提交 1c974dc2 编写于 作者: D Dave Airlie

Merge remote branch 'nouveau/for-airlied' of ../drm-nouveau-next into drm-linus

* 'nouveau/for-airlied' of ../drm-nouveau-next: (44 commits)
  drm/nouveau: check pushbuffer bounds in ioctl
  drm/nouveau: reserve VGA area for the moment
  drm/nouveau: Unset the EDID connector property when the EDID block goes away.
  drm/nouveau: Fallback to analog load detection when the EDID block is invalid.
  drm/nouveau: fix edid memleak in nouveau_connector
  drm/nouveau: Break some long lines.
  drm/nouveau: add NV18 device id to call_lvds_manufacturer_script
  drm/nv50: Fix typo in PGRAPH initialisation.
  drm/nouveau: less magic DCB 1.5 parsing
  drm/nouveau: assume no nv04 board has a DCB table
  drm/nouveau: remove PRIV0 check in nouveau_mem_close()
  drm/nouveau: wait on fence after bo move if validating for another channel
  drm/nouveau: trust init table registers are safe
  drm/nv50: wait for pgraph to idle before unloading the context
......@@ -310,63 +310,22 @@ valid_reg(struct nvbios *bios, uint32_t reg)
struct drm_device *dev = bios->dev;
/* C51 has misaligned regs on purpose. Marvellous */
if (reg & 0x2 || (reg & 0x1 && dev_priv->VBIOS.pub.chip_version != 0x51)) {
NV_ERROR(dev, "========== misaligned reg 0x%08X ==========\n",
reg);
return 0;
}
/*
* Warn on C51 regs that have not been verified accessible in
* mmiotracing
*/
if (reg & 0x2 ||
(reg & 0x1 && dev_priv->VBIOS.pub.chip_version != 0x51))
NV_ERROR(dev, "======= misaligned reg 0x%08X =======\n", reg);
/* warn on C51 regs that haven't been verified accessible in tracing */
if (reg & 0x1 && dev_priv->VBIOS.pub.chip_version == 0x51 &&
reg != 0x130d && reg != 0x1311 && reg != 0x60081d)
NV_WARN(dev, "=== C51 misaligned reg 0x%08X not verified ===\n",
reg);
/* Trust the init scripts on G80 */
if (dev_priv->card_type >= NV_50)
return 1;
#define WITHIN(x, y, z) ((x >= y) && (x < y + z))
if (WITHIN(reg, NV_PMC_OFFSET, NV_PMC_SIZE))
return 1;
if (WITHIN(reg, NV_PBUS_OFFSET, NV_PBUS_SIZE))
return 1;
if (WITHIN(reg, NV_PFIFO_OFFSET, NV_PFIFO_SIZE))
return 1;
if (dev_priv->VBIOS.pub.chip_version >= 0x30 &&
(WITHIN(reg, 0x4000, 0x600) || reg == 0x00004600))
return 1;
if (dev_priv->VBIOS.pub.chip_version >= 0x40 &&
WITHIN(reg, 0xc000, 0x48))
return 1;
if (dev_priv->VBIOS.pub.chip_version >= 0x17 && reg == 0x0000d204)
return 1;
if (dev_priv->VBIOS.pub.chip_version >= 0x40) {
if (reg == 0x00011014 || reg == 0x00020328)
return 1;
if (WITHIN(reg, 0x88000, NV_PBUS_SIZE)) /* new PBUS */
return 1;
if (reg >= (8*1024*1024)) {
NV_ERROR(dev, "=== reg 0x%08x out of mapped bounds ===\n", reg);
return 0;
}
if (WITHIN(reg, NV_PFB_OFFSET, NV_PFB_SIZE))
return 1;
if (WITHIN(reg, NV_PEXTDEV_OFFSET, NV_PEXTDEV_SIZE))
return 1;
if (WITHIN(reg, NV_PCRTC0_OFFSET, NV_PCRTC0_SIZE * 2))
return 1;
if (WITHIN(reg, NV_PRAMDAC0_OFFSET, NV_PRAMDAC0_SIZE * 2))
return 1;
if (dev_priv->VBIOS.pub.chip_version >= 0x17 && reg == 0x0070fff0)
return 1;
if (dev_priv->VBIOS.pub.chip_version == 0x51 &&
WITHIN(reg, NV_PRAMIN_OFFSET, NV_PRAMIN_SIZE))
return 1;
#undef WITHIN
NV_ERROR(dev, "========== unknown reg 0x%08X ==========\n", reg);
return 0;
return 1;
}
static bool
......@@ -3196,16 +3155,25 @@ static int call_lvds_manufacturer_script(struct drm_device *dev, struct dcb_entr
}
#ifdef __powerpc__
/* Powerbook specific quirks */
if (script == LVDS_RESET && ((dev->pci_device & 0xffff) == 0x0179 || (dev->pci_device & 0xffff) == 0x0329))
if ((dev->pci_device & 0xffff) == 0x0179 ||
(dev->pci_device & 0xffff) == 0x0189 ||
(dev->pci_device & 0xffff) == 0x0329) {
if (script == LVDS_RESET) {
nv_write_tmds(dev, dcbent->or, 0, 0x02, 0x72);
if ((dev->pci_device & 0xffff) == 0x0179 || (dev->pci_device & 0xffff) == 0x0189 || (dev->pci_device & 0xffff) == 0x0329) {
if (script == LVDS_PANEL_ON) {
bios_wr32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL, bios_rd32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL) | (1 << 31));
bios_wr32(bios, NV_PCRTC_GPIO_EXT, bios_rd32(bios, NV_PCRTC_GPIO_EXT) | 1);
}
if (script == LVDS_PANEL_OFF) {
bios_wr32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL, bios_rd32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL) & ~(1 << 31));
bios_wr32(bios, NV_PCRTC_GPIO_EXT, bios_rd32(bios, NV_PCRTC_GPIO_EXT) & ~3);
} else if (script == LVDS_PANEL_ON) {
bios_wr32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL,
bios_rd32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL)
| (1 << 31));
bios_wr32(bios, NV_PCRTC_GPIO_EXT,
bios_rd32(bios, NV_PCRTC_GPIO_EXT) | 1);
} else if (script == LVDS_PANEL_OFF) {
bios_wr32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL,
bios_rd32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL)
& ~(1 << 31));
bios_wr32(bios, NV_PCRTC_GPIO_EXT,
bios_rd32(bios, NV_PCRTC_GPIO_EXT) & ~3);
}
}
#endif
......@@ -5434,52 +5402,49 @@ static bool
parse_dcb15_entry(struct drm_device *dev, struct parsed_dcb *dcb,
uint32_t conn, uint32_t conf, struct dcb_entry *entry)
{
if (conn != 0xf0003f00 && conn != 0xf2247f10 && conn != 0xf2204001 &&
conn != 0xf2204301 && conn != 0xf2204311 && conn != 0xf2208001 &&
conn != 0xf2244001 && conn != 0xf2244301 && conn != 0xf2244311 &&
conn != 0xf4204011 && conn != 0xf4208011 && conn != 0xf4248011 &&
conn != 0xf2045ff2 && conn != 0xf2045f14 && conn != 0xf207df14 &&
conn != 0xf2205004 && conn != 0xf2209004) {
NV_ERROR(dev, "Unknown DCB 1.5 entry, please report\n");
/* cause output setting to fail for !TV, so message is seen */
if ((conn & 0xf) != 0x1)
dcb->entries = 0;
return false;
}
/* most of the below is a "best guess" atm */
entry->type = conn & 0xf;
if (entry->type == 2)
/* another way of specifying straps based lvds... */
entry->type = OUTPUT_LVDS;
if (entry->type == 4) { /* digital */
if (conn & 0x10)
switch (conn & 0x0000000f) {
case 0:
entry->type = OUTPUT_ANALOG;
break;
case 1:
entry->type = OUTPUT_TV;
break;
case 2:
case 3:
entry->type = OUTPUT_LVDS;
else
break;
case 4:
switch ((conn & 0x000000f0) >> 4) {
case 0:
entry->type = OUTPUT_TMDS;
break;
case 1:
entry->type = OUTPUT_LVDS;
break;
default:
NV_ERROR(dev, "Unknown DCB subtype 4/%d\n",
(conn & 0x000000f0) >> 4);
return false;
}
break;
default:
NV_ERROR(dev, "Unknown DCB type %d\n", conn & 0x0000000f);
return false;
}
/* what's in bits 5-13? could be some encoder maker thing, in tv case */
entry->i2c_index = (conn >> 14) & 0xf;
/* raw heads field is in range 0-1, so move to 1-2 */
entry->heads = ((conn >> 18) & 0x7) + 1;
entry->location = (conn >> 21) & 0xf;
/* unused: entry->bus = (conn >> 25) & 0x7; */
/* set or to be same as heads -- hopefully safe enough */
entry->or = entry->heads;
entry->i2c_index = (conn & 0x0003c000) >> 14;
entry->heads = ((conn & 0x001c0000) >> 18) + 1;
entry->or = entry->heads; /* same as heads, hopefully safe enough */
entry->location = (conn & 0x01e00000) >> 21;
entry->bus = (conn & 0x0e000000) >> 25;
entry->duallink_possible = false;
switch (entry->type) {
case OUTPUT_ANALOG:
entry->crtconf.maxfreq = (conf & 0xffff) * 10;
break;
case OUTPUT_LVDS:
/*
* This is probably buried in conn's unknown bits.
* This will upset EDID-ful models, if they exist
*/
entry->lvdsconf.use_straps_for_mode = true;
entry->lvdsconf.use_power_scripts = true;
case OUTPUT_TV:
entry->tvconf.has_component_output = false;
break;
case OUTPUT_TMDS:
/*
......@@ -5488,8 +5453,12 @@ parse_dcb15_entry(struct drm_device *dev, struct parsed_dcb *dcb,
*/
fabricate_vga_output(dcb, entry->i2c_index, entry->heads);
break;
case OUTPUT_TV:
entry->tvconf.has_component_output = false;
case OUTPUT_LVDS:
if ((conn & 0x00003f00) != 0x10)
entry->lvdsconf.use_straps_for_mode = true;
entry->lvdsconf.use_power_scripts = true;
break;
default:
break;
}
......@@ -5564,11 +5533,13 @@ void merge_like_dcb_entries(struct drm_device *dev, struct parsed_dcb *dcb)
dcb->entries = newentries;
}
static int parse_dcb_table(struct drm_device *dev, struct nvbios *bios, bool twoHeads)
static int
parse_dcb_table(struct drm_device *dev, struct nvbios *bios, bool twoHeads)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct bios_parsed_dcb *bdcb = &bios->bdcb;
struct parsed_dcb *dcb;
uint16_t dcbptr, i2ctabptr = 0;
uint16_t dcbptr = 0, i2ctabptr = 0;
uint8_t *dcbtable;
uint8_t headerlen = 0x4, entries = DCB_MAX_NUM_ENTRIES;
bool configblock = true;
......@@ -5579,16 +5550,18 @@ static int parse_dcb_table(struct drm_device *dev, struct nvbios *bios, bool two
dcb->entries = 0;
/* get the offset from 0x36 */
if (dev_priv->card_type > NV_04) {
dcbptr = ROM16(bios->data[0x36]);
if (dcbptr == 0x0000)
NV_WARN(dev, "No output data (DCB) found in BIOS\n");
}
if (dcbptr == 0x0) {
NV_WARN(dev, "No output data (DCB) found in BIOS, "
"assuming a CRT output exists\n");
/* this situation likely means a really old card, pre DCB */
if (dcbptr == 0x0) {
NV_INFO(dev, "Assuming a CRT output exists\n");
fabricate_vga_output(dcb, LEGACY_I2C_CRT, 1);
if (nv04_tv_identify(dev,
bios->legacy.i2c_indices.tv) >= 0)
if (nv04_tv_identify(dev, bios->legacy.i2c_indices.tv) >= 0)
fabricate_tv_output(dcb, twoHeads);
return 0;
......
......@@ -469,6 +469,8 @@ nouveau_bo_move_accel_cleanup(struct nouveau_channel *chan,
ret = ttm_bo_move_accel_cleanup(&nvbo->bo, fence, NULL,
evict, no_wait, new_mem);
if (nvbo->channel && nvbo->channel != chan)
ret = nouveau_fence_wait(fence, NULL, false, false);
nouveau_fence_unref((void *)&fence);
return ret;
}
......
......@@ -83,14 +83,16 @@ nouveau_encoder_connector_get(struct nouveau_encoder *encoder)
static void
nouveau_connector_destroy(struct drm_connector *drm_connector)
{
struct nouveau_connector *connector = nouveau_connector(drm_connector);
struct drm_device *dev = connector->base.dev;
struct nouveau_connector *nv_connector =
nouveau_connector(drm_connector);
struct drm_device *dev = nv_connector->base.dev;
NV_DEBUG_KMS(dev, "\n");
if (!connector)
if (!nv_connector)
return;
kfree(nv_connector->edid);
drm_sysfs_connector_remove(drm_connector);
drm_connector_cleanup(drm_connector);
kfree(drm_connector);
......@@ -237,6 +239,13 @@ nouveau_connector_detect(struct drm_connector *connector)
return connector_status_connected;
}
/* Cleanup the previous EDID block. */
if (nv_connector->edid) {
drm_mode_connector_update_edid_property(connector, NULL);
kfree(nv_connector->edid);
nv_connector->edid = NULL;
}
i2c = nouveau_connector_ddc_detect(connector, &nv_encoder);
if (i2c) {
nouveau_connector_ddc_prepare(connector, &flags);
......@@ -247,7 +256,7 @@ nouveau_connector_detect(struct drm_connector *connector)
if (!nv_connector->edid) {
NV_ERROR(dev, "DDC responded, but no EDID for %s\n",
drm_get_connector_name(connector));
return connector_status_disconnected;
goto detect_analog;
}
if (nv_encoder->dcb->type == OUTPUT_DP &&
......@@ -281,6 +290,7 @@ nouveau_connector_detect(struct drm_connector *connector)
return connector_status_connected;
}
detect_analog:
nv_encoder = find_encoder_by_type(connector, OUTPUT_ANALOG);
if (!nv_encoder)
nv_encoder = find_encoder_by_type(connector, OUTPUT_TV);
......@@ -687,8 +697,12 @@ nouveau_connector_create_lvds(struct drm_device *dev,
*/
if (!nv_connector->edid && !nv_connector->native_mode &&
!dev_priv->VBIOS.pub.fp_no_ddc) {
nv_connector->edid =
struct edid *edid =
(struct edid *)nouveau_bios_embedded_edid(dev);
if (edid) {
nv_connector->edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
*(nv_connector->edid) = *edid;
}
}
if (!nv_connector->edid)
......
......@@ -509,6 +509,8 @@ struct drm_nouveau_private {
void __iomem *ramin;
uint32_t ramin_size;
struct nouveau_bo *vga_ram;
struct workqueue_struct *wq;
struct work_struct irq_work;
......
......@@ -466,13 +466,14 @@ u_memcpya(uint64_t user, unsigned nmemb, unsigned size)
static int
nouveau_gem_pushbuf_reloc_apply(struct nouveau_channel *chan, int nr_bo,
struct drm_nouveau_gem_pushbuf_bo *bo,
int nr_relocs, uint64_t ptr_relocs,
int nr_dwords, int first_dword,
unsigned nr_relocs, uint64_t ptr_relocs,
unsigned nr_dwords, unsigned first_dword,
uint32_t *pushbuf, bool is_iomem)
{
struct drm_nouveau_gem_pushbuf_reloc *reloc = NULL;
struct drm_device *dev = chan->dev;
int ret = 0, i;
int ret = 0;
unsigned i;
reloc = u_memcpya(ptr_relocs, nr_relocs, sizeof(*reloc));
if (IS_ERR(reloc))
......@@ -667,6 +668,18 @@ nouveau_gem_ioctl_pushbuf_call(struct drm_device *dev, void *data,
}
pbbo = nouveau_gem_object(gem);
if ((req->offset & 3) || req->nr_dwords < 2 ||
(unsigned long)req->offset > (unsigned long)pbbo->bo.mem.size ||
(unsigned long)req->nr_dwords >
((unsigned long)(pbbo->bo.mem.size - req->offset ) >> 2)) {
NV_ERROR(dev, "pb call misaligned or out of bounds: "
"%d + %d * 4 > %ld\n",
req->offset, req->nr_dwords, pbbo->bo.mem.size);
ret = -EINVAL;
drm_gem_object_unreference(gem);
goto out;
}
ret = ttm_bo_reserve(&pbbo->bo, false, false, true,
chan->fence.sequence);
if (ret) {
......
......@@ -383,10 +383,10 @@ void nouveau_mem_close(struct drm_device *dev)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
if (dev_priv->ttm.bdev.man[TTM_PL_PRIV0].has_type)
ttm_bo_clean_mm(&dev_priv->ttm.bdev, TTM_PL_PRIV0);
ttm_bo_clean_mm(&dev_priv->ttm.bdev, TTM_PL_VRAM);
nouveau_bo_unpin(dev_priv->vga_ram);
nouveau_bo_ref(NULL, &dev_priv->vga_ram);
ttm_bo_clean_mm(&dev_priv->ttm.bdev, TTM_PL_VRAM);
ttm_bo_device_release(&dev_priv->ttm.bdev);
nouveau_ttm_global_release(dev_priv);
......@@ -622,6 +622,15 @@ nouveau_mem_init(struct drm_device *dev)
return ret;
}
ret = nouveau_bo_new(dev, NULL, 256*1024, 0, TTM_PL_FLAG_VRAM,
0, 0, true, true, &dev_priv->vga_ram);
if (ret == 0)
ret = nouveau_bo_pin(dev_priv->vga_ram, TTM_PL_FLAG_VRAM);
if (ret) {
NV_WARN(dev, "failed to reserve VGA memory\n");
nouveau_bo_ref(NULL, &dev_priv->vga_ram);
}
/* GART */
#if !defined(__powerpc__) && !defined(__ia64__)
if (drm_device_is_agp(dev) && dev->agp) {
......@@ -653,6 +662,7 @@ nouveau_mem_init(struct drm_device *dev)
dev_priv->fb_mtrr = drm_mtrr_add(drm_get_resource_start(dev, 1),
drm_get_resource_len(dev, 1),
DRM_MTRR_WC);
return 0;
}
......
......@@ -84,7 +84,7 @@ nv50_graph_init_regs__nv(struct drm_device *dev)
nv_wr32(dev, 0x400804, 0xc0000000);
nv_wr32(dev, 0x406800, 0xc0000000);
nv_wr32(dev, 0x400c04, 0xc0000000);
nv_wr32(dev, 0x401804, 0xc0000000);
nv_wr32(dev, 0x401800, 0xc0000000);
nv_wr32(dev, 0x405018, 0xc0000000);
nv_wr32(dev, 0x402000, 0xc0000000);
......@@ -282,6 +282,7 @@ nv50_graph_unload_context(struct drm_device *dev)
return 0;
inst &= NV50_PGRAPH_CTXCTL_CUR_INSTANCE;
nouveau_wait_for_idle(dev);
nv_wr32(dev, 0x400500, fifo & ~1);
nv_wr32(dev, 0x400784, inst);
nv_wr32(dev, 0x400824, nv_rd32(dev, 0x400824) | 0x20);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册