提交 1ce42845 编写于 作者: L Linus Torvalds

Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:
 "Last minute x86 fixes:

   - Fix a softlockup detector warning and long delays if using ptdump
     with KASAN enabled.

   - Two more TSC-adjust fixes for interesting firmware interactions.

   - Two commits to fix an AMD CPU topology enumeration bug that caused
     a measurable gaming performance regression"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm/ptdump: Fix soft lockup in page table walker
  x86/tsc: Make the TSC ADJUST sanitizing work for tsc_reliable
  x86/tsc: Avoid the large time jump when sanitizing TSC ADJUST
  x86/CPU/AMD: Fix Zen SMT topology
  x86/CPU/AMD: Bring back Compute Unit ID
......@@ -104,6 +104,7 @@ struct cpuinfo_x86 {
__u8 x86_phys_bits;
/* CPUID returned core id bits: */
__u8 x86_coreid_bits;
__u8 cu_id;
/* Max extended CPUID function supported: */
__u32 extended_cpuid_level;
/* Maximum supported CPUID level, -1=no CPUID: */
......
......@@ -309,8 +309,22 @@ static void amd_get_topology(struct cpuinfo_x86 *c)
/* get information required for multi-node processors */
if (boot_cpu_has(X86_FEATURE_TOPOEXT)) {
u32 eax, ebx, ecx, edx;
node_id = cpuid_ecx(0x8000001e) & 7;
cpuid(0x8000001e, &eax, &ebx, &ecx, &edx);
node_id = ecx & 0xff;
smp_num_siblings = ((ebx >> 8) & 0xff) + 1;
if (c->x86 == 0x15)
c->cu_id = ebx & 0xff;
if (c->x86 >= 0x17) {
c->cpu_core_id = ebx & 0xff;
if (smp_num_siblings > 1)
c->x86_max_cores /= smp_num_siblings;
}
/*
* We may have multiple LLCs if L3 caches exist, so check if we
......
......@@ -1015,6 +1015,7 @@ static void identify_cpu(struct cpuinfo_x86 *c)
c->x86_model_id[0] = '\0'; /* Unset */
c->x86_max_cores = 1;
c->x86_coreid_bits = 0;
c->cu_id = 0xff;
#ifdef CONFIG_X86_64
c->x86_clflush_size = 64;
c->x86_phys_bits = 36;
......
......@@ -433,10 +433,16 @@ static bool match_smt(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o)
int cpu1 = c->cpu_index, cpu2 = o->cpu_index;
if (c->phys_proc_id == o->phys_proc_id &&
per_cpu(cpu_llc_id, cpu1) == per_cpu(cpu_llc_id, cpu2) &&
c->cpu_core_id == o->cpu_core_id)
per_cpu(cpu_llc_id, cpu1) == per_cpu(cpu_llc_id, cpu2)) {
if (c->cpu_core_id == o->cpu_core_id)
return topology_sane(c, o, "smt");
if ((c->cu_id != 0xff) &&
(o->cu_id != 0xff) &&
(c->cu_id == o->cu_id))
return topology_sane(c, o, "smt");
}
} else if (c->phys_proc_id == o->phys_proc_id &&
c->cpu_core_id == o->cpu_core_id) {
return topology_sane(c, o, "smt");
......
......@@ -1356,6 +1356,9 @@ void __init tsc_init(void)
(unsigned long)cpu_khz / 1000,
(unsigned long)cpu_khz % 1000);
/* Sanitize TSC ADJUST before cyc2ns gets initialized */
tsc_store_and_check_tsc_adjust(true);
/*
* Secondary CPUs do not run through tsc_init(), so set up
* all the scale factors for all CPUs, assuming the same
......@@ -1386,8 +1389,6 @@ void __init tsc_init(void)
if (unsynchronized_tsc())
mark_tsc_unstable("TSCs unsynchronized");
else
tsc_store_and_check_tsc_adjust(true);
check_system_tsc_reliable();
......
......@@ -286,13 +286,6 @@ void check_tsc_sync_source(int cpu)
if (unsynchronized_tsc())
return;
if (tsc_clocksource_reliable) {
if (cpu == (nr_cpu_ids-1) || system_state != SYSTEM_BOOTING)
pr_info(
"Skipped synchronization checks as TSC is reliable.\n");
return;
}
/*
* Set the maximum number of test runs to
* 1 if the CPU does not provide the TSC_ADJUST MSR
......@@ -380,14 +373,19 @@ void check_tsc_sync_target(void)
int cpus = 2;
/* Also aborts if there is no TSC. */
if (unsynchronized_tsc() || tsc_clocksource_reliable)
if (unsynchronized_tsc())
return;
/*
* Store, verify and sanitize the TSC adjust register. If
* successful skip the test.
*
* The test is also skipped when the TSC is marked reliable. This
* is true for SoCs which have no fallback clocksource. On these
* SoCs the TSC is frequency synchronized, but still the TSC ADJUST
* register might have been wreckaged by the BIOS..
*/
if (tsc_store_and_check_tsc_adjust(false)) {
if (tsc_store_and_check_tsc_adjust(false) || tsc_clocksource_reliable) {
atomic_inc(&skip_test);
return;
}
......
......@@ -15,6 +15,7 @@
#include <linux/debugfs.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/seq_file.h>
#include <asm/pgtable.h>
......@@ -406,6 +407,7 @@ static void ptdump_walk_pgd_level_core(struct seq_file *m, pgd_t *pgd,
} else
note_page(m, &st, __pgprot(0), 1);
cond_resched();
start++;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册