提交 1f1aed2e 编写于 作者: H Hans Verkuil 提交者: Mauro Carvalho Chehab

[media] go7007: add support for ADS Tech DVD Xpress DX2

Taken from the 0.9.8-5 version of the out-of-tree wis-go7007 driver.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 a000e9a0
......@@ -9,6 +9,7 @@ config VIDEO_GO7007
select VIDEO_SAA711X if MEDIA_SUBDRV_AUTOSELECT
select VIDEO_TW2804 if MEDIA_SUBDRV_AUTOSELECT
select VIDEO_TW9903 if MEDIA_SUBDRV_AUTOSELECT
select VIDEO_TW9906 if MEDIA_SUBDRV_AUTOSELECT
select VIDEO_OV7640 if MEDIA_SUBDRV_AUTOSELECT
select VIDEO_UDA1342 if MEDIA_SUBDRV_AUTOSELECT
default N
......
......@@ -166,15 +166,24 @@ static int go7007_init_encoder(struct go7007 *go)
go7007_write_addr(go, 0x1000, 0x0811);
go7007_write_addr(go, 0x1000, 0x0c11);
}
if (go->board_id == GO7007_BOARDID_MATRIX_REV) {
switch (go->board_id) {
case GO7007_BOARDID_MATRIX_REV:
/* Set GPIO pin 0 to be an output (audio clock control) */
go7007_write_addr(go, 0x3c82, 0x0001);
go7007_write_addr(go, 0x3c80, 0x00fe);
}
if (go->board_id == GO7007_BOARDID_ADLINK_MPG24) {
break;
case GO7007_BOARDID_ADLINK_MPG24:
/* set GPIO5 to be an output, currently low */
go7007_write_addr(go, 0x3c82, 0x0000);
go7007_write_addr(go, 0x3c80, 0x00df);
break;
case GO7007_BOARDID_ADS_USBAV_709:
/* GPIO pin 0: audio clock control */
/* pin 2: TW9906 reset */
/* pin 3: capture LED */
go7007_write_addr(go, 0x3c82, 0x000d);
go7007_write_addr(go, 0x3c80, 0x00f2);
break;
}
return 0;
}
......@@ -282,6 +291,12 @@ int go7007_register_encoder(struct go7007 *go, unsigned num_i2c_devs)
go->i2c_adapter_online = 1;
}
if (go->i2c_adapter_online) {
if (go->board_id == GO7007_BOARDID_ADS_USBAV_709) {
/* Reset the TW9906 */
go7007_write_addr(go, 0x3c82, 0x0009);
msleep(50);
go7007_write_addr(go, 0x3c82, 0x000d);
}
for (i = 0; i < num_i2c_devs; ++i)
init_i2c_module(&go->i2c_adapter, &go->board_info->i2c_devs[i]);
......
......@@ -43,6 +43,7 @@ struct go7007;
#define GO7007_BOARDID_ENDURA 11
#define GO7007_BOARDID_ADLINK_MPG24 12
#define GO7007_BOARDID_SENSORAY_2250 13 /* Sensoray 2250/2251 */
#define GO7007_BOARDID_ADS_USBAV_709 14
/* Various characteristics of each board */
#define GO7007_BOARD_HAS_AUDIO (1<<0)
......
......@@ -476,6 +476,43 @@ static const struct go7007_usb_board board_sensoray_2250 = {
},
};
static const struct go7007_usb_board board_ads_usbav_709 = {
.flags = GO7007_USB_EZUSB,
.main_info = {
.flags = GO7007_BOARD_HAS_AUDIO |
GO7007_BOARD_USE_ONBOARD_I2C,
.audio_flags = GO7007_AUDIO_I2S_MODE_1 |
GO7007_AUDIO_I2S_MASTER |
GO7007_AUDIO_WORD_16,
.audio_rate = 48000,
.audio_bclk_div = 8,
.audio_main_div = 2,
.hpi_buffer_cap = 7,
.sensor_flags = GO7007_SENSOR_656 |
GO7007_SENSOR_TV |
GO7007_SENSOR_VBI,
.num_i2c_devs = 1,
.i2c_devs = {
{
.type = "tw9906",
.is_video = 1,
.addr = 0x44,
},
},
.num_inputs = 2,
.inputs = {
{
.video_input = 0,
.name = "Composite",
},
{
.video_input = 10,
.name = "S-Video",
},
},
},
};
static const struct usb_device_id go7007_usb_id_table[] = {
{
.match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION |
......@@ -577,6 +614,14 @@ static const struct usb_device_id go7007_usb_id_table[] = {
.bcdDevice_hi = 0x1,
.driver_info = (kernel_ulong_t)GO7007_BOARDID_SENSORAY_2250,
},
{
.match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION,
.idVendor = 0x06e1, /* Vendor ID of ADS Technologies */
.idProduct = 0x0709, /* Product ID of DVD Xpress DX2 */
.bcdDevice_lo = 0x204,
.bcdDevice_hi = 0x204,
.driver_info = (kernel_ulong_t)GO7007_BOARDID_ADS_USBAV_709,
},
{ } /* Terminating entry */
};
......@@ -1086,6 +1131,10 @@ static int go7007_usb_probe(struct usb_interface *intf,
name = "Sensoray 2250/2251";
board = &board_sensoray_2250;
break;
case GO7007_BOARDID_ADS_USBAV_709:
name = "ADS Tech DVD Xpress DX2";
board = &board_ads_usbav_709;
break;
default:
printk(KERN_ERR "go7007-usb: unknown board ID %d!\n",
(unsigned int)id->driver_info);
......
......@@ -512,6 +512,9 @@ static int go7007_start_streaming(struct vb2_queue *q, unsigned int count)
v4l2_ctrl_grab(go->mpeg_video_gop_closure, true);
v4l2_ctrl_grab(go->mpeg_video_bitrate, true);
v4l2_ctrl_grab(go->mpeg_video_aspect_ratio, true);
/* Turn on Capture LED */
if (go->board_id == GO7007_BOARDID_ADS_USBAV_709)
go7007_write_addr(go, 0x3c82, 0x0005);
return ret;
}
......@@ -534,6 +537,9 @@ static int go7007_stop_streaming(struct vb2_queue *q)
v4l2_ctrl_grab(go->mpeg_video_gop_closure, false);
v4l2_ctrl_grab(go->mpeg_video_bitrate, false);
v4l2_ctrl_grab(go->mpeg_video_aspect_ratio, false);
/* Turn on Capture LED */
if (go->board_id == GO7007_BOARDID_ADS_USBAV_709)
go7007_write_addr(go, 0x3c82, 0x000d);
return 0;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册