提交 1eb68b99 编写于 作者: B Bryan O'Sullivan 提交者: Linus Torvalds

[PATCH] IB/ipath: purge sps_lid and sps_mlid arrays

The two arrays only had space for 4 units.

Also changed from ipath_set_sps_lid() to ipath_set_lid(); the sps was
leftover.
Signed-off-by: NDave Olson <dave.olson@qlogic.com>
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
上级 12eef41f
......@@ -122,8 +122,7 @@ struct infinipath_stats {
__u64 sps_ports;
/* list of pkeys (other than default) accepted (0 means not set) */
__u16 sps_pkeys[4];
/* lids for up to 4 infinipaths, indexed by infinipath # */
__u16 sps_lid[4];
__u16 sps_unused16[4]; /* available; maintaining compatible layout */
/* number of user ports per chip (not IB ports) */
__u32 sps_nports;
/* not our interrupt, or already handled */
......@@ -141,10 +140,8 @@ struct infinipath_stats {
* packets if ipath not configured, sma/mad, etc.)
*/
__u64 sps_krdrops;
/* mlids for up to 4 infinipaths, indexed by infinipath # */
__u16 sps_mlid[4];
/* pad for future growth */
__u64 __sps_pad[45];
__u64 __sps_pad[46];
};
/*
......
......@@ -811,8 +811,6 @@ int ipath_init_chip(struct ipath_devdata *dd, int reinit)
/* clear any interrups up to this point (ints still not enabled) */
ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, -1LL);
ipath_stats.sps_lid[dd->ipath_unit] = dd->ipath_lid;
/*
* Set up the port 0 (kernel) rcvhdr q and egr TIDs. If doing
* re-init, the simplest way to handle this is to free
......
......@@ -300,9 +300,8 @@ int ipath_layer_set_mtu(struct ipath_devdata *dd, u16 arg)
EXPORT_SYMBOL_GPL(ipath_layer_set_mtu);
int ipath_set_sps_lid(struct ipath_devdata *dd, u32 arg, u8 lmc)
int ipath_set_lid(struct ipath_devdata *dd, u32 arg, u8 lmc)
{
ipath_stats.sps_lid[dd->ipath_unit] = arg;
dd->ipath_lid = arg;
dd->ipath_lmc = lmc;
......@@ -316,7 +315,7 @@ int ipath_set_sps_lid(struct ipath_devdata *dd, u32 arg, u8 lmc)
return 0;
}
EXPORT_SYMBOL_GPL(ipath_set_sps_lid);
EXPORT_SYMBOL_GPL(ipath_set_lid);
int ipath_layer_set_guid(struct ipath_devdata *dd, __be64 guid)
{
......@@ -632,9 +631,9 @@ int ipath_layer_open(struct ipath_devdata *dd, u32 * pktmax)
if (*dd->ipath_statusp & IPATH_STATUS_IB_READY)
intval |= IPATH_LAYER_INT_IF_UP;
if (ipath_stats.sps_lid[dd->ipath_unit])
if (dd->ipath_lid)
intval |= IPATH_LAYER_INT_LID;
if (ipath_stats.sps_mlid[dd->ipath_unit])
if (dd->ipath_mlid)
intval |= IPATH_LAYER_INT_BCAST;
/*
* do this on open, in case low level is already up and
......
......@@ -129,7 +129,7 @@ u16 ipath_layer_get_bcast(struct ipath_devdata *dd);
u32 ipath_layer_get_cr_errpkey(struct ipath_devdata *dd);
int ipath_layer_set_linkstate(struct ipath_devdata *dd, u8 state);
int ipath_layer_set_mtu(struct ipath_devdata *, u16);
int ipath_set_sps_lid(struct ipath_devdata *, u32, u8);
int ipath_set_lid(struct ipath_devdata *, u32, u8);
int ipath_layer_send_hdr(struct ipath_devdata *dd,
struct ether_header *hdr);
int ipath_verbs_send(struct ipath_devdata *dd, u32 hdrwords,
......
......@@ -308,7 +308,7 @@ static int recv_subn_set_portinfo(struct ib_smp *smp,
/* Must be a valid unicast LID address. */
if (lid == 0 || lid >= IPS_MULTICAST_LID_BASE)
goto err;
ipath_set_sps_lid(dev->dd, lid, pip->mkeyprot_resv_lmc & 7);
ipath_set_lid(dev->dd, lid, pip->mkeyprot_resv_lmc & 7);
event.event = IB_EVENT_LID_CHANGE;
ib_dispatch_event(&event);
}
......
......@@ -115,11 +115,6 @@ DRIVER_STAT(pkey0, pkeys[0]);
DRIVER_STAT(pkey1, pkeys[1]);
DRIVER_STAT(pkey2, pkeys[2]);
DRIVER_STAT(pkey3, pkeys[3]);
/* XXX fix the following when dynamic table of devices used */
DRIVER_STAT(lid0, lid[0]);
DRIVER_STAT(lid1, lid[1]);
DRIVER_STAT(lid2, lid[2]);
DRIVER_STAT(lid3, lid[3]);
DRIVER_STAT(nports, nports);
DRIVER_STAT(null_intr, nullintr);
......@@ -128,11 +123,6 @@ DRIVER_STAT(avg_pkts_call, avgpkts_call);
DRIVER_STAT(page_locks, pagelocks);
DRIVER_STAT(page_unlocks, pageunlocks);
DRIVER_STAT(krdrops, krdrops);
/* XXX fix the following when dynamic table of devices used */
DRIVER_STAT(mlid0, mlid[0]);
DRIVER_STAT(mlid1, mlid[1]);
DRIVER_STAT(mlid2, mlid[2]);
DRIVER_STAT(mlid3, mlid[3]);
static struct attribute *driver_stat_attributes[] = {
&driver_attr_intrs.attr,
......@@ -155,10 +145,6 @@ static struct attribute *driver_stat_attributes[] = {
&driver_attr_pkey1.attr,
&driver_attr_pkey2.attr,
&driver_attr_pkey3.attr,
&driver_attr_lid0.attr,
&driver_attr_lid1.attr,
&driver_attr_lid2.attr,
&driver_attr_lid3.attr,
&driver_attr_nports.attr,
&driver_attr_null_intr.attr,
&driver_attr_max_pkts_call.attr,
......@@ -166,10 +152,6 @@ static struct attribute *driver_stat_attributes[] = {
&driver_attr_page_locks.attr,
&driver_attr_page_unlocks.attr,
&driver_attr_krdrops.attr,
&driver_attr_mlid0.attr,
&driver_attr_mlid1.attr,
&driver_attr_mlid2.attr,
&driver_attr_mlid3.attr,
NULL
};
......@@ -273,7 +255,7 @@ static ssize_t store_lid(struct device *dev,
size_t count)
{
struct ipath_devdata *dd = dev_get_drvdata(dev);
u16 lid;
u16 lid = 0;
int ret;
ret = ipath_parse_ushort(buf, &lid);
......@@ -285,11 +267,11 @@ static ssize_t store_lid(struct device *dev,
goto invalid;
}
ipath_set_sps_lid(dd, lid, 0);
ipath_set_lid(dd, lid, 0);
goto bail;
invalid:
ipath_dev_err(dd, "attempt to set invalid LID\n");
ipath_dev_err(dd, "attempt to set invalid LID 0x%x\n", lid);
bail:
return ret;
}
......@@ -320,7 +302,6 @@ static ssize_t store_mlid(struct device *dev,
unit = dd->ipath_unit;
dd->ipath_mlid = mlid;
ipath_stats.sps_mlid[unit] = mlid;
ipath_layer_intr(dd, IPATH_LAYER_INT_BCAST);
goto bail;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册