&phydev->mdio.dev, + "PHY supports (%*pb) more modes than phylib supports, some modes not supported.\n", + __ETHTOOL_LINK_MODE_MASK_NBITS, supported); + + phydev->supported &= mask; + phydev->advertising &= phydev->supported; + + return 0; +} + +static int mv3310_config_aneg(struct phy_device *phydev) +{ + bool changed = false; + u32 advertising; + int ret; + + if (phydev->autoneg == AUTONEG_DISABLE) { + ret = genphy_c45_pma_setup_forced(phydev); + if (ret < 0) + return ret; + + return genphy_c45_an_disable_aneg(phydev); + } + + phydev->advertising &= phydev->supported; + advertising = phydev->advertising; + + ret = mv3310_modify(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE, + ADVERTISE_ALL | ADVERTISE_100BASE4 | + ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM, + ethtool_adv_to_mii_adv_t(advertising)); + if (ret < 0) + return ret; + if (ret > 0) + changed = true; + + ret = mv3310_modify(phydev, MDIO_MMD_AN, MV_AN_CTRL1000, + ADVERTISE_1000FULL | ADVERTISE_1000HALF, + ethtool_adv_to_mii_ctrl1000_t(advertising)); + if (ret < 0) + return ret; + if (ret > 0) + changed = true; + + /* 10G control register */ + ret = mv3310_modify(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL, + MDIO_AN_10GBT_CTRL_ADV10G, + advertising & ADVERTISED_10000baseT_Full ? + MDIO_AN_10GBT_CTRL_ADV10G : 0); + if (ret < 0) + return ret; + if (ret > 0) + changed = true; + + if (changed) + ret = genphy_c45_restart_aneg(phydev); + + return ret; +} + +static int mv3310_aneg_done(struct phy_device *phydev) +{ + int val; + + val = phy_read_mmd(phydev, MDIO_MMD_PCS, MV_PCS_BASE_R + MDIO_STAT1); + if (val < 0) + return val; + + if (val & MDIO_STAT1_LSTATUS) + return 1; + + return genphy_c45_aneg_done(phydev); +} + +/* 10GBASE-ER,LR,LRM,SR do not support autonegotiation. */ +static int mv3310_read_10gbr_status(struct phy_device *phydev) +{ + phydev->link = 1; + phydev->speed = SPEED_10000; + phydev->duplex = DUPLEX_FULL; + + if (phydev->interface == PHY_INTERFACE_MODE_SGMII) + phydev->interface = PHY_INTERFACE_MODE_10GKR; + + return 0; +} + +static int mv3310_read_status(struct phy_device *phydev) +{ + u32 mmd_mask = phydev->c45_ids.devices_in_package; + int val; + + /* The vendor devads do not report link status. Avoid the PHYXS + * instance as there are three, and its status depends on the MAC + * being appropriately configured for the negotiated speed. + */ + mmd_mask &= ~(BIT(MDIO_MMD_VEND1) | BIT(MDIO_MMD_VEND2) | + BIT(MDIO_MMD_PHYXS)); + + phydev->speed = SPEED_UNKNOWN; + phydev->duplex = DUPLEX_UNKNOWN; + phydev->lp_advertising = 0; + phydev->link = 0; + phydev->pause = 0; + phydev->asym_pause = 0; + + val = phy_read_mmd(phydev, MDIO_MMD_PCS, MV_PCS_BASE_R + MDIO_STAT1); + if (val < 0) + return val; + + if (val & MDIO_STAT1_LSTATUS) + return mv3310_read_10gbr_status(phydev); + + val = genphy_c45_read_link(phydev, mmd_mask); + if (val < 0) + return val; + + phydev->link = val > 0 ? 1 : 0; + + val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1); + if (val < 0) + return val; + + if (val & MDIO_AN_STAT1_COMPLETE) { + val = genphy_c45_read_lpa(phydev); + if (val < 0) + return val; + + /* Read the link partner's 1G advertisment */ + val = phy_read_mmd(phydev, MDIO_MMD_AN, MV_AN_STAT1000); + if (val < 0) + return val; + + phydev->lp_advertising |= mii_stat1000_to_ethtool_lpa_t(val); + + if (phydev->autoneg == AUTONEG_ENABLE) { + val = phy_read_mmd(phydev, MDIO_MMD_AN, MV_AN_RESULT); + if (val < 0) + return val; + + if (val & MV_AN_RESULT_SPD_10000) + phydev->speed = SPEED_10000; + else if (val & MV_AN_RESULT_SPD_1000) + phydev->speed = SPEED_1000; + else if (val & MV_AN_RESULT_SPD_100) + phydev->speed = SPEED_100; + else if (val & MV_AN_RESULT_SPD_10) + phydev->speed = SPEED_10; + + phydev->duplex = DUPLEX_FULL; + } + } + + if (phydev->autoneg != AUTONEG_ENABLE) { + val = genphy_c45_read_pma(phydev); + if (val < 0) + return val; + } + + if ((phydev->interface == PHY_INTERFACE_MODE_SGMII || + phydev->interface == PHY_INTERFACE_MODE_10GKR) && phydev->link) { + /* The PHY automatically switches its serdes interface (and + * active PHYXS instance) between Cisco SGMII and 10GBase-KR + * modes according to the speed. Florian suggests setting + * phydev->interface to communicate this to the MAC. Only do + * this if we are already in either SGMII or 10GBase-KR mode. + */ + if (phydev->speed == SPEED_10000) + phydev->interface = PHY_INTERFACE_MODE_10GKR; + else if (phydev->speed >= SPEED_10 && + phydev->speed < SPEED_10000) + phydev->interface = PHY_INTERFACE_MODE_SGMII; + } + + return 0; +} + +static struct phy_driver mv3310_drivers[] = { + { + .phy_id = 0x002b09aa, + .phy_id_mask = 0xffffffff, + .name = "mv88x3310", + .features = SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full | + SUPPORTED_Autoneg | + SUPPORTED_TP | + SUPPORTED_FIBRE | + SUPPORTED_10000baseT_Full | + SUPPORTED_Backplane, + .probe = mv3310_probe, + .soft_reset = mv3310_soft_reset, + .config_init = mv3310_config_init, + .config_aneg = mv3310_config_aneg, + .aneg_done = mv3310_aneg_done, + .read_status = mv3310_read_status, + }, +}; + +module_phy_driver(mv3310_drivers); + +static struct mdio_device_id __maybe_unused mv3310_tbl[] = { + { 0x002b09aa, 0xffffffff }, + { }, +}; +MODULE_DEVICE_TABLE(mdio, mv3310_tbl); +MODULE_DESCRIPTION("Marvell Alaska X 10Gigabit Ethernet PHY driver (MV88X3310)"); +MODULE_LICENSE("GPL");