From 1e12c4a9393b75a744aada2c8115434572698bc3 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Thu, 11 Aug 2016 14:19:42 +0100 Subject: [PATCH] genirq: Correctly configure the trigger on chained interrupts Commit 1e2a7d78499e ("irqdomain: Don't set type when mapping an IRQ") moved the trigger configuration call from the irqdomain mapping to the interrupt being actually requested. This patch failed to handle the case where we configure a chained interrupt, which doesn't get requested through the usual path. In order to solve this, let's call __irq_set_trigger just before starting the cascade interrupt. Special care must be taken to make the flow handler stick, as the .irq_set_type method could have reset it (it doesn't know we're dealing with a chained interrupt). Based on an initial patch by Jon Hunter. Fixes: 1e2a7d78499e ("irqdomain: Don't set type when mapping an IRQ") Reported-by: John Stultz Reported-by: Linus Walleij Tested-by: John Stultz Acked-by: Jon Hunter Signed-off-by: Marc Zyngier --- kernel/irq/chip.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c index b4c1bc7c9ca2..637389088b3f 100644 --- a/kernel/irq/chip.c +++ b/kernel/irq/chip.c @@ -820,6 +820,17 @@ __irq_do_set_handler(struct irq_desc *desc, irq_flow_handler_t handle, desc->name = name; if (handle != handle_bad_irq && is_chained) { + /* + * We're about to start this interrupt immediately, + * hence the need to set the trigger configuration. + * But the .set_type callback may have overridden the + * flow handler, ignoring that we're dealing with a + * chained interrupt. Reset it immediately because we + * do know better. + */ + __irq_set_trigger(desc, irqd_get_trigger_type(&desc->irq_data)); + desc->handle_irq = handle; + irq_settings_set_noprobe(desc); irq_settings_set_norequest(desc); irq_settings_set_nothread(desc); -- GitLab