ALSA: usb-audio: increase control transfer timeout

There are certain devices that are reportedly so slow that they need
more than 100 ms to handle control transfers.  Therefore, increase the
timeout in mixer(_quirks).c to 1000 ms.

The timeout parameter of snd_usb_ctl_msg() is now constant, so we can
drop it.
Reported-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

sound/usb/clock.c

@@ -91,7 +91,7 @@ static int uac_clock_selector_get_val(struct snd_usb_audio *chip, int selector_i
 			      USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
 			      UAC2_CX_CLOCK_SELECTOR << 8,
 			      snd_usb_ctrl_intf(chip) | (selector_id << 8),
-			      &buf, sizeof(buf), 1000);
+			      &buf, sizeof(buf));
 
 	if (ret < 0)
 		return ret;
@@ -118,7 +118,7 @@ static bool uac_clock_source_is_valid(struct snd_usb_audio *chip, int source_id)
 			      USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
 			      UAC2_CS_CONTROL_CLOCK_VALID << 8,
 			      snd_usb_ctrl_intf(chip) | (source_id << 8),
-			      &data, sizeof(data), 1000);
+			      &data, sizeof(data));
 
 	if (err < 0) {
 		snd_printk(KERN_WARNING "%s(): cannot get clock validity for id %d\n",
@@ -222,7 +222,7 @@ static int set_sample_rate_v1(struct snd_usb_audio *chip, int iface,
 	if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC_SET_CUR,
 				   USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_OUT,
 				   UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep,
-				   data, sizeof(data), 1000)) < 0) {
+				   data, sizeof(data))) < 0) {
 		snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d to ep %#x\n",
 			   dev->devnum, iface, fmt->altsetting, rate, ep);
 		return err;
@@ -231,7 +231,7 @@ static int set_sample_rate_v1(struct snd_usb_audio *chip, int iface,
 	if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC_GET_CUR,
 				   USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_IN,
 				   UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep,
-				   data, sizeof(data), 1000)) < 0) {
+				   data, sizeof(data))) < 0) {
 		snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq at ep %#x\n",
 			   dev->devnum, iface, fmt->altsetting, ep);
 		return 0; /* some devices don't support reading */
@@ -273,7 +273,7 @@ static int set_sample_rate_v2(struct snd_usb_audio *chip, int iface,
 				   USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
 				   UAC2_CS_CONTROL_SAM_FREQ << 8,
 				   snd_usb_ctrl_intf(chip) | (clock << 8),
-				   data, sizeof(data), 1000)) < 0) {
+				   data, sizeof(data))) < 0) {
 		snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d (v2)\n",
 			   dev->devnum, iface, fmt->altsetting, rate);
 		return err;
@@ -283,7 +283,7 @@ static int set_sample_rate_v2(struct snd_usb_audio *chip, int iface,
 				   USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
 				   UAC2_CS_CONTROL_SAM_FREQ << 8,
 				   snd_usb_ctrl_intf(chip) | (clock << 8),
-				   data, sizeof(data), 1000)) < 0) {
+				   data, sizeof(data))) < 0) {
 		snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq (v2)\n",
 			   dev->devnum, iface, fmt->altsetting);
 		return err;

sound/usb/format.c

@@ -286,7 +286,7 @@ static int parse_audio_format_rates_v2(struct snd_usb_audio *chip,
 			      USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
 			      UAC2_CS_CONTROL_SAM_FREQ << 8,
 			      snd_usb_ctrl_intf(chip) | (clock << 8),
-			      tmp, sizeof(tmp), 1000);
+			      tmp, sizeof(tmp));
 
 	if (ret < 0) {
 		snd_printk(KERN_ERR "%s(): unable to retrieve number of sample rates (clock %d)\n",
@@ -307,7 +307,7 @@ static int parse_audio_format_rates_v2(struct snd_usb_audio *chip,
 			      USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
 			      UAC2_CS_CONTROL_SAM_FREQ << 8,
 			      snd_usb_ctrl_intf(chip) | (clock << 8),
-			      data, data_size, 1000);
+			      data, data_size);
 
 	if (ret < 0) {
 		snd_printk(KERN_ERR "%s(): unable to retrieve sample rate range (clock %d)\n",

sound/usb/helper.c

@@ -81,7 +81,7 @@ void *snd_usb_find_csint_desc(void *buffer, int buflen, void *after, u8 dsubtype
  */
 int snd_usb_ctl_msg(struct usb_device *dev, unsigned int pipe, __u8 request,
 		    __u8 requesttype, __u16 value, __u16 index, void *data,
-		    __u16 size, int timeout)
+		    __u16 size)
 {
 	int err;
 	void *buf = NULL;
@@ -92,7 +92,7 @@ int snd_usb_ctl_msg(struct usb_device *dev, unsigned int pipe, __u8 request,
 			return -ENOMEM;
 	}
 	err = usb_control_msg(dev, pipe, request, requesttype,
-			      value, index, buf, size, timeout);
+			      value, index, buf, size, 1000);
 	if (size > 0) {
 		memcpy(data, buf, size);
 		kfree(buf);

sound/usb/helper.h

@@ -8,7 +8,7 @@ void *snd_usb_find_csint_desc(void *descstart, int desclen, void *after, u8 dsub
 
 int snd_usb_ctl_msg(struct usb_device *dev, unsigned int pipe,
 		    __u8 request, __u8 requesttype, __u16 value, __u16 index,
-		    void *data, __u16 size, int timeout);
+		    void *data, __u16 size);
 
 unsigned char snd_usb_parse_datainterval(struct snd_usb_audio *chip,
 					 struct usb_host_interface *alts);

sound/usb/mixer.c

@@ -296,7 +296,7 @@ static int get_ctl_value_v1(struct usb_mixer_elem_info *cval, int request, int v
 		if (snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), request,
 				    USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
 				    validx, snd_usb_ctrl_intf(chip) | (cval->id << 8),
-				    buf, val_len, 100) >= val_len) {
+				    buf, val_len) >= val_len) {
 			*value_ret = convert_signed_value(cval, snd_usb_combine_bytes(buf, val_len));
 			snd_usb_autosuspend(cval->mixer->chip);
 			return 0;
@@ -333,7 +333,7 @@ static int get_ctl_value_v2(struct usb_mixer_elem_info *cval, int request, int v
 	ret = snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), bRequest,
 			      USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
 			      validx, snd_usb_ctrl_intf(chip) | (cval->id << 8),
-			      buf, size, 1000);
+			      buf, size);
 	snd_usb_autosuspend(chip);
 
 	if (ret < 0) {
@@ -445,7 +445,7 @@ int snd_usb_mixer_set_ctl_value(struct usb_mixer_elem_info *cval,
 				    usb_sndctrlpipe(chip->dev, 0), request,
 				    USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT,
 				    validx, snd_usb_ctrl_intf(chip) | (cval->id << 8),
-				    buf, val_len, 100) >= 0) {
+				    buf, val_len) >= 0) {
 			snd_usb_autosuspend(chip);
 			return 0;
 		}

sound/usb/mixer_quirks.c

@@ -190,18 +190,18 @@ static int snd_audigy2nx_led_put(struct snd_kcontrol *kcontrol, struct snd_ctl_e
 		err = snd_usb_ctl_msg(mixer->chip->dev,
 			      usb_sndctrlpipe(mixer->chip->dev, 0), 0x24,
 			      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
-			      !value, 0, NULL, 0, 100);
+			      !value, 0, NULL, 0);
 	/* USB X-Fi S51 Pro */
 	if (mixer->chip->usb_id == USB_ID(0x041e, 0x30df))
 		err = snd_usb_ctl_msg(mixer->chip->dev,
 			      usb_sndctrlpipe(mixer->chip->dev, 0), 0x24,
 			      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
-			      !value, 0, NULL, 0, 100);
+			      !value, 0, NULL, 0);
 	else
 		err = snd_usb_ctl_msg(mixer->chip->dev,
 			      usb_sndctrlpipe(mixer->chip->dev, 0), 0x24,
 			      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
-			      value, index + 2, NULL, 0, 100);
+			      value, index + 2, NULL, 0);
 	if (err < 0)
 		return err;
 	mixer->audigy2nx_leds[index] = value;
@@ -299,7 +299,7 @@ static void snd_audigy2nx_proc_read(struct snd_info_entry *entry,
 				      usb_rcvctrlpipe(mixer->chip->dev, 0),
 				      UAC_GET_MEM, USB_DIR_IN | USB_TYPE_CLASS |
 				      USB_RECIP_INTERFACE, 0,
-				      jacks[i].unitid << 8, buf, 3, 100);
+				      jacks[i].unitid << 8, buf, 3);
 		if (err == 3 && (buf[0] == 3 || buf[0] == 6))
 			snd_iprintf(buffer, "%02x %02x\n", buf[1], buf[2]);
 		else
@@ -332,7 +332,7 @@ static int snd_xonar_u1_switch_put(struct snd_kcontrol *kcontrol,
 	err = snd_usb_ctl_msg(mixer->chip->dev,
 			      usb_sndctrlpipe(mixer->chip->dev, 0), 0x08,
 			      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
-			      50, 0, &new_status, 1, 100);
+			      50, 0, &new_status, 1);
 	if (err < 0)
 		return err;
 	mixer->xonar_u1_status = new_status;

sound/usb/pcm.c

@@ -152,7 +152,7 @@ static int init_pitch_v1(struct snd_usb_audio *chip, int iface,
 	if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC_SET_CUR,
 				   USB_TYPE_CLASS|USB_RECIP_ENDPOINT|USB_DIR_OUT,
 				   UAC_EP_CS_ATTR_PITCH_CONTROL << 8, ep,
-				   data, sizeof(data), 1000)) < 0) {
+				   data, sizeof(data))) < 0) {
 		snd_printk(KERN_ERR "%d:%d:%d: cannot set enable PITCH\n",
 			   dev->devnum, iface, ep);
 		return err;
@@ -176,7 +176,7 @@ static int init_pitch_v2(struct snd_usb_audio *chip, int iface,
 	if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC2_CS_CUR,
 				   USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_OUT,
 				   UAC2_EP_CS_PITCH << 8, 0,
-				   data, sizeof(data), 1000)) < 0) {
+				   data, sizeof(data))) < 0) {
 		snd_printk(KERN_ERR "%d:%d:%d: cannot set enable PITCH (v2)\n",
 			   dev->devnum, iface, fmt->altsetting);
 		return err;

sound/usb/quirks.c

@@ -340,7 +340,7 @@ static int snd_usb_extigy_boot_quirk(struct usb_device *dev, struct usb_interfac
 		snd_printdd("sending Extigy boot sequence...\n");
 		/* Send message to force it to reconnect with full interface. */
 		err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev,0),
-				      0x10, 0x43, 0x0001, 0x000a, NULL, 0, 1000);
+				      0x10, 0x43, 0x0001, 0x000a, NULL, 0);
 		if (err < 0) snd_printdd("error sending boot message: %d\n", err);
 		err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
 				&dev->descriptor, sizeof(dev->descriptor));
@@ -361,11 +361,11 @@ static int snd_usb_audigy2nx_boot_quirk(struct usb_device *dev)
 
 	snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), 0x2a,
 			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER,
-			0, 0, &buf, 1, 1000);
+			0, 0, &buf, 1);
 	if (buf == 0) {
 		snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 0x29,
 				USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
-				1, 2000, NULL, 0, 1000);
+				1, 2000, NULL, 0);
 		return -ENODEV;
 	}
 	return 0;
@@ -408,7 +408,7 @@ static int snd_usb_cm106_write_int_reg(struct usb_device *dev, int reg, u16 valu
 	buf[3] = reg;
 	return snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), USB_REQ_SET_CONFIGURATION,
 			       USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_ENDPOINT,
-			       0, 0, &buf, 4, 1000);
+			       0, 0, &buf, 4);
 }
 
 static int snd_usb_cm106_boot_quirk(struct usb_device *dev)