提交 207b58fb 编写于 作者: M Mike McCormack 提交者: Greg Kroah-Hartman

Staging: rtl8192e: Remove backslashes at end of lines

Signed-off-by: NMike McCormack <mikem@ring3k.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
上级 285f660c
......@@ -24,10 +24,10 @@ static void eprom_cs(struct net_device *dev, short bit)
{
if (bit)
write_nic_byte(dev, EPROM_CMD,
(1<<EPROM_CS_SHIFT) | \
(1<<EPROM_CS_SHIFT) |
read_nic_byte(dev, EPROM_CMD)); //enable EPROM
else
write_nic_byte(dev, EPROM_CMD, read_nic_byte(dev, EPROM_CMD)\
write_nic_byte(dev, EPROM_CMD, read_nic_byte(dev, EPROM_CMD)
&~(1<<EPROM_CS_SHIFT)); //disable EPROM
force_pci_posting(dev);
......@@ -51,10 +51,10 @@ static void eprom_ck_cycle(struct net_device *dev)
static void eprom_w(struct net_device *dev, short bit)
{
if (bit)
write_nic_byte(dev, EPROM_CMD, (1<<EPROM_W_SHIFT) | \
write_nic_byte(dev, EPROM_CMD, (1<<EPROM_W_SHIFT) |
read_nic_byte(dev, EPROM_CMD));
else
write_nic_byte(dev, EPROM_CMD, read_nic_byte(dev, EPROM_CMD)\
write_nic_byte(dev, EPROM_CMD, read_nic_byte(dev, EPROM_CMD)
&~(1<<EPROM_W_SHIFT));
force_pci_posting(dev);
......
......@@ -71,7 +71,7 @@
#endif
//set here to open your trace code. //WB
u32 rt_global_debug_component = \
u32 rt_global_debug_component =
// COMP_INIT |
// COMP_EPROM |
// COMP_PHY |
......@@ -363,8 +363,8 @@ u8 rtl8192e_ap_sec_type(struct ieee80211_device *ieee)
crypt = ieee->crypt[ieee->tx_keyidx];
encrypt = (ieee->current_network.capability & WLAN_CAPABILITY_PRIVACY) ||\
(ieee->host_encrypt && crypt && crypt->ops && \
encrypt = (ieee->current_network.capability & WLAN_CAPABILITY_PRIVACY) ||
(ieee->host_encrypt && crypt && crypt->ops &&
(0 == strcmp(crypt->ops->name,"WEP")));
/* simply judge */
......@@ -1708,7 +1708,7 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff* skb)
pdesc = &ring->desc[idx];
if((pdesc->OWN == 1) && (tcb_desc->queue_index != BEACON_QUEUE)) {
RT_TRACE(COMP_ERR,"No more TX desc@%d, ring->idx = %d,idx = %d,%x", \
RT_TRACE(COMP_ERR,"No more TX desc@%d, ring->idx = %d,idx = %d,%x",
tcb_desc->queue_index,ring->idx, idx,skb->len);
spin_unlock_irqrestore(&priv->irq_th_lock,flags);
return skb->len;
......@@ -2044,7 +2044,7 @@ static int rtl8192_qos_handle_probe_response(struct r8192_priv *priv,
"qos_activate\n");
}
} else {
memcpy(&priv->ieee80211->current_network.qos_data.parameters,\
memcpy(&priv->ieee80211->current_network.qos_data.parameters,
&def_qos_parameters, size);
if ((network->qos_data.active == 1) && (active_network == 1)) {
......@@ -2096,24 +2096,24 @@ static int rtl8192_qos_association_resp(struct r8192_priv *priv,
spin_lock_irqsave(&priv->ieee80211->lock, flags);
if(network->flags & NETWORK_HAS_QOS_PARAMETERS) {
memcpy(&priv->ieee80211->current_network.qos_data.parameters,\
&network->qos_data.parameters,\
memcpy(&priv->ieee80211->current_network.qos_data.parameters,
&network->qos_data.parameters,
sizeof(struct ieee80211_qos_parameters));
priv->ieee80211->current_network.qos_data.active = 1;
#if 0
if((priv->ieee80211->current_network.qos_data.param_count != \
if((priv->ieee80211->current_network.qos_data.param_count !=
network->qos_data.param_count))
#endif
{
set_qos_param = 1;
/* update qos parameter for current network */
priv->ieee80211->current_network.qos_data.old_param_count = \
priv->ieee80211->current_network.qos_data.old_param_count =
priv->ieee80211->current_network.qos_data.param_count;
priv->ieee80211->current_network.qos_data.param_count = \
priv->ieee80211->current_network.qos_data.param_count =
network->qos_data.param_count;
}
} else {
memcpy(&priv->ieee80211->current_network.qos_data.parameters,\
memcpy(&priv->ieee80211->current_network.qos_data.parameters,
&def_qos_parameters, size);
priv->ieee80211->current_network.qos_data.active = 0;
priv->ieee80211->current_network.qos_data.supported = 0;
......@@ -2589,9 +2589,9 @@ static void rtl8192_init_priv_variable(struct net_device* dev)
RCR_AAP | ((u32)7<<RCR_MXDMA_OFFSET) |
((u32)7 << RCR_FIFO_OFFSET) | RCR_ONLYERLPKT;
priv->irq_mask = (u32)(IMR_ROK | IMR_VODOK | IMR_VIDOK | IMR_BEDOK | IMR_BKDOK |\
IMR_HCCADOK | IMR_MGNTDOK | IMR_COMDOK | IMR_HIGHDOK |\
IMR_BDOK | IMR_RXCMDOK | IMR_TIMEOUT0 | IMR_RDU | IMR_RXFOVW |\
priv->irq_mask = (u32)(IMR_ROK | IMR_VODOK | IMR_VIDOK | IMR_BEDOK | IMR_BKDOK |
IMR_HCCADOK | IMR_MGNTDOK | IMR_COMDOK | IMR_HIGHDOK |
IMR_BDOK | IMR_RXCMDOK | IMR_TIMEOUT0 | IMR_RDU | IMR_RXFOVW |
IMR_TXFOVW | IMR_BcnInt | IMR_TBDOK | IMR_TBDER);
priv->AcmControl = 0;
......@@ -3314,7 +3314,7 @@ static void rtl8192_hwconfig(struct net_device* dev)
// Set Retry Limit here
//
write_nic_word(dev, RETRY_LIMIT,
priv->ShortRetryLimit << RETRY_LIMIT_SHORT_SHIFT | \
priv->ShortRetryLimit << RETRY_LIMIT_SHORT_SHIFT |
priv->LongRetryLimit << RETRY_LIMIT_LONG_SHIFT);
// Set Contention Window here
......@@ -3469,12 +3469,12 @@ static RT_STATUS rtl8192_adapter_start(struct net_device *dev)
//2Set Tx dma burst
#ifdef RTL8190P
write_nic_byte(dev, PCIF, ((MXDMA2_NoLimit<<MXDMA2_RX_SHIFT) | \
(MXDMA2_NoLimit<<MXDMA2_TX_SHIFT) | \
write_nic_byte(dev, PCIF, ((MXDMA2_NoLimit<<MXDMA2_RX_SHIFT) |
(MXDMA2_NoLimit<<MXDMA2_TX_SHIFT) |
(1<<MULRW_SHIFT)));
#else
#ifdef RTL8192E
write_nic_byte(dev, PCIF, ((MXDMA2_NoLimit<<MXDMA2_RX_SHIFT) |\
write_nic_byte(dev, PCIF, ((MXDMA2_NoLimit<<MXDMA2_RX_SHIFT) |
(MXDMA2_NoLimit<<MXDMA2_TX_SHIFT) ));
#endif
#endif
......@@ -3488,25 +3488,25 @@ static RT_STATUS rtl8192_adapter_start(struct net_device *dev)
#ifdef TO_DO_LIST
if(priv->bInHctTest)
{
PlatformEFIOWrite4Byte(Adapter, RQPN1, NUM_OF_PAGE_IN_FW_QUEUE_BK_DTM << RSVD_FW_QUEUE_PAGE_BK_SHIFT |\
NUM_OF_PAGE_IN_FW_QUEUE_BE_DTM << RSVD_FW_QUEUE_PAGE_BE_SHIFT | \
NUM_OF_PAGE_IN_FW_QUEUE_VI_DTM << RSVD_FW_QUEUE_PAGE_VI_SHIFT | \
PlatformEFIOWrite4Byte(Adapter, RQPN1, NUM_OF_PAGE_IN_FW_QUEUE_BK_DTM << RSVD_FW_QUEUE_PAGE_BK_SHIFT |
NUM_OF_PAGE_IN_FW_QUEUE_BE_DTM << RSVD_FW_QUEUE_PAGE_BE_SHIFT |
NUM_OF_PAGE_IN_FW_QUEUE_VI_DTM << RSVD_FW_QUEUE_PAGE_VI_SHIFT |
NUM_OF_PAGE_IN_FW_QUEUE_VO_DTM <<RSVD_FW_QUEUE_PAGE_VO_SHIFT);
PlatformEFIOWrite4Byte(Adapter, RQPN2, NUM_OF_PAGE_IN_FW_QUEUE_MGNT << RSVD_FW_QUEUE_PAGE_MGNT_SHIFT);
PlatformEFIOWrite4Byte(Adapter, RQPN3, APPLIED_RESERVED_QUEUE_IN_FW| \
NUM_OF_PAGE_IN_FW_QUEUE_BCN<<RSVD_FW_QUEUE_PAGE_BCN_SHIFT|\
PlatformEFIOWrite4Byte(Adapter, RQPN3, APPLIED_RESERVED_QUEUE_IN_FW|
NUM_OF_PAGE_IN_FW_QUEUE_BCN<<RSVD_FW_QUEUE_PAGE_BCN_SHIFT|
NUM_OF_PAGE_IN_FW_QUEUE_PUB_DTM<<RSVD_FW_QUEUE_PAGE_PUB_SHIFT);
}
else
#endif
{
write_nic_dword(dev, RQPN1, NUM_OF_PAGE_IN_FW_QUEUE_BK << RSVD_FW_QUEUE_PAGE_BK_SHIFT |\
NUM_OF_PAGE_IN_FW_QUEUE_BE << RSVD_FW_QUEUE_PAGE_BE_SHIFT | \
NUM_OF_PAGE_IN_FW_QUEUE_VI << RSVD_FW_QUEUE_PAGE_VI_SHIFT | \
write_nic_dword(dev, RQPN1, NUM_OF_PAGE_IN_FW_QUEUE_BK << RSVD_FW_QUEUE_PAGE_BK_SHIFT |
NUM_OF_PAGE_IN_FW_QUEUE_BE << RSVD_FW_QUEUE_PAGE_BE_SHIFT |
NUM_OF_PAGE_IN_FW_QUEUE_VI << RSVD_FW_QUEUE_PAGE_VI_SHIFT |
NUM_OF_PAGE_IN_FW_QUEUE_VO <<RSVD_FW_QUEUE_PAGE_VO_SHIFT);
write_nic_dword(dev, RQPN2, NUM_OF_PAGE_IN_FW_QUEUE_MGNT << RSVD_FW_QUEUE_PAGE_MGNT_SHIFT);
write_nic_dword(dev, RQPN3, APPLIED_RESERVED_QUEUE_IN_FW| \
NUM_OF_PAGE_IN_FW_QUEUE_BCN<<RSVD_FW_QUEUE_PAGE_BCN_SHIFT|\
write_nic_dword(dev, RQPN3, APPLIED_RESERVED_QUEUE_IN_FW|
NUM_OF_PAGE_IN_FW_QUEUE_BCN<<RSVD_FW_QUEUE_PAGE_BCN_SHIFT|
NUM_OF_PAGE_IN_FW_QUEUE_PUB<<RSVD_FW_QUEUE_PAGE_PUB_SHIFT);
}
......@@ -4384,7 +4384,7 @@ void InactivePsWorkItemCallback(struct net_device *dev)
//
pPSC->bSwRfProcessing = TRUE;
RT_TRACE(COMP_RF, "InactivePsWorkItemCallback(): Set RF to %s.\n", \
RT_TRACE(COMP_RF, "InactivePsWorkItemCallback(): Set RF to %s.\n",
pPSC->eInactivePowerState == eRfOff?"OFF":"ON");
......@@ -4667,8 +4667,8 @@ static void rtl819x_watchdog_wqcallback(struct work_struct *work)
// printk("watch_dog ENABLE_IPS\n");
if(ieee->actscanning == false){
//printk("%d,%d,%d,%d\n", ieee->eRFPowerState, ieee->is_set_key, ieee->proto_stoppping, ieee->wx_set_enc);
if((ieee->iw_mode == IW_MODE_INFRA) && (ieee->state == IEEE80211_NOLINK) &&\
(ieee->eRFPowerState == eRfOn)&&!ieee->is_set_key &&\
if((ieee->iw_mode == IW_MODE_INFRA) && (ieee->state == IEEE80211_NOLINK) &&
(ieee->eRFPowerState == eRfOn)&&!ieee->is_set_key &&
(!ieee->proto_stoppping) && !ieee->wx_set_enc){
if(ieee->PowerSaveControl.ReturnPoint == IPS_CALLBACK_NONE){
//printk("====================>haha:IPSEnter()\n");
......@@ -6813,7 +6813,7 @@ void EnableHWSecurityConfig8192(struct net_device *dev)
SECR_value &= ~SCR_RxDecEnable;
}
RT_TRACE(COMP_SEC,"%s:, hwsec:%d, pairwise_key:%d, SECR_value:%x\n", __FUNCTION__, \
RT_TRACE(COMP_SEC,"%s:, hwsec:%d, pairwise_key:%d, SECR_value:%x\n", __FUNCTION__,
ieee->hwsec_active, ieee->pairwise_key_type, SECR_value);
{
write_nic_byte(dev, SECR, SECR_value);//SECR_value | SCR_UseDK );
......
......@@ -104,7 +104,7 @@ pHalData->bHwRfOffAction = 2;
netif_device_detach(dev);
pci_save_state(pdev);
pci_disable_device(pdev);
pci_enable_wake(pdev, pci_choose_state(pdev,state),\
pci_enable_wake(pdev, pci_choose_state(pdev,state),
priv->ieee80211->bSupportRemoteWakeUp?1:0);
pci_set_power_state(pdev,pci_choose_state(pdev,state));
......
......@@ -91,16 +91,16 @@ static bool fw_download_code(struct net_device *dev, u8 *code_virtual_address,
* Transform from little endian to big endian and pending zero
*/
for (i = 0; i < frag_length; i += 4) {
*seg_ptr++ = ((i+0) < frag_length) ? \
*seg_ptr++ = ((i+0) < frag_length) ?
code_virtual_address[i+3] : 0;
*seg_ptr++ = ((i+1) < frag_length) ? \
*seg_ptr++ = ((i+1) < frag_length) ?
code_virtual_address[i+2] : 0;
*seg_ptr++ = ((i+2) < frag_length) ? \
*seg_ptr++ = ((i+2) < frag_length) ?
code_virtual_address[i+1] : 0;
*seg_ptr++ = ((i+3) < frag_length) ? \
*seg_ptr++ = ((i+3) < frag_length) ?
code_virtual_address[i+0] : 0;
}
tcb_desc->txbuf_size = (u16)i;
......@@ -249,7 +249,7 @@ bool init_firmware(struct net_device *dev)
* Download boot, main, and data image for System reset.
* Download data image for firmware reseta
*/
for (init_step = starting_state; init_step <= FW_INIT_STEP2_DATA; \
for (init_step = starting_state; init_step <= FW_INIT_STEP2_DATA;
init_step++) {
/*
* Open Image file, and map file to contineous memory if open file success.
......@@ -266,7 +266,7 @@ bool init_firmware(struct net_device *dev)
}
if (fw_entry->size > sizeof(pfirmware->firmware_buf[init_step])) {
RT_TRACE(COMP_FIRMWARE, \
RT_TRACE(COMP_FIRMWARE,
"img file size exceed the container buffer fail!\n");
goto download_firmware_fail;
}
......
......@@ -3088,7 +3088,7 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev)
struct r8192_priv *priv = ieee80211_priv(dev);
u8 regBwOpMode;
RT_TRACE(COMP_SWBW, "==>rtl8192_SetBWModeWorkItem() Switch to %s bandwidth\n", \
RT_TRACE(COMP_SWBW, "==>rtl8192_SetBWModeWorkItem() Switch to %s bandwidth\n",
priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20?"20MHz":"40MHz")
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册