Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull more input updates from Dmitry Torokhov:
 "The second round of updates for the input subsystem.

  Updates to ALPS an bfin_roraty drivers and a couple oother fixups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: psmouse - use IS_ENABLED instead of homegrown code
  Input: bfin_rotary - introduce open and close methods
  Input: bfin_rotary - convert to use managed resources
  Input: bfin_rotary - use generic IO functions
  Input: bfin_rotary - move pin lists into into platform data
  Input: bfin_rotary - move platform header to linux/platform_data
  Input: bfin_rotary - mark suspend and resume code as __maybe_unused
  Input: bfin_rotary - fix potential oops in interrupt handler
  Input: ALPS - move v7 packet info to Documentation and v6 packet info
  Input: ALPS - fix confusing comment in protocol data
  Input: ALPS - do not mix trackstick and external PS/2 mouse data
  Input: ALPS - fix trackstick detection on some Dell Latitudes
  Input: ALPS - consolidate setting protocol parameters
  Input: ALPS - split protocol data from model info
  Input: ALPS - make Rushmore a separate protocol
  Input: ALPS - renumber protocol numbers
  Input: adi - remove an unnecessary check
  Input: pxa27x_keypad - remove an unneeded NULL check
  Input: soc_button_array - use "Windows" key for "Home"

Documentation/input/alps.txt

@@ -3,8 +3,8 @@ ALPS Touchpad Protocol
 
 Introduction
 ------------
-Currently the ALPS touchpad driver supports five protocol versions in use by
-ALPS touchpads, called versions 1, 2, 3, 4 and 5.
+Currently the ALPS touchpad driver supports seven protocol versions in use by
+ALPS touchpads, called versions 1, 2, 3, 4, 5, 6 and 7.
 
 Since roughly mid-2010 several new ALPS touchpads have been released and
 integrated into a variety of laptops and netbooks.  These new touchpads
@@ -240,3 +240,67 @@ For mt, the format is:
  byte 3:    0  x23  x22   x21 x20  x19  x18   x17
  byte 4:    0   x9   x8    x7  x6   x5   x4    x3
  byte 5:    0  x16  x15   x14 x13  x12  x11   x10
+
+ALPS Absolute Mode - Protocol Version 6
+---------------------------------------
+
+For trackstick packet, the format is:
+
+ byte 0:    1    1    1    1    1    1    1    1
+ byte 1:    0   X6   X5   X4   X3   X2   X1   X0
+ byte 2:    0   Y6   Y5   Y4   Y3   Y2   Y1   Y0
+ byte 3:    ?   Y7   X7    ?    ?    M    R    L
+ byte 4:   Z7   Z6   Z5   Z4   Z3   Z2   Z1   Z0
+ byte 5:    0    1    1    1    1    1    1    1
+
+For touchpad packet, the format is:
+
+ byte 0:    1    1    1    1    1    1    1    1
+ byte 1:    0    0    0    0   x3   x2   x1   x0
+ byte 2:    0    0    0    0   y3   y2   y1   y0
+ byte 3:    ?   x7   x6   x5   x4    ?    r    l
+ byte 4:    ?   y7   y6   y5   y4    ?    ?    ?
+ byte 5:   z7   z6   z5   z4   z3   z2   z1   z0
+
+(v6 touchpad does not have middle button)
+
+ALPS Absolute Mode - Protocol Version 7
+---------------------------------------
+
+For trackstick packet, the format is:
+
+ byte 0:    0    1    0    0    1    0    0    0
+ byte 1:    1    1    *    *    1    M    R    L
+ byte 2:   X7    1   X5   X4   X3   X2   X1   X0
+ byte 3:   Z6    1   Y6   X6    1   Y2   Y1   Y0
+ byte 4:   Y7    0   Y5   Y4   Y3    1    1    0
+ byte 5:  T&P    0   Z5   Z4   Z3   Z2   Z1   Z0
+
+For touchpad packet, the format is:
+
+         packet-fmt     b7     b6     b5     b4     b3     b2     b1     b0
+ byte 0: TWO & MULTI     L      1      R      M      1   Y0-2   Y0-1   Y0-0
+ byte 0: NEW             L      1   X1-5      1      1   Y0-2   Y0-1   Y0-0
+ byte 1:             Y0-10   Y0-9   Y0-8   Y0-7   Y0-6   Y0-5   Y0-4   Y0-3
+ byte 2:             X0-11      1  X0-10   X0-9   X0-8   X0-7   X0-6   X0-5
+ byte 3:             X1-11      1   X0-4   X0-3      1   X0-2   X0-1   X0-0
+ byte 4: TWO         X1-10    TWO   X1-9   X1-8   X1-7   X1-6   X1-5   X1-4
+ byte 4: MULTI       X1-10    TWO   X1-9   X1-8   X1-7   X1-6   Y1-5      1
+ byte 4: NEW         X1-10    TWO   X1-9   X1-8   X1-7   X1-6      0      0
+ byte 5: TWO & NEW   Y1-10      0   Y1-9   Y1-8   Y1-7   Y1-6   Y1-5   Y1-4
+ byte 5: MULTI       Y1-10      0   Y1-9   Y1-8   Y1-7   Y1-6    F-1    F-0
+
+ L:         Left button
+ R / M:     Non-clickpads: Right / Middle button
+            Clickpads: When > 2 fingers are down, and some fingers
+            are in the button area, then the 2 coordinates reported
+            are for fingers outside the button area and these report
+            extra fingers being present in the right / left button
+            area. Note these fingers are not added to the F field!
+            so if a TWO packet is received and R = 1 then there are
+            3 fingers down, etc.
+ TWO:       1: Two touches present, byte 0/4/5 are in TWO fmt
+            0: If byte 4 bit 0 is 1, then byte 0/4/5 are in MULTI fmt
+               otherwise byte 0 bit 4 must be set and byte 0/4/5 are
+               in NEW fmt
+ F:         Number of fingers - 3, 0 means 3 fingers, 1 means 4 ...

arch/blackfin/mach-bf527/boards/ad7160eval.c

@@ -666,7 +666,14 @@ static struct platform_device bfin_sport1_uart_device = {
 #endif
 
 #if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
-#include <asm/bfin_rotary.h>
+#include <linux/platform_data/bfin_rotary.h>
+
+static const u16 per_cnt[] = {
+	P_CNT_CUD,
+	P_CNT_CDG,
+	P_CNT_CZM,
+	0
+};
 
 static struct bfin_rotary_platform_data bfin_rotary_data = {
 	/*.rotary_up_key     = KEY_UP,*/
@@ -676,9 +683,15 @@ static struct bfin_rotary_platform_data bfin_rotary_data = {
 	.debounce	   = 10,	/* 0..17 */
 	.mode		   = ROT_QUAD_ENC | ROT_DEBE,
 	.pm_wakeup	   = 1,
+	.pin_list	   = per_cnt,
 };
 
 static struct resource bfin_rotary_resources[] = {
+	{
+		.start = CNT_CONFIG,
+		.end   = CNT_CONFIG + 0xff,
+		.flags = IORESOURCE_MEM,
+	},
 	{
 		.start = IRQ_CNT,
 		.end = IRQ_CNT,

arch/blackfin/mach-bf527/boards/ezkit.c

@@ -1092,7 +1092,14 @@ static struct platform_device bfin_device_gpiokeys = {
 #endif
 
 #if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
-#include <asm/bfin_rotary.h>
+#include <linux/platform_data/bfin_rotary.h>
+
+static const u16 per_cnt[] = {
+	P_CNT_CUD,
+	P_CNT_CDG,
+	P_CNT_CZM,
+	0
+};
 
 static struct bfin_rotary_platform_data bfin_rotary_data = {
 	/*.rotary_up_key     = KEY_UP,*/
@@ -1102,9 +1109,15 @@ static struct bfin_rotary_platform_data bfin_rotary_data = {
 	.debounce	   = 10,	/* 0..17 */
 	.mode		   = ROT_QUAD_ENC | ROT_DEBE,
 	.pm_wakeup	   = 1,
+	.pin_list	   = per_cnt,
 };
 
 static struct resource bfin_rotary_resources[] = {
+	{
+		.start = CNT_CONFIG,
+		.end   = CNT_CONFIG + 0xff,
+		.flags = IORESOURCE_MEM,
+	},
 	{
 		.start = IRQ_CNT,
 		.end = IRQ_CNT,

arch/blackfin/mach-bf548/boards/ezkit.c

@@ -159,7 +159,7 @@ static struct platform_device bf54x_kpad_device = {
 #endif
 
 #if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
-#include <asm/bfin_rotary.h>
+#include <linux/platform_data/bfin_rotary.h>
 
 static struct bfin_rotary_platform_data bfin_rotary_data = {
 	/*.rotary_up_key     = KEY_UP,*/
@@ -172,6 +172,11 @@ static struct bfin_rotary_platform_data bfin_rotary_data = {
 };
 
 static struct resource bfin_rotary_resources[] = {
+	{
+		.start = CNT_CONFIG,
+		.end   = CNT_CONFIG + 0xff,
+		.flags = IORESOURCE_MEM,
+	},
 	{
 		.start = IRQ_CNT,
 		.end = IRQ_CNT,

arch/blackfin/mach-bf609/boards/ezkit.c

@@ -75,7 +75,7 @@ static struct platform_device bfin_isp1760_device = {
 #endif
 
 #if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
-#include <asm/bfin_rotary.h>
+#include <linux/platform_data/bfin_rotary.h>
 
 static struct bfin_rotary_platform_data bfin_rotary_data = {
 	/*.rotary_up_key     = KEY_UP,*/
@@ -87,6 +87,11 @@ static struct bfin_rotary_platform_data bfin_rotary_data = {
 };
 
 static struct resource bfin_rotary_resources[] = {
+	{
+		.start = CNT_CONFIG,
+		.end   = CNT_CONFIG + 0xff,
+		.flags = IORESOURCE_MEM,
+	},
 	{
 		.start = IRQ_CNT,
 		.end = IRQ_CNT,

drivers/input/joystick/adi.c

@@ -535,7 +535,6 @@ static int adi_connect(struct gameport *gameport, struct gameport_driver *drv)
 		}
 	}
  fail2:	for (i = 0; i < 2; i++)
-		if (port->adi[i].dev)
 		input_free_device(port->adi[i].dev);
 	gameport_close(gameport);
  fail1:	gameport_set_drvdata(gameport, NULL);

drivers/input/keyboard/pxa27x_keypad.c

@@ -345,13 +345,11 @@ static int pxa27x_keypad_build_keycode(struct pxa27x_keypad *keypad)
 {
 	const struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
 	struct input_dev *input_dev = keypad->input_dev;
-	const struct matrix_keymap_data *keymap_data =
-				pdata ? pdata->matrix_keymap_data : NULL;
 	unsigned short keycode;
 	int i;
 	int error;
 
-	error = matrix_keypad_build_keymap(keymap_data, NULL,
+	error = matrix_keypad_build_keymap(pdata->matrix_keymap_data, NULL,
 					   pdata->matrix_key_rows,
 					   pdata->matrix_key_cols,
 					   keypad->keycodes, input_dev);

drivers/input/misc/bfin_rotary.c

@@ -7,29 +7,37 @@
 
 #include <linux/module.h>
 #include <linux/interrupt.h>
+#include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/pm.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
 #include <linux/slab.h>
+#include <linux/platform_data/bfin_rotary.h>
 
 #include <asm/portmux.h>
-#include <asm/bfin_rotary.h>
 
-static const u16 per_cnt[] = {
-	P_CNT_CUD,
-	P_CNT_CDG,
-	P_CNT_CZM,
-	0
-};
+#define CNT_CONFIG_OFF		0	/* CNT Config Offset */
+#define CNT_IMASK_OFF		4	/* CNT Interrupt Mask Offset */
+#define CNT_STATUS_OFF		8	/* CNT Status Offset */
+#define CNT_COMMAND_OFF		12	/* CNT Command Offset */
+#define CNT_DEBOUNCE_OFF	16	/* CNT Debounce Offset */
+#define CNT_COUNTER_OFF		20	/* CNT Counter Offset */
+#define CNT_MAX_OFF		24	/* CNT Maximum Count Offset */
+#define CNT_MIN_OFF		28	/* CNT Minimum Count Offset */
 
 struct bfin_rot {
 	struct input_dev *input;
+	void __iomem *base;
 	int irq;
 	unsigned int up_key;
 	unsigned int down_key;
 	unsigned int button_key;
 	unsigned int rel_code;
+
+	unsigned short mode;
+	unsigned short debounce;
+
 	unsigned short cnt_config;
 	unsigned short cnt_imask;
 	unsigned short cnt_debounce;
@@ -59,18 +67,17 @@ static void report_rotary_event(struct bfin_rot *rotary, int delta)
 
 static irqreturn_t bfin_rotary_isr(int irq, void *dev_id)
 {
-	struct platform_device *pdev = dev_id;
-	struct bfin_rot *rotary = platform_get_drvdata(pdev);
+	struct bfin_rot *rotary = dev_id;
 	int delta;
 
-	switch (bfin_read_CNT_STATUS()) {
+	switch (readw(rotary->base + CNT_STATUS_OFF)) {
 
 	case ICII:
 		break;
 
 	case UCII:
 	case DCII:
-		delta = bfin_read_CNT_COUNTER();
+		delta = readl(rotary->base + CNT_COUNTER_OFF);
 		if (delta)
 			report_rotary_event(rotary, delta);
 		break;
@@ -83,16 +90,52 @@ static irqreturn_t bfin_rotary_isr(int irq, void *dev_id)
 		break;
 	}
 
-	bfin_write_CNT_COMMAND(W1LCNT_ZERO);	/* Clear COUNTER */
-	bfin_write_CNT_STATUS(-1);	/* Clear STATUS */
+	writew(W1LCNT_ZERO, rotary->base + CNT_COMMAND_OFF); /* Clear COUNTER */
+	writew(-1, rotary->base + CNT_STATUS_OFF); /* Clear STATUS */
 
 	return IRQ_HANDLED;
 }
 
+static int bfin_rotary_open(struct input_dev *input)
+{
+	struct bfin_rot *rotary = input_get_drvdata(input);
+	unsigned short val;
+
+	if (rotary->mode & ROT_DEBE)
+		writew(rotary->debounce & DPRESCALE,
+			rotary->base + CNT_DEBOUNCE_OFF);
+
+	writew(rotary->mode & ~CNTE, rotary->base + CNT_CONFIG_OFF);
+
+	val = UCIE | DCIE;
+	if (rotary->button_key)
+		val |= CZMIE;
+	writew(val, rotary->base + CNT_IMASK_OFF);
+
+	writew(rotary->mode | CNTE, rotary->base + CNT_CONFIG_OFF);
+
+	return 0;
+}
+
+static void bfin_rotary_close(struct input_dev *input)
+{
+	struct bfin_rot *rotary = input_get_drvdata(input);
+
+	writew(0, rotary->base + CNT_CONFIG_OFF);
+	writew(0, rotary->base + CNT_IMASK_OFF);
+}
+
+static void bfin_rotary_free_action(void *data)
+{
+	peripheral_free_list(data);
+}
+
 static int bfin_rotary_probe(struct platform_device *pdev)
 {
-	struct bfin_rotary_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	struct device *dev = &pdev->dev;
+	const struct bfin_rotary_platform_data *pdata = dev_get_platdata(dev);
 	struct bfin_rot *rotary;
+	struct resource *res;
 	struct input_dev *input;
 	int error;
 
@@ -102,18 +145,37 @@ static int bfin_rotary_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	error = peripheral_request_list(per_cnt, dev_name(&pdev->dev));
+	if (pdata->pin_list) {
+		error = peripheral_request_list(pdata->pin_list,
+						dev_name(&pdev->dev));
 		if (error) {
-		dev_err(&pdev->dev, "requesting peripherals failed\n");
+			dev_err(dev, "requesting peripherals failed: %d\n",
+				error);
 			return error;
 		}
 
-	rotary = kzalloc(sizeof(struct bfin_rot), GFP_KERNEL);
-	input = input_allocate_device();
-	if (!rotary || !input) {
-		error = -ENOMEM;
-		goto out1;
+		error = devm_add_action(dev, bfin_rotary_free_action,
+					pdata->pin_list);
+		if (error) {
+			dev_err(dev, "setting cleanup action failed: %d\n",
+				error);
+			peripheral_free_list(pdata->pin_list);
+			return error;
 		}
+	}
+
+	rotary = devm_kzalloc(dev, sizeof(struct bfin_rot), GFP_KERNEL);
+	if (!rotary)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	rotary->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(rotary->base))
+		return PTR_ERR(rotary->base);
+
+	input = devm_input_allocate_device(dev);
+	if (!input)
+		return -ENOMEM;
 
 	rotary->input = input;
 
@@ -122,9 +184,8 @@ static int bfin_rotary_probe(struct platform_device *pdev)
 	rotary->button_key = pdata->rotary_button_key;
 	rotary->rel_code = pdata->rotary_rel_code;
 
-	error = rotary->irq = platform_get_irq(pdev, 0);
-	if (error < 0)
-		goto out1;
+	rotary->mode = pdata->mode;
+	rotary->debounce = pdata->debounce;
 
 	input->name = pdev->name;
 	input->phys = "bfin-rotary/input0";
@@ -137,6 +198,9 @@ static int bfin_rotary_probe(struct platform_device *pdev)
 	input->id.product = 0x0001;
 	input->id.version = 0x0100;
 
+	input->open = bfin_rotary_open;
+	input->close = bfin_rotary_close;
+
 	if (rotary->up_key) {
 		__set_bit(EV_KEY, input->evbit);
 		__set_bit(rotary->up_key, input->keybit);
@@ -151,75 +215,43 @@ static int bfin_rotary_probe(struct platform_device *pdev)
 		__set_bit(rotary->button_key, input->keybit);
 	}
 
-	error = request_irq(rotary->irq, bfin_rotary_isr,
-			    0, dev_name(&pdev->dev), pdev);
+	/* Quiesce the device before requesting irq */
+	bfin_rotary_close(input);
+
+	rotary->irq = platform_get_irq(pdev, 0);
+	if (rotary->irq < 0) {
+		dev_err(dev, "No rotary IRQ specified\n");
+		return -ENOENT;
+	}
+
+	error = devm_request_irq(dev, rotary->irq, bfin_rotary_isr,
+				 0, dev_name(dev), rotary);
 	if (error) {
-		dev_err(&pdev->dev,
-			"unable to claim irq %d; error %d\n",
+		dev_err(dev, "unable to claim irq %d; error %d\n",
 			rotary->irq, error);
-		goto out1;
+		return error;
 	}
 
 	error = input_register_device(input);
 	if (error) {
-		dev_err(&pdev->dev,
-			"unable to register input device (%d)\n", error);
-		goto out2;
+		dev_err(dev, "unable to register input device (%d)\n", error);
+		return error;
 	}
 
-	if (pdata->rotary_button_key)
-		bfin_write_CNT_IMASK(CZMIE);
-
-	if (pdata->mode & ROT_DEBE)
-		bfin_write_CNT_DEBOUNCE(pdata->debounce & DPRESCALE);
-
-	if (pdata->mode)
-		bfin_write_CNT_CONFIG(bfin_read_CNT_CONFIG() |
-					(pdata->mode & ~CNTE));
-
-	bfin_write_CNT_IMASK(bfin_read_CNT_IMASK() | UCIE | DCIE);
-	bfin_write_CNT_CONFIG(bfin_read_CNT_CONFIG() | CNTE);
-
 	platform_set_drvdata(pdev, rotary);
 	device_init_wakeup(&pdev->dev, 1);
 
-	return 0;
-
-out2:
-	free_irq(rotary->irq, pdev);
-out1:
-	input_free_device(input);
-	kfree(rotary);
-	peripheral_free_list(per_cnt);
-
-	return error;
-}
-
-static int bfin_rotary_remove(struct platform_device *pdev)
-{
-	struct bfin_rot *rotary = platform_get_drvdata(pdev);
-
-	bfin_write_CNT_CONFIG(0);
-	bfin_write_CNT_IMASK(0);
-
-	free_irq(rotary->irq, pdev);
-	input_unregister_device(rotary->input);
-	peripheral_free_list(per_cnt);
-
-	kfree(rotary);
-
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int bfin_rotary_suspend(struct device *dev)
+static int __maybe_unused bfin_rotary_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct bfin_rot *rotary = platform_get_drvdata(pdev);
 
-	rotary->cnt_config = bfin_read_CNT_CONFIG();
-	rotary->cnt_imask = bfin_read_CNT_IMASK();
-	rotary->cnt_debounce = bfin_read_CNT_DEBOUNCE();
+	rotary->cnt_config = readw(rotary->base + CNT_CONFIG_OFF);
+	rotary->cnt_imask = readw(rotary->base + CNT_IMASK_OFF);
+	rotary->cnt_debounce = readw(rotary->base + CNT_DEBOUNCE_OFF);
 
 	if (device_may_wakeup(&pdev->dev))
 		enable_irq_wake(rotary->irq);
@@ -227,38 +259,32 @@ static int bfin_rotary_suspend(struct device *dev)
 	return 0;
 }
 
-static int bfin_rotary_resume(struct device *dev)
+static int __maybe_unused bfin_rotary_resume(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct bfin_rot *rotary = platform_get_drvdata(pdev);
 
-	bfin_write_CNT_DEBOUNCE(rotary->cnt_debounce);
-	bfin_write_CNT_IMASK(rotary->cnt_imask);
-	bfin_write_CNT_CONFIG(rotary->cnt_config & ~CNTE);
+	writew(rotary->cnt_debounce, rotary->base + CNT_DEBOUNCE_OFF);
+	writew(rotary->cnt_imask, rotary->base + CNT_IMASK_OFF);
+	writew(rotary->cnt_config & ~CNTE, rotary->base + CNT_CONFIG_OFF);
 
 	if (device_may_wakeup(&pdev->dev))
 		disable_irq_wake(rotary->irq);
 
 	if (rotary->cnt_config & CNTE)
-		bfin_write_CNT_CONFIG(rotary->cnt_config);
+		writew(rotary->cnt_config, rotary->base + CNT_CONFIG_OFF);
 
 	return 0;
 }
 
-static const struct dev_pm_ops bfin_rotary_pm_ops = {
-	.suspend	= bfin_rotary_suspend,
-	.resume		= bfin_rotary_resume,
-};
-#endif
+static SIMPLE_DEV_PM_OPS(bfin_rotary_pm_ops,
+			 bfin_rotary_suspend, bfin_rotary_resume);
 
 static struct platform_driver bfin_rotary_device_driver = {
 	.probe		= bfin_rotary_probe,
-	.remove		= bfin_rotary_remove,
 	.driver		= {
 		.name	= "bfin-rotary",
-#ifdef CONFIG_PM
 		.pm	= &bfin_rotary_pm_ops,
-#endif
 	},
 };
 module_platform_driver(bfin_rotary_device_driver);

drivers/input/misc/soc_button_array.c

@@ -195,7 +195,7 @@ static int soc_button_probe(struct platform_device *pdev)
 
 static struct soc_button_info soc_button_PNP0C40[] = {
 	{ "power", 0, EV_KEY, KEY_POWER, false, true },
-	{ "home", 1, EV_KEY, KEY_HOME, false, true },
+	{ "home", 1, EV_KEY, KEY_LEFTMETA, false, true },
 	{ "volume_up", 2, EV_KEY, KEY_VOLUMEUP, true, false },
 	{ "volume_down", 3, EV_KEY, KEY_VOLUMEDOWN, true, false },
 	{ "rotation_lock", 4, EV_SW, SW_ROTATE_LOCK, false, false },

drivers/input/mouse/alps.c

@@ -99,36 +99,58 @@ static const struct alps_nibble_commands alps_v6_nibble_commands[] = {
 #define ALPS_FOUR_BUTTONS	0x40	/* 4 direction button present */
 #define ALPS_PS2_INTERLEAVED	0x80	/* 3-byte PS/2 packet interleaved with
 					   6-byte ALPS packet */
-#define ALPS_IS_RUSHMORE	0x100	/* device is a rushmore */
 #define ALPS_BUTTONPAD		0x200	/* device is a clickpad */
 
 static const struct alps_model_info alps_model_data[] = {
-	{ { 0x32, 0x02, 0x14 },	0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT },	/* Toshiba Salellite Pro M10 */
-	{ { 0x33, 0x02, 0x0a },	0x00, ALPS_PROTO_V1, 0x88, 0xf8, 0 },				/* UMAX-530T */
-	{ { 0x53, 0x02, 0x0a },	0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 },
-	{ { 0x53, 0x02, 0x14 },	0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 },
-	{ { 0x60, 0x03, 0xc8 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 },				/* HP ze1115 */
-	{ { 0x63, 0x02, 0x0a },	0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 },
-	{ { 0x63, 0x02, 0x14 },	0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 },
-	{ { 0x63, 0x02, 0x28 },	0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_FW_BK_2 },		/* Fujitsu Siemens S6010 */
-	{ { 0x63, 0x02, 0x3c },	0x00, ALPS_PROTO_V2, 0x8f, 0x8f, ALPS_WHEEL },			/* Toshiba Satellite S2400-103 */
-	{ { 0x63, 0x02, 0x50 },	0x00, ALPS_PROTO_V2, 0xef, 0xef, ALPS_FW_BK_1 },		/* NEC Versa L320 */
-	{ { 0x63, 0x02, 0x64 },	0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 },
-	{ { 0x63, 0x03, 0xc8 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT },	/* Dell Latitude D800 */
-	{ { 0x73, 0x00, 0x0a },	0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_DUALPOINT },		/* ThinkPad R61 8918-5QG */
-	{ { 0x73, 0x02, 0x0a },	0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 },
-	{ { 0x73, 0x02, 0x14 },	0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_FW_BK_2 },		/* Ahtec Laptop */
-	{ { 0x20, 0x02, 0x0e },	0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT },	/* XXX */
-	{ { 0x22, 0x02, 0x0a },	0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT },
-	{ { 0x22, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xff, 0xff, ALPS_PASS | ALPS_DUALPOINT },	/* Dell Latitude D600 */
+	{ { 0x32, 0x02, 0x14 }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT } },	/* Toshiba Salellite Pro M10 */
+	{ { 0x33, 0x02, 0x0a }, 0x00, { ALPS_PROTO_V1, 0x88, 0xf8, 0 } },				/* UMAX-530T */
+	{ { 0x53, 0x02, 0x0a }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } },
+	{ { 0x53, 0x02, 0x14 }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } },
+	{ { 0x60, 0x03, 0xc8 }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } },				/* HP ze1115 */
+	{ { 0x63, 0x02, 0x0a }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } },
+	{ { 0x63, 0x02, 0x14 }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } },
+	{ { 0x63, 0x02, 0x28 }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_FW_BK_2 } },		/* Fujitsu Siemens S6010 */
+	{ { 0x63, 0x02, 0x3c }, 0x00, { ALPS_PROTO_V2, 0x8f, 0x8f, ALPS_WHEEL } },		/* Toshiba Satellite S2400-103 */
+	{ { 0x63, 0x02, 0x50 }, 0x00, { ALPS_PROTO_V2, 0xef, 0xef, ALPS_FW_BK_1 } },		/* NEC Versa L320 */
+	{ { 0x63, 0x02, 0x64 }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } },
+	{ { 0x63, 0x03, 0xc8 }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT } },	/* Dell Latitude D800 */
+	{ { 0x73, 0x00, 0x0a }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_DUALPOINT } },		/* ThinkPad R61 8918-5QG */
+	{ { 0x73, 0x02, 0x0a }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } },
+	{ { 0x73, 0x02, 0x14 }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_FW_BK_2 } },		/* Ahtec Laptop */
+
+	/*
+	 * XXX This entry is suspicious. First byte has zero lower nibble,
+	 * which is what a normal mouse would report. Also, the value 0x0e
+	 * isn't valid per PS/2 spec.
+	 */
+	{ { 0x20, 0x02, 0x0e }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT } },
+
+	{ { 0x22, 0x02, 0x0a }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT } },
+	{ { 0x22, 0x02, 0x14 }, 0x00, { ALPS_PROTO_V2, 0xff, 0xff, ALPS_PASS | ALPS_DUALPOINT } },	/* Dell Latitude D600 */
 	/* Dell Latitude E5500, E6400, E6500, Precision M4400 */
-	{ { 0x62, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf,
-		ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED },
-	{ { 0x73, 0x00, 0x14 }, 0x00, ALPS_PROTO_V6, 0xff, 0xff, ALPS_DUALPOINT },		/* Dell XT2 */
-	{ { 0x73, 0x02, 0x50 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf, ALPS_FOUR_BUTTONS },		/* Dell Vostro 1400 */
-	{ { 0x52, 0x01, 0x14 }, 0x00, ALPS_PROTO_V2, 0xff, 0xff,
-		ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED },				/* Toshiba Tecra A11-11L */
-	{ { 0x73, 0x02, 0x64 },	0x8a, ALPS_PROTO_V4, 0x8f, 0x8f, 0 },
+	{ { 0x62, 0x02, 0x14 }, 0x00, { ALPS_PROTO_V2, 0xcf, 0xcf,
+		ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED } },
+	{ { 0x73, 0x00, 0x14 }, 0x00, { ALPS_PROTO_V6, 0xff, 0xff, ALPS_DUALPOINT } },		/* Dell XT2 */
+	{ { 0x73, 0x02, 0x50 }, 0x00, { ALPS_PROTO_V2, 0xcf, 0xcf, ALPS_FOUR_BUTTONS } },	/* Dell Vostro 1400 */
+	{ { 0x52, 0x01, 0x14 }, 0x00, { ALPS_PROTO_V2, 0xff, 0xff,
+		ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED } },				/* Toshiba Tecra A11-11L */
+	{ { 0x73, 0x02, 0x64 }, 0x8a, { ALPS_PROTO_V4, 0x8f, 0x8f, 0 } },
+};
+
+static const struct alps_protocol_info alps_v3_protocol_data = {
+	ALPS_PROTO_V3, 0x8f, 0x8f, ALPS_DUALPOINT
+};
+
+static const struct alps_protocol_info alps_v3_rushmore_data = {
+	ALPS_PROTO_V3_RUSHMORE, 0x8f, 0x8f, ALPS_DUALPOINT
+};
+
+static const struct alps_protocol_info alps_v5_protocol_data = {
+	ALPS_PROTO_V5, 0xc8, 0xd8, 0
+};
+
+static const struct alps_protocol_info alps_v7_protocol_data = {
+	ALPS_PROTO_V7, 0x48, 0x48, ALPS_DUALPOINT
 };
 
 static void alps_set_abs_params_st(struct alps_data *priv,
@@ -136,12 +158,6 @@ static void alps_set_abs_params_st(struct alps_data *priv,
 static void alps_set_abs_params_mt(struct alps_data *priv,
 				   struct input_dev *dev1);
 
-/*
- * XXX - this entry is suspicious. First byte has zero lower nibble,
- * which is what a normal mouse would report. Also, the value 0x0e
- * isn't valid per PS/2 spec.
- */
-
 /* Packet formats are described in Documentation/input/alps.txt */
 
 static bool alps_is_valid_first_byte(struct alps_data *priv,
@@ -150,8 +166,7 @@ static bool alps_is_valid_first_byte(struct alps_data *priv,
 	return (data & priv->mask0) == priv->byte0;
 }
 
-static void alps_report_buttons(struct psmouse *psmouse,
-				struct input_dev *dev1, struct input_dev *dev2,
+static void alps_report_buttons(struct input_dev *dev1, struct input_dev *dev2,
 				int left, int right, int middle)
 {
 	struct input_dev *dev;
@@ -161,19 +176,20 @@ static void alps_report_buttons(struct psmouse *psmouse,
 	 * other device (dev2) then this event should be also
 	 * sent through that device.
 	 */
-	dev = test_bit(BTN_LEFT, dev2->key) ? dev2 : dev1;
+	dev = (dev2 && test_bit(BTN_LEFT, dev2->key)) ? dev2 : dev1;
 	input_report_key(dev, BTN_LEFT, left);
 
-	dev = test_bit(BTN_RIGHT, dev2->key) ? dev2 : dev1;
+	dev = (dev2 && test_bit(BTN_RIGHT, dev2->key)) ? dev2 : dev1;
 	input_report_key(dev, BTN_RIGHT, right);
 
-	dev = test_bit(BTN_MIDDLE, dev2->key) ? dev2 : dev1;
+	dev = (dev2 && test_bit(BTN_MIDDLE, dev2->key)) ? dev2 : dev1;
 	input_report_key(dev, BTN_MIDDLE, middle);
 
 	/*
 	 * Sync the _other_ device now, we'll do the first
 	 * device later once we report the rest of the events.
 	 */
+	if (dev2)
 		input_sync(dev2);
 }
 
@@ -221,13 +237,13 @@ static void alps_process_packet_v1_v2(struct psmouse *psmouse)
 		input_report_rel(dev2, REL_X,  (x > 383 ? (x - 768) : x));
 		input_report_rel(dev2, REL_Y, -(y > 255 ? (y - 512) : y));
 
-		alps_report_buttons(psmouse, dev2, dev, left, right, middle);
+		alps_report_buttons(dev2, dev, left, right, middle);
 
 		input_sync(dev2);
 		return;
 	}
 
-	alps_report_buttons(psmouse, dev, dev2, left, right, middle);
+	alps_report_buttons(dev, dev2, left, right, middle);
 
 	/* Convert hardware tap to a reasonable Z value */
 	if (ges && !fin)
@@ -412,7 +428,7 @@ static int alps_process_bitmap(struct alps_data *priv,
 		(2 * (priv->y_bits - 1));
 
 	/* y-bitmap order is reversed, except on rushmore */
-	if (!(priv->flags & ALPS_IS_RUSHMORE)) {
+	if (priv->proto_version != ALPS_PROTO_V3_RUSHMORE) {
 		fields->mt[0].y = priv->y_max - fields->mt[0].y;
 		fields->mt[1].y = priv->y_max - fields->mt[1].y;
 	}
@@ -648,7 +664,8 @@ static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse)
 		 */
 		if (f->is_mp) {
 			fingers = f->fingers;
-			if (priv->proto_version == ALPS_PROTO_V3) {
+			if (priv->proto_version == ALPS_PROTO_V3 ||
+			    priv->proto_version == ALPS_PROTO_V3_RUSHMORE) {
 				if (alps_process_bitmap(priv, f) == 0)
 					fingers = 0; /* Use st data */
 
@@ -892,34 +909,6 @@ static void alps_get_finger_coordinate_v7(struct input_mt_pos *mt,
 					  unsigned char *pkt,
 					  unsigned char pkt_id)
 {
-	/*
-	 *       packet-fmt    b7   b6    b5   b4   b3   b2   b1   b0
-	 * Byte0 TWO & MULTI    L    1     R    M    1 Y0-2 Y0-1 Y0-0
-	 * Byte0 NEW            L    1  X1-5    1    1 Y0-2 Y0-1 Y0-0
-	 * Byte1            Y0-10 Y0-9  Y0-8 Y0-7 Y0-6 Y0-5 Y0-4 Y0-3
-	 * Byte2            X0-11    1 X0-10 X0-9 X0-8 X0-7 X0-6 X0-5
-	 * Byte3            X1-11    1  X0-4 X0-3    1 X0-2 X0-1 X0-0
-	 * Byte4 TWO        X1-10  TWO  X1-9 X1-8 X1-7 X1-6 X1-5 X1-4
-	 * Byte4 MULTI      X1-10  TWO  X1-9 X1-8 X1-7 X1-6 Y1-5    1
-	 * Byte4 NEW        X1-10  TWO  X1-9 X1-8 X1-7 X1-6    0    0
-	 * Byte5 TWO & NEW  Y1-10    0  Y1-9 Y1-8 Y1-7 Y1-6 Y1-5 Y1-4
-	 * Byte5 MULTI      Y1-10    0  Y1-9 Y1-8 Y1-7 Y1-6  F-1  F-0
-	 * L:         Left button
-	 * R / M:     Non-clickpads: Right / Middle button
-	 *            Clickpads: When > 2 fingers are down, and some fingers
-	 *            are in the button area, then the 2 coordinates reported
-	 *            are for fingers outside the button area and these report
-	 *            extra fingers being present in the right / left button
-	 *            area. Note these fingers are not added to the F field!
-	 *            so if a TWO packet is received and R = 1 then there are
-	 *            3 fingers down, etc.
-	 * TWO:       1: Two touches present, byte 0/4/5 are in TWO fmt
-	 *            0: If byte 4 bit 0 is 1, then byte 0/4/5 are in MULTI fmt
-	 *               otherwise byte 0 bit 4 must be set and byte 0/4/5 are
-	 *               in NEW fmt
-	 * F:         Number of fingers - 3, 0 means 3 fingers, 1 means 4 ...
-	 */
-
 	mt[0].x = ((pkt[2] & 0x80) << 4);
 	mt[0].x |= ((pkt[2] & 0x3F) << 5);
 	mt[0].x |= ((pkt[3] & 0x30) >> 1);
@@ -1044,17 +1033,6 @@ static void alps_process_trackstick_packet_v7(struct psmouse *psmouse)
 		return;
 	}
 
-	/*
-	 *        b7 b6 b5 b4 b3 b2 b1 b0
-	 * Byte0   0  1  0  0  1  0  0  0
-	 * Byte1   1  1  *  *  1  M  R  L
-	 * Byte2  X7  1 X5 X4 X3 X2 X1 X0
-	 * Byte3  Z6  1 Y6 X6  1 Y2 Y1 Y0
-	 * Byte4  Y7  0 Y5 Y4 Y3  1  1  0
-	 * Byte5 T&P  0 Z5 Z4 Z3 Z2 Z1 Z0
-	 * M / R / L: Middle / Right / Left button
-	 */
-
 	x = ((packet[2] & 0xbf)) | ((packet[3] & 0x10) << 2);
 	y = (packet[3] & 0x07) | (packet[4] & 0xb8) |
 	    ((packet[3] & 0x20) << 1);
@@ -1107,23 +1085,89 @@ static void alps_process_packet_v7(struct psmouse *psmouse)
 		alps_process_touchpad_packet_v7(psmouse);
 }
 
-static void alps_report_bare_ps2_packet(struct psmouse *psmouse,
+static DEFINE_MUTEX(alps_mutex);
+
+static void alps_register_bare_ps2_mouse(struct work_struct *work)
+{
+	struct alps_data *priv =
+		container_of(work, struct alps_data, dev3_register_work.work);
+	struct psmouse *psmouse = priv->psmouse;
+	struct input_dev *dev3;
+	int error = 0;
+
+	mutex_lock(&alps_mutex);
+
+	if (priv->dev3)
+		goto out;
+
+	dev3 = input_allocate_device();
+	if (!dev3) {
+		psmouse_err(psmouse, "failed to allocate secondary device\n");
+		error = -ENOMEM;
+		goto out;
+	}
+
+	snprintf(priv->phys3, sizeof(priv->phys3), "%s/%s",
+		 psmouse->ps2dev.serio->phys,
+		 (priv->dev2 ? "input2" : "input1"));
+	dev3->phys = priv->phys3;
+
+	/*
+	 * format of input device name is: "protocol vendor name"
+	 * see function psmouse_switch_protocol() in psmouse-base.c
+	 */
+	dev3->name = "PS/2 ALPS Mouse";
+
+	dev3->id.bustype = BUS_I8042;
+	dev3->id.vendor  = 0x0002;
+	dev3->id.product = PSMOUSE_PS2;
+	dev3->id.version = 0x0000;
+	dev3->dev.parent = &psmouse->ps2dev.serio->dev;
+
+	input_set_capability(dev3, EV_REL, REL_X);
+	input_set_capability(dev3, EV_REL, REL_Y);
+	input_set_capability(dev3, EV_KEY, BTN_LEFT);
+	input_set_capability(dev3, EV_KEY, BTN_RIGHT);
+	input_set_capability(dev3, EV_KEY, BTN_MIDDLE);
+
+	__set_bit(INPUT_PROP_POINTER, dev3->propbit);
+
+	error = input_register_device(dev3);
+	if (error) {
+		psmouse_err(psmouse,
+			    "failed to register secondary device: %d\n",
+			    error);
+		input_free_device(dev3);
+		goto out;
+	}
+
+	priv->dev3 = dev3;
+
+out:
+	/*
+	 * Save the error code so that we can detect that we
+	 * already tried to create the device.
+	 */
+	if (error)
+		priv->dev3 = ERR_PTR(error);
+
+	mutex_unlock(&alps_mutex);
+}
+
+static void alps_report_bare_ps2_packet(struct input_dev *dev,
 					unsigned char packet[],
 					bool report_buttons)
 {
-	struct alps_data *priv = psmouse->private;
-	struct input_dev *dev2 = priv->dev2;
-
 	if (report_buttons)
-		alps_report_buttons(psmouse, dev2, psmouse->dev,
+		alps_report_buttons(dev, NULL,
 				packet[0] & 1, packet[0] & 2, packet[0] & 4);
 
-	input_report_rel(dev2, REL_X,
+	input_report_rel(dev, REL_X,
 		packet[1] ? packet[1] - ((packet[0] << 4) & 0x100) : 0);
-	input_report_rel(dev2, REL_Y,
+	input_report_rel(dev, REL_Y,
 		packet[2] ? ((packet[0] << 3) & 0x100) - packet[2] : 0);
 
-	input_sync(dev2);
+	input_sync(dev);
 }
 
 static psmouse_ret_t alps_handle_interleaved_ps2(struct psmouse *psmouse)
@@ -1188,8 +1232,8 @@ static psmouse_ret_t alps_handle_interleaved_ps2(struct psmouse *psmouse)
 		 * de-synchronization.
 		 */
 
-		alps_report_bare_ps2_packet(psmouse, &psmouse->packet[3],
-					    false);
+		alps_report_bare_ps2_packet(priv->dev2,
+					    &psmouse->packet[3], false);
 
 		/*
 		 * Continue with the standard ALPS protocol handling,
@@ -1245,8 +1289,17 @@ static psmouse_ret_t alps_process_byte(struct psmouse *psmouse)
 	 * properly we only do this if the device is fully synchronized.
 	 */
 	if (!psmouse->out_of_sync_cnt && (psmouse->packet[0] & 0xc8) == 0x08) {
+
+		/* Register dev3 mouse if we received PS/2 packet first time */
+		if (unlikely(!priv->dev3))
+			psmouse_queue_work(psmouse,
+					   &priv->dev3_register_work, 0);
+
 		if (psmouse->pktcnt == 3) {
-			alps_report_bare_ps2_packet(psmouse, psmouse->packet,
+			/* Once dev3 mouse device is registered report data */
+			if (likely(!IS_ERR_OR_NULL(priv->dev3)))
+				alps_report_bare_ps2_packet(priv->dev3,
+							    psmouse->packet,
 							    true);
 			return PSMOUSE_FULL_PACKET;
 		}
@@ -1275,7 +1328,7 @@ static psmouse_ret_t alps_process_byte(struct psmouse *psmouse)
 			    psmouse->pktcnt - 1,
 			    psmouse->packet[psmouse->pktcnt - 1]);
 
-		if (priv->proto_version == ALPS_PROTO_V3 &&
+		if (priv->proto_version == ALPS_PROTO_V3_RUSHMORE &&
 		    psmouse->pktcnt == psmouse->pktsize) {
 			/*
 			 * Some Dell boxes, such as Latitude E6440 or E7440
@@ -1780,7 +1833,7 @@ static int alps_setup_trackstick_v3(struct psmouse *psmouse, int reg_base)
 	 * all.
 	 */
 	if (alps_rpt_cmd(psmouse, 0, PSMOUSE_CMD_SETSCALE21, param)) {
-		psmouse_warn(psmouse, "trackstick E7 report failed\n");
+		psmouse_warn(psmouse, "Failed to initialize trackstick (E7 report failed)\n");
 		ret = -ENODEV;
 	} else {
 		psmouse_dbg(psmouse, "trackstick E7 report: %3ph\n", param);
@@ -1945,8 +1998,6 @@ static int alps_hw_init_rushmore_v3(struct psmouse *psmouse)
 						   ALPS_REG_BASE_RUSHMORE);
 		if (reg_val == -EIO)
 			goto error;
-		if (reg_val == -ENODEV)
-			priv->flags &= ~ALPS_DUALPOINT;
 	}
 
 	if (alps_enter_command_mode(psmouse) ||
@@ -2162,11 +2213,18 @@ static int alps_hw_init_v7(struct psmouse *psmouse)
 	return ret;
 }
 
-static void alps_set_defaults(struct alps_data *priv)
+static int alps_set_protocol(struct psmouse *psmouse,
+			     struct alps_data *priv,
+			     const struct alps_protocol_info *protocol)
 {
-	priv->byte0 = 0x8f;
-	priv->mask0 = 0x8f;
-	priv->flags = ALPS_DUALPOINT;
+	psmouse->private = priv;
+
+	setup_timer(&priv->timer, alps_flush_packet, (unsigned long)psmouse);
+
+	priv->proto_version = protocol->version;
+	priv->byte0 = protocol->byte0;
+	priv->mask0 = protocol->mask0;
+	priv->flags = protocol->flags;
 
 	priv->x_max = 2000;
 	priv->y_max = 1400;
@@ -2182,6 +2240,7 @@ static void alps_set_defaults(struct alps_data *priv)
 		priv->x_max = 1023;
 		priv->y_max = 767;
 		break;
+
 	case ALPS_PROTO_V3:
 		priv->hw_init = alps_hw_init_v3;
 		priv->process_packet = alps_process_packet_v3;
@@ -2190,6 +2249,23 @@ static void alps_set_defaults(struct alps_data *priv)
 		priv->nibble_commands = alps_v3_nibble_commands;
 		priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
 		break;
+
+	case ALPS_PROTO_V3_RUSHMORE:
+		priv->hw_init = alps_hw_init_rushmore_v3;
+		priv->process_packet = alps_process_packet_v3;
+		priv->set_abs_params = alps_set_abs_params_mt;
+		priv->decode_fields = alps_decode_rushmore;
+		priv->nibble_commands = alps_v3_nibble_commands;
+		priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
+		priv->x_bits = 16;
+		priv->y_bits = 12;
+
+		if (alps_probe_trackstick_v3(psmouse,
+					     ALPS_REG_BASE_RUSHMORE) < 0)
+			priv->flags &= ~ALPS_DUALPOINT;
+
+		break;
+
 	case ALPS_PROTO_V4:
 		priv->hw_init = alps_hw_init_v4;
 		priv->process_packet = alps_process_packet_v4;
@@ -2197,6 +2273,7 @@ static void alps_set_defaults(struct alps_data *priv)
 		priv->nibble_commands = alps_v4_nibble_commands;
 		priv->addr_command = PSMOUSE_CMD_DISABLE;
 		break;
+
 	case ALPS_PROTO_V5:
 		priv->hw_init = alps_hw_init_dolphin_v1;
 		priv->process_packet = alps_process_touchpad_packet_v3_v5;
@@ -2204,14 +2281,12 @@ static void alps_set_defaults(struct alps_data *priv)
 		priv->set_abs_params = alps_set_abs_params_mt;
 		priv->nibble_commands = alps_v3_nibble_commands;
 		priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
-		priv->byte0 = 0xc8;
-		priv->mask0 = 0xd8;
-		priv->flags = 0;
 		priv->x_max = 1360;
 		priv->y_max = 660;
 		priv->x_bits = 23;
 		priv->y_bits = 12;
 		break;
+
 	case ALPS_PROTO_V6:
 		priv->hw_init = alps_hw_init_v6;
 		priv->process_packet = alps_process_packet_v6;
@@ -2220,6 +2295,7 @@ static void alps_set_defaults(struct alps_data *priv)
 		priv->x_max = 2047;
 		priv->y_max = 1535;
 		break;
+
 	case ALPS_PROTO_V7:
 		priv->hw_init = alps_hw_init_v7;
 		priv->process_packet = alps_process_packet_v7;
@@ -2227,19 +2303,21 @@ static void alps_set_defaults(struct alps_data *priv)
 		priv->set_abs_params = alps_set_abs_params_mt;
 		priv->nibble_commands = alps_v3_nibble_commands;
 		priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
-		priv->x_max = 0xfff;
-		priv->y_max = 0x7ff;
-		priv->byte0 = 0x48;
-		priv->mask0 = 0x48;
+
+		if (alps_dolphin_get_device_area(psmouse, priv))
+			return -EIO;
 
 		if (priv->fw_ver[1] != 0xba)
 			priv->flags |= ALPS_BUTTONPAD;
+
 		break;
 	}
+
+	return 0;
 }
 
-static int alps_match_table(struct psmouse *psmouse, struct alps_data *priv,
-			    unsigned char *e7, unsigned char *ec)
+static const struct alps_protocol_info *alps_match_table(unsigned char *e7,
+							 unsigned char *ec)
 {
 	const struct alps_model_info *model;
 	int i;
@@ -2251,23 +2329,18 @@ static int alps_match_table(struct psmouse *psmouse, struct alps_data *priv,
 		    (!model->command_mode_resp ||
 		     model->command_mode_resp == ec[2])) {
 
-			priv->proto_version = model->proto_version;
-			alps_set_defaults(priv);
-
-			priv->flags = model->flags;
-			priv->byte0 = model->byte0;
-			priv->mask0 = model->mask0;
-
-			return 0;
+			return &model->protocol_info;
 		}
 	}
 
-	return -EINVAL;
+	return NULL;
 }
 
 static int alps_identify(struct psmouse *psmouse, struct alps_data *priv)
 {
+	const struct alps_protocol_info *protocol;
 	unsigned char e6[4], e7[4], ec[4];
+	int error;
 
 	/*
 	 * First try "E6 report".
@@ -2293,54 +2366,35 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv)
 	    alps_exit_command_mode(psmouse))
 		return -EIO;
 
-	/* Save the Firmware version */
-	memcpy(priv->fw_ver, ec, 3);
-
-	if (alps_match_table(psmouse, priv, e7, ec) == 0) {
-		return 0;
-	} else if (e7[0] == 0x73 && e7[1] == 0x03 && e7[2] == 0x50 &&
+	protocol = alps_match_table(e7, ec);
+	if (!protocol) {
+		if (e7[0] == 0x73 && e7[1] == 0x03 && e7[2] == 0x50 &&
 			   ec[0] == 0x73 && (ec[1] == 0x01 || ec[1] == 0x02)) {
-		priv->proto_version = ALPS_PROTO_V5;
-		alps_set_defaults(priv);
-		if (alps_dolphin_get_device_area(psmouse, priv))
-			return -EIO;
-		else
-			return 0;
+			protocol = &alps_v5_protocol_data;
 		} else if (ec[0] == 0x88 &&
 			   ((ec[1] & 0xf0) == 0xb0 || (ec[1] & 0xf0) == 0xc0)) {
-		priv->proto_version = ALPS_PROTO_V7;
-		alps_set_defaults(priv);
-
-		return 0;
+			protocol = &alps_v7_protocol_data;
 		} else if (ec[0] == 0x88 && ec[1] == 0x08) {
-		priv->proto_version = ALPS_PROTO_V3;
-		alps_set_defaults(priv);
-
-		priv->hw_init = alps_hw_init_rushmore_v3;
-		priv->decode_fields = alps_decode_rushmore;
-		priv->x_bits = 16;
-		priv->y_bits = 12;
-		priv->flags |= ALPS_IS_RUSHMORE;
-
-		/* hack to make addr_command, nibble_command available */
-		psmouse->private = priv;
-
-		if (alps_probe_trackstick_v3(psmouse, ALPS_REG_BASE_RUSHMORE))
-			priv->flags &= ~ALPS_DUALPOINT;
-
-		return 0;
+			protocol = &alps_v3_rushmore_data;
 		} else if (ec[0] == 0x88 && ec[1] == 0x07 &&
 			   ec[2] >= 0x90 && ec[2] <= 0x9d) {
-		priv->proto_version = ALPS_PROTO_V3;
-		alps_set_defaults(priv);
-
-		return 0;
-	}
-
+			protocol = &alps_v3_protocol_data;
+		} else {
 			psmouse_dbg(psmouse,
 				    "Likely not an ALPS touchpad: E7=%3ph, EC=%3ph\n", e7, ec);
-
 			return -EINVAL;
+		}
+	}
+
+	if (priv) {
+		/* Save the Firmware version */
+		memcpy(priv->fw_ver, ec, 3);
+		error = alps_set_protocol(psmouse, priv, protocol);
+		if (error)
+			return error;
+	}
+
+	return 0;
 }
 
 static int alps_reconnect(struct psmouse *psmouse)
@@ -2361,7 +2415,10 @@ static void alps_disconnect(struct psmouse *psmouse)
 
 	psmouse_reset(psmouse);
 	del_timer_sync(&priv->timer);
+	if (priv->dev2)
 		input_unregister_device(priv->dev2);
+	if (!IS_ERR_OR_NULL(priv->dev3))
+		input_unregister_device(priv->dev3);
 	kfree(priv);
 }
 
@@ -2394,25 +2451,12 @@ static void alps_set_abs_params_mt(struct alps_data *priv,
 
 int alps_init(struct psmouse *psmouse)
 {
-	struct alps_data *priv;
-	struct input_dev *dev1 = psmouse->dev, *dev2;
-
-	priv = kzalloc(sizeof(struct alps_data), GFP_KERNEL);
-	dev2 = input_allocate_device();
-	if (!priv || !dev2)
-		goto init_fail;
-
-	priv->dev2 = dev2;
-	setup_timer(&priv->timer, alps_flush_packet, (unsigned long)psmouse);
-
-	psmouse->private = priv;
-
-	psmouse_reset(psmouse);
-
-	if (alps_identify(psmouse, priv) < 0)
-		goto init_fail;
+	struct alps_data *priv = psmouse->private;
+	struct input_dev *dev1 = psmouse->dev;
+	int error;
 
-	if (priv->hw_init(psmouse))
+	error = priv->hw_init(psmouse);
+	if (error)
 		goto init_fail;
 
 	/*
@@ -2462,36 +2506,57 @@ int alps_init(struct psmouse *psmouse)
 	}
 
 	if (priv->flags & ALPS_DUALPOINT) {
+		struct input_dev *dev2;
+
+		dev2 = input_allocate_device();
+		if (!dev2) {
+			psmouse_err(psmouse,
+				    "failed to allocate trackstick device\n");
+			error = -ENOMEM;
+			goto init_fail;
+		}
+
+		snprintf(priv->phys2, sizeof(priv->phys2), "%s/input1",
+			 psmouse->ps2dev.serio->phys);
+		dev2->phys = priv->phys2;
+
 		/*
 		 * format of input device name is: "protocol vendor name"
 		 * see function psmouse_switch_protocol() in psmouse-base.c
 		 */
 		dev2->name = "AlpsPS/2 ALPS DualPoint Stick";
-		dev2->id.product = PSMOUSE_ALPS;
-		dev2->id.version = priv->proto_version;
-	} else {
-		dev2->name = "PS/2 ALPS Mouse";
-		dev2->id.product = PSMOUSE_PS2;
-		dev2->id.version = 0x0000;
-	}
 
-	snprintf(priv->phys, sizeof(priv->phys), "%s/input1", psmouse->ps2dev.serio->phys);
-	dev2->phys = priv->phys;
 		dev2->id.bustype = BUS_I8042;
 		dev2->id.vendor  = 0x0002;
+		dev2->id.product = PSMOUSE_ALPS;
+		dev2->id.version = priv->proto_version;
 		dev2->dev.parent = &psmouse->ps2dev.serio->dev;
 
-	dev2->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
-	dev2->relbit[BIT_WORD(REL_X)] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
-	dev2->keybit[BIT_WORD(BTN_LEFT)] =
-		BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT);
+		input_set_capability(dev2, EV_REL, REL_X);
+		input_set_capability(dev2, EV_REL, REL_Y);
+		input_set_capability(dev2, EV_KEY, BTN_LEFT);
+		input_set_capability(dev2, EV_KEY, BTN_RIGHT);
+		input_set_capability(dev2, EV_KEY, BTN_MIDDLE);
 
 		__set_bit(INPUT_PROP_POINTER, dev2->propbit);
-	if (priv->flags & ALPS_DUALPOINT)
 		__set_bit(INPUT_PROP_POINTING_STICK, dev2->propbit);
 
-	if (input_register_device(priv->dev2))
+		error = input_register_device(dev2);
+		if (error) {
+			psmouse_err(psmouse,
+				    "failed to register trackstick device: %d\n",
+				    error);
+			input_free_device(dev2);
 			goto init_fail;
+		}
+
+		priv->dev2 = dev2;
+	}
+
+	priv->psmouse = psmouse;
+
+	INIT_DELAYED_WORK(&priv->dev3_register_work,
+			  alps_register_bare_ps2_mouse);
 
 	psmouse->protocol_handler = alps_process_byte;
 	psmouse->poll = alps_poll;
@@ -2509,25 +2574,56 @@ int alps_init(struct psmouse *psmouse)
 
 init_fail:
 	psmouse_reset(psmouse);
-	input_free_device(dev2);
-	kfree(priv);
+	/*
+	 * Even though we did not allocate psmouse->private we do free
+	 * it here.
+	 */
+	kfree(psmouse->private);
 	psmouse->private = NULL;
-	return -1;
+	return error;
 }
 
 int alps_detect(struct psmouse *psmouse, bool set_properties)
 {
-	struct alps_data dummy;
+	struct alps_data *priv;
+	int error;
 
-	if (alps_identify(psmouse, &dummy) < 0)
-		return -1;
+	error = alps_identify(psmouse, NULL);
+	if (error)
+		return error;
+
+	/*
+	 * Reset the device to make sure it is fully operational:
+	 * on some laptops, like certain Dell Latitudes, we may
+	 * fail to properly detect presence of trackstick if device
+	 * has not been reset.
+	 */
+	psmouse_reset(psmouse);
+
+	priv = kzalloc(sizeof(struct alps_data), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	error = alps_identify(psmouse, priv);
+	if (error)
+		return error;
 
 	if (set_properties) {
 		psmouse->vendor = "ALPS";
-		psmouse->name = dummy.flags & ALPS_DUALPOINT ?
+		psmouse->name = priv->flags & ALPS_DUALPOINT ?
 				"DualPoint TouchPad" : "GlidePoint";
-		psmouse->model = dummy.proto_version << 8;
+		psmouse->model = priv->proto_version;
+	} else {
+		/*
+		 * Destroy alps_data structure we allocated earlier since
+		 * this was just a "trial run". Otherwise we'll keep it
+		 * to be used by alps_init() which has to be called if
+		 * we succeed and set_properties is true.
+		 */
+		kfree(priv);
+		psmouse->private = NULL;
 	}
+
 	return 0;
 }
 

drivers/input/mouse/alps.h

@@ -14,13 +14,14 @@
 
 #include <linux/input/mt.h>
 
-#define ALPS_PROTO_V1	1
-#define ALPS_PROTO_V2	2
-#define ALPS_PROTO_V3	3
-#define ALPS_PROTO_V4	4
-#define ALPS_PROTO_V5	5
-#define ALPS_PROTO_V6	6
-#define ALPS_PROTO_V7	7	/* t3btl t4s */
+#define ALPS_PROTO_V1		0x100
+#define ALPS_PROTO_V2		0x200
+#define ALPS_PROTO_V3		0x300
+#define ALPS_PROTO_V3_RUSHMORE	0x310
+#define ALPS_PROTO_V4		0x400
+#define ALPS_PROTO_V5		0x500
+#define ALPS_PROTO_V6		0x600
+#define ALPS_PROTO_V7		0x700	/* t3btl t4s */
 
 #define MAX_TOUCHES	2
 
@@ -45,6 +46,21 @@ enum V7_PACKET_ID {
 	 V7_PACKET_ID_UNKNOWN,
 };
 
+/**
+ * struct alps_protocol_info - information about protocol used by a device
+ * @version: Indicates V1/V2/V3/...
+ * @byte0: Helps figure out whether a position report packet matches the
+ *   known format for this model.  The first byte of the report, ANDed with
+ *   mask0, should match byte0.
+ * @mask0: The mask used to check the first byte of the report.
+ * @flags: Additional device capabilities (passthrough port, trackstick, etc.).
+ */
+struct alps_protocol_info {
+	u16 version;
+	u8 byte0, mask0;
+	unsigned int flags;
+};
+
 /**
  * struct alps_model_info - touchpad ID table
  * @signature: E7 response string to match.
@@ -52,23 +68,16 @@ enum V7_PACKET_ID {
  *   (aka command mode response) identifies the firmware minor version.  This
  *   can be used to distinguish different hardware models which are not
  *   uniquely identifiable through their E7 responses.
- * @proto_version: Indicates V1/V2/V3/...
- * @byte0: Helps figure out whether a position report packet matches the
- *   known format for this model.  The first byte of the report, ANDed with
- *   mask0, should match byte0.
- * @mask0: The mask used to check the first byte of the report.
- * @flags: Additional device capabilities (passthrough port, trackstick, etc.).
+ * @protocol_info: information about protcol used by the device.
  *
  * Many (but not all) ALPS touchpads can be identified by looking at the
  * values returned in the "E7 report" and/or the "EC report."  This table
  * lists a number of such touchpads.
  */
 struct alps_model_info {
-	unsigned char signature[3];
-	unsigned char command_mode_resp;
-	unsigned char proto_version;
-	unsigned char byte0, mask0;
-	int flags;
+	u8 signature[3];
+	u8 command_mode_resp;
+	struct alps_protocol_info protocol_info;
 };
 
 /**
@@ -132,8 +141,12 @@ struct alps_fields {
 
 /**
  * struct alps_data - private data structure for the ALPS driver
- * @dev2: "Relative" device used to report trackstick or mouse activity.
- * @phys: Physical path for the relative device.
+ * @psmouse: Pointer to parent psmouse device
+ * @dev2: Trackstick device (can be NULL).
+ * @dev3: Generic PS/2 mouse (can be NULL, delayed registering).
+ * @phys2: Physical path for the trackstick device.
+ * @phys3: Physical path for the generic PS/2 mouse.
+ * @dev3_register_work: Delayed work for registering PS/2 mouse.
  * @nibble_commands: Command mapping used for touchpad register accesses.
  * @addr_command: Command used to tell the touchpad that a register address
  *   follows.
@@ -160,15 +173,19 @@ struct alps_fields {
  * @timer: Timer for flushing out the final report packet in the stream.
  */
 struct alps_data {
+	struct psmouse *psmouse;
 	struct input_dev *dev2;
-	char phys[32];
+	struct input_dev *dev3;
+	char phys2[32];
+	char phys3[32];
+	struct delayed_work dev3_register_work;
 
 	/* these are autodetected when the device is identified */
 	const struct alps_nibble_commands *nibble_commands;
 	int addr_command;
-	unsigned char proto_version;
-	unsigned char byte0, mask0;
-	unsigned char fw_ver[3];
+	u16 proto_version;
+	u8 byte0, mask0;
+	u8 fw_ver[3];
 	int flags;
 	int x_max;
 	int y_max;

drivers/input/mouse/cypress_ps2.c

@@ -710,8 +710,3 @@ int cypress_init(struct psmouse *psmouse)
 
 	return -1;
 }
-
-bool cypress_supported(void)
-{
-	return true;
-}

drivers/input/mouse/cypress_ps2.h

@@ -172,7 +172,6 @@ struct cytp_data {
 #ifdef CONFIG_MOUSE_PS2_CYPRESS
 int cypress_detect(struct psmouse *psmouse, bool set_properties);
 int cypress_init(struct psmouse *psmouse);
-bool cypress_supported(void);
 #else
 inline int cypress_detect(struct psmouse *psmouse, bool set_properties)
 {
@@ -182,10 +181,6 @@ inline int cypress_init(struct psmouse *psmouse)
 {
 	return -ENOSYS;
 }
-inline bool cypress_supported(void)
-{
-	return 0;
-}
 #endif /* CONFIG_MOUSE_PS2_CYPRESS */
 
 #endif  /* _CYPRESS_PS2_H */

drivers/input/mouse/focaltech.c

@@ -424,11 +424,6 @@ int focaltech_init(struct psmouse *psmouse)
 	return error;
 }
 
-bool focaltech_supported(void)
-{
-	return true;
-}
-
 #else /* CONFIG_MOUSE_PS2_FOCALTECH */
 
 int focaltech_init(struct psmouse *psmouse)
@@ -438,9 +433,4 @@ int focaltech_init(struct psmouse *psmouse)
 	return 0;
 }
 
-bool focaltech_supported(void)
-{
-	return false;
-}
-
 #endif /* CONFIG_MOUSE_PS2_FOCALTECH */

drivers/input/mouse/focaltech.h

@@ -19,6 +19,5 @@
 
 int focaltech_detect(struct psmouse *psmouse, bool set_properties);
 int focaltech_init(struct psmouse *psmouse);
-bool focaltech_supported(void);
 
 #endif

drivers/input/mouse/psmouse-base.c

@@ -727,7 +727,7 @@ static int psmouse_extensions(struct psmouse *psmouse,
 	if (psmouse_do_detect(focaltech_detect, psmouse, set_properties) == 0) {
 		if (max_proto > PSMOUSE_IMEX) {
 			if (!set_properties || focaltech_init(psmouse) == 0) {
-				if (focaltech_supported())
+				if (IS_ENABLED(CONFIG_MOUSE_PS2_FOCALTECH))
 					return PSMOUSE_FOCALTECH;
 				/*
 				 * Note that we need to also restrict
@@ -776,7 +776,7 @@ static int psmouse_extensions(struct psmouse *psmouse,
  * Try activating protocol, but check if support is enabled first, since
  * we try detecting Synaptics even when protocol is disabled.
  */
-			if (synaptics_supported() &&
+			if (IS_ENABLED(CONFIG_MOUSE_PS2_SYNAPTICS) &&
 			    (!set_properties || synaptics_init(psmouse) == 0)) {
 				return PSMOUSE_SYNAPTICS;
 			}
@@ -801,7 +801,7 @@ static int psmouse_extensions(struct psmouse *psmouse,
  */
 	if (max_proto > PSMOUSE_IMEX &&
 			cypress_detect(psmouse, set_properties) == 0) {
-		if (cypress_supported()) {
+		if (IS_ENABLED(CONFIG_MOUSE_PS2_CYPRESS)) {
 			if (cypress_init(psmouse) == 0)
 				return PSMOUSE_CYPRESS;
 

drivers/input/mouse/synaptics.c

@@ -1454,11 +1454,6 @@ int synaptics_init_relative(struct psmouse *psmouse)
 	return __synaptics_init(psmouse, false);
 }
 
-bool synaptics_supported(void)
-{
-	return true;
-}
-
 #else /* CONFIG_MOUSE_PS2_SYNAPTICS */
 
 void __init synaptics_module_init(void)
@@ -1470,9 +1465,4 @@ int synaptics_init(struct psmouse *psmouse)
 	return -ENOSYS;
 }
 
-bool synaptics_supported(void)
-{
-	return false;
-}
-
 #endif /* CONFIG_MOUSE_PS2_SYNAPTICS */

drivers/input/mouse/synaptics.h

@@ -175,6 +175,5 @@ int synaptics_detect(struct psmouse *psmouse, bool set_properties);
 int synaptics_init(struct psmouse *psmouse);
 int synaptics_init_relative(struct psmouse *psmouse);
 void synaptics_reset(struct psmouse *psmouse);
-bool synaptics_supported(void);
 
 #endif /* _SYNAPTICS_H */

arch/blackfin/include/asm/bfin_rotary.h → include/linux/platform_data/bfin_rotary.h

@@ -40,6 +40,7 @@ struct bfin_rotary_platform_data {
 	unsigned short debounce;	/* 0..17 */
 	unsigned short mode;
 	unsigned short pm_wakeup;
+	unsigned short *pin_list;
 };
 
 /* CNT_CONFIG bitmasks */