提交 192cc7f0 编写于 作者: T Tiejun Chen 提交者: Ralf Baechle

MIPS: Malta: Add back RTC support

With the conversion of MIPS to RTC_LIB the old RTC driver CONFIG_RTC became
unselectable.  Fix by setting up a platform device.  Also enable
RTC_CLASS so system time gets set from RTC on kernel initialization.

[Ralf: Original patch by Tiejun; polished nice and shiny by me]
Signed-off-by: NTiejun Chen <tiejun.chen@windriver.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
上级 e807f957
......@@ -1126,7 +1126,6 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
CONFIG_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_DRM is not set
......@@ -1199,7 +1198,43 @@ CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_RTC_CLASS is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
#
# DMA Engine support
......
......@@ -6,7 +6,10 @@
* Copyright (C) 2007 MIPS Technologies, Inc.
* written by Ralf Baechle (ralf@linux-mips.org)
*
* Probe driver for the Malta's UART ports:
* Copyright (C) 2008 Wind River Systems, Inc.
* updated by Tiejun Chen <tiejun.chen@windriver.com>
*
* 1. Probe driver for the Malta's UART ports:
*
* o 2 ports in the SMC SuperIO
* o 1 port in the CBUS UART, a discrete 16550 which normally is only used
......@@ -14,10 +17,14 @@
*
* We don't use 8250_platform.c on Malta as it would result in the CBUS
* UART becoming ttyS0.
*
* 2. Register RTC-CMOS platform device on Malta.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/serial_8250.h>
#include <linux/mc146818rtc.h>
#include <linux/platform_device.h>
#define SMC_PORT(base, int) \
{ \
......@@ -45,7 +52,7 @@ static struct plat_serial8250_port uart8250_data[] = {
{ },
};
static struct platform_device uart8250_device = {
static struct platform_device malta_uart8250_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM2,
.dev = {
......@@ -53,13 +60,44 @@ static struct platform_device uart8250_device = {
},
};
static int __init uart8250_init(void)
struct resource malta_rtc_resources[] = {
{
.start = RTC_PORT(0),
.end = RTC_PORT(7),
.flags = IORESOURCE_IO,
}, {
.start = RTC_IRQ,
.end = RTC_IRQ,
.flags = IORESOURCE_IRQ,
}
};
static struct platform_device malta_rtc_device = {
.name = "rtc_cmos",
.id = -1,
.resource = malta_rtc_resources,
.num_resources = ARRAY_SIZE(malta_rtc_resources),
};
static struct platform_device *malta_devices[] __initdata = {
&malta_uart8250_device,
&malta_rtc_device,
};
static int __init malta_add_devices(void)
{
return platform_device_register(&uart8250_device);
}
int err;
err = platform_add_devices(malta_devices, ARRAY_SIZE(malta_devices));
if (err)
return err;
module_init(uart8250_init);
/*
* Set RTC to BCD mode to support current alarm code.
*/
CMOS_WRITE(CMOS_READ(RTC_CONTROL) & ~RTC_DM_BINARY, RTC_CONTROL);
return 0;
}
MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("8250 UART probe driver for the Malta CBUS UART");
device_initcall(malta_add_devices);
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册