diff --git a/arch/arm/include/asm/hardware/sp810.h b/arch/arm/include/asm/hardware/sp810.h index 6b9b077d86b3788fabb129c0b18bfb722724a697..afd7e916472f62a8a80c3ff7db8977d0e63ea4c0 100644 --- a/arch/arm/include/asm/hardware/sp810.h +++ b/arch/arm/include/asm/hardware/sp810.h @@ -56,6 +56,8 @@ #define SCCTRL_TIMEREN1SEL_REFCLK (0 << 17) #define SCCTRL_TIMEREN1SEL_TIMCLK (1 << 17) +#define SCCTRL_TIMERENnSEL_SHIFT(n) (15 + ((n) * 2)) + static inline void sysctl_soft_reset(void __iomem *base) { /* switch to slow mode */ diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index bace9e98f75d48c87f79fd91f1319144a3e4c82e..823f62d900ba02183bfb2de6daf81175bfb92841 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -42,10 +42,12 @@ config COMMON_CLK_WM831X config COMMON_CLK_VERSATILE bool "Clock driver for ARM Reference designs" - depends on ARCH_INTEGRATOR || ARCH_REALVIEW + depends on ARCH_INTEGRATOR || ARCH_REALVIEW || ARCH_VEXPRESS ---help--- - Supports clocking on ARM Reference designs Integrator/AP, - Integrator/CP, RealView PB1176, EB, PB11MP and PBX. + Supports clocking on ARM Reference designs: + - Integrator/AP and Integrator/CP + - RealView PB1176, EB, PB11MP and PBX + - Versatile Express config COMMON_CLK_MAX77686 tristate "Clock driver for Maxim 77686 MFD" @@ -53,4 +55,12 @@ config COMMON_CLK_MAX77686 ---help--- This driver supports Maxim 77686 crystal oscillator clock. +config CLK_TWL6040 + tristate "External McPDM functional clock from twl6040" + depends on TWL6040_CORE + ---help--- + Enable the external functional clock support on OMAP4+ platforms for + McPDM. McPDM module is using the external bit clock on the McPDM bus + as functional clock. + endmenu diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 9c300a828edeff67ffda51c6ba8a144e17ac4a08..a96bda3d3b845f8715a6b66a6f840ecc99d2250e 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -24,3 +24,4 @@ obj-$(CONFIG_ARCH_SUNXI) += clk-sunxi.o # Chip specific obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o +obj-$(CONFIG_CLK_TWL6040) += clk-twl6040.o diff --git a/drivers/clk/clk-fixed-rate.c b/drivers/clk/clk-fixed-rate.c index f5ec0eebd4d7ce324aa59ae49bdfb03c03ea6daa..af78ed6b67ef36ea32438096df6121218c94d44e 100644 --- a/drivers/clk/clk-fixed-rate.c +++ b/drivers/clk/clk-fixed-rate.c @@ -97,7 +97,7 @@ void __init of_fixed_clk_setup(struct device_node *node) of_property_read_string(node, "clock-output-names", &clk_name); clk = clk_register_fixed_rate(NULL, clk_name, NULL, CLK_IS_ROOT, rate); - if (clk) + if (!IS_ERR(clk)) of_clk_add_provider(node, of_clk_src_simple_get, clk); } EXPORT_SYMBOL_GPL(of_fixed_clk_setup); diff --git a/drivers/clk/clk-prima2.c b/drivers/clk/clk-prima2.c index 517874fa68588dca51d39f3243cb512aff1dfaf3..a203ecccdc4f8c6a1fd71d357fdfdeb9341a7bad 100644 --- a/drivers/clk/clk-prima2.c +++ b/drivers/clk/clk-prima2.c @@ -1054,118 +1054,118 @@ void __init sirfsoc_of_clk_init(void) /* These are always available (RTC and 26MHz OSC)*/ clk = clk_register_fixed_rate(NULL, "rtc", NULL, CLK_IS_ROOT, 32768); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk = clk_register_fixed_rate(NULL, "osc", NULL, CLK_IS_ROOT, 26000000); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk = clk_register(NULL, &clk_pll1.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk = clk_register(NULL, &clk_pll2.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk = clk_register(NULL, &clk_pll3.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk = clk_register(NULL, &clk_mem.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk = clk_register(NULL, &clk_sys.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk = clk_register(NULL, &clk_security.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b8030000.security"); clk = clk_register(NULL, &clk_dsp.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk = clk_register(NULL, &clk_gps.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "a8010000.gps"); clk = clk_register(NULL, &clk_mf.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk = clk_register(NULL, &clk_io.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "io"); clk = clk_register(NULL, &clk_cpu.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "cpu"); clk = clk_register(NULL, &clk_uart0.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b0050000.uart"); clk = clk_register(NULL, &clk_uart1.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b0060000.uart"); clk = clk_register(NULL, &clk_uart2.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b0070000.uart"); clk = clk_register(NULL, &clk_tsc.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b0110000.tsc"); clk = clk_register(NULL, &clk_i2c0.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b00e0000.i2c"); clk = clk_register(NULL, &clk_i2c1.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b00f0000.i2c"); clk = clk_register(NULL, &clk_spi0.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b00d0000.spi"); clk = clk_register(NULL, &clk_spi1.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b0170000.spi"); clk = clk_register(NULL, &clk_pwmc.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b0130000.pwm"); clk = clk_register(NULL, &clk_efuse.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b0140000.efusesys"); clk = clk_register(NULL, &clk_pulse.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b0150000.pulsec"); clk = clk_register(NULL, &clk_dmac0.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b00b0000.dma-controller"); clk = clk_register(NULL, &clk_dmac1.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b0160000.dma-controller"); clk = clk_register(NULL, &clk_nand.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b0030000.nand"); clk = clk_register(NULL, &clk_audio.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b0040000.audio"); clk = clk_register(NULL, &clk_usp0.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b0080000.usp"); clk = clk_register(NULL, &clk_usp1.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b0090000.usp"); clk = clk_register(NULL, &clk_usp2.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b00a0000.usp"); clk = clk_register(NULL, &clk_vip.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b00c0000.vip"); clk = clk_register(NULL, &clk_gfx.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "98000000.graphics"); clk = clk_register(NULL, &clk_mm.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "a0000000.multimedia"); clk = clk_register(NULL, &clk_lcd.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "90010000.display"); clk = clk_register(NULL, &clk_vpp.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "90020000.vpp"); clk = clk_register(NULL, &clk_mmc01.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk = clk_register(NULL, &clk_mmc23.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk = clk_register(NULL, &clk_mmc45.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk = clk_register(NULL, &usb_pll_clk_hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk = clk_register(NULL, &clk_usb0.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b00e0000.usb"); clk = clk_register(NULL, &clk_usb1.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b00f0000.usb"); } diff --git a/drivers/clk/clk-twl6040.c b/drivers/clk/clk-twl6040.c new file mode 100644 index 0000000000000000000000000000000000000000..f4a3389c3d09d0d74f490c29832cebdea75ca5ac --- /dev/null +++ b/drivers/clk/clk-twl6040.c @@ -0,0 +1,126 @@ +/* +* TWL6040 clock module driver for OMAP4 McPDM functional clock +* +* Copyright (C) 2012 Texas Instruments Inc. +* Peter Ujfalusi +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License +* version 2 as published by the Free Software Foundation. +* +* This program is distributed in the hope that it will be useful, but +* WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +* General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA +* 02110-1301 USA +* +*/ + +#include +#include +#include +#include +#include +#include + +struct twl6040_clk { + struct twl6040 *twl6040; + struct device *dev; + struct clk_hw mcpdm_fclk; + struct clk *clk; + int enabled; +}; + +static int twl6040_bitclk_is_enabled(struct clk_hw *hw) +{ + struct twl6040_clk *twl6040_clk = container_of(hw, struct twl6040_clk, + mcpdm_fclk); + return twl6040_clk->enabled; +} + +static int twl6040_bitclk_prepare(struct clk_hw *hw) +{ + struct twl6040_clk *twl6040_clk = container_of(hw, struct twl6040_clk, + mcpdm_fclk); + int ret; + + ret = twl6040_power(twl6040_clk->twl6040, 1); + if (!ret) + twl6040_clk->enabled = 1; + + return ret; +} + +static void twl6040_bitclk_unprepare(struct clk_hw *hw) +{ + struct twl6040_clk *twl6040_clk = container_of(hw, struct twl6040_clk, + mcpdm_fclk); + int ret; + + ret = twl6040_power(twl6040_clk->twl6040, 0); + if (!ret) + twl6040_clk->enabled = 0; +} + +static const struct clk_ops twl6040_mcpdm_ops = { + .is_enabled = twl6040_bitclk_is_enabled, + .prepare = twl6040_bitclk_prepare, + .unprepare = twl6040_bitclk_unprepare, +}; + +static struct clk_init_data wm831x_clkout_init = { + .name = "mcpdm_fclk", + .ops = &twl6040_mcpdm_ops, + .flags = CLK_IS_ROOT, +}; + +static int __devinit twl6040_clk_probe(struct platform_device *pdev) +{ + struct twl6040 *twl6040 = dev_get_drvdata(pdev->dev.parent); + struct twl6040_clk *clkdata; + + clkdata = devm_kzalloc(&pdev->dev, sizeof(*clkdata), GFP_KERNEL); + if (!clkdata) + return -ENOMEM; + + clkdata->dev = &pdev->dev; + clkdata->twl6040 = twl6040; + + clkdata->mcpdm_fclk.init = &wm831x_clkout_init; + clkdata->clk = clk_register(&pdev->dev, &clkdata->mcpdm_fclk); + if (!clkdata->clk) + return -EINVAL; + + dev_set_drvdata(&pdev->dev, clkdata); + + return 0; +} + +static int __devexit twl6040_clk_remove(struct platform_device *pdev) +{ + struct twl6040_clk *clkdata = dev_get_drvdata(&pdev->dev); + + clk_unregister(clkdata->clk); + + return 0; +} + +static struct platform_driver twl6040_clk_driver = { + .driver = { + .name = "twl6040-clk", + .owner = THIS_MODULE, + }, + .probe = twl6040_clk_probe, + .remove = __devexit_p(twl6040_clk_remove), +}; + +module_platform_driver(twl6040_clk_driver); + +MODULE_DESCRIPTION("TWL6040 clock driver for McPDM functional clock"); +MODULE_AUTHOR("Peter Ujfalusi "); +MODULE_ALIAS("platform:twl6040-clk"); +MODULE_LICENSE("GPL"); diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 56e4495ebeb118694237c9b542b381b0c1de4f02..bbe52c4ae7cac1dba2bac69895bd1194e2db61b1 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -261,7 +261,7 @@ inline struct clk_hw *__clk_get_hw(struct clk *clk) inline u8 __clk_get_num_parents(struct clk *clk) { - return !clk ? -EINVAL : clk->num_parents; + return !clk ? 0 : clk->num_parents; } inline struct clk *__clk_get_parent(struct clk *clk) @@ -269,14 +269,14 @@ inline struct clk *__clk_get_parent(struct clk *clk) return !clk ? NULL : clk->parent; } -inline int __clk_get_enable_count(struct clk *clk) +inline unsigned int __clk_get_enable_count(struct clk *clk) { - return !clk ? -EINVAL : clk->enable_count; + return !clk ? 0 : clk->enable_count; } -inline int __clk_get_prepare_count(struct clk *clk) +inline unsigned int __clk_get_prepare_count(struct clk *clk) { - return !clk ? -EINVAL : clk->prepare_count; + return !clk ? 0 : clk->prepare_count; } unsigned long __clk_get_rate(struct clk *clk) @@ -302,15 +302,15 @@ unsigned long __clk_get_rate(struct clk *clk) inline unsigned long __clk_get_flags(struct clk *clk) { - return !clk ? -EINVAL : clk->flags; + return !clk ? 0 : clk->flags; } -int __clk_is_enabled(struct clk *clk) +bool __clk_is_enabled(struct clk *clk) { int ret; if (!clk) - return -EINVAL; + return false; /* * .is_enabled is only mandatory for clocks that gate @@ -323,7 +323,7 @@ int __clk_is_enabled(struct clk *clk) ret = clk->ops->is_enabled(clk->hw); out: - return ret; + return !!ret; } static struct clk *__clk_lookup_subtree(const char *name, struct clk *clk) @@ -568,7 +568,7 @@ unsigned long __clk_round_rate(struct clk *clk, unsigned long rate) unsigned long parent_rate = 0; if (!clk) - return -EINVAL; + return 0; if (!clk->ops->round_rate) { if (clk->flags & CLK_SET_RATE_PARENT) diff --git a/drivers/clk/spear/clk-vco-pll.c b/drivers/clk/spear/clk-vco-pll.c index 5f1b6badeb15be0a8fa8a9285f90c0bfe9c9b55f..1b9b65bca51edbf65ba6ba62d39d7520a19f7453 100644 --- a/drivers/clk/spear/clk-vco-pll.c +++ b/drivers/clk/spear/clk-vco-pll.c @@ -147,7 +147,7 @@ static int clk_pll_set_rate(struct clk_hw *hw, unsigned long drate, struct clk_pll *pll = to_clk_pll(hw); struct pll_rate_tbl *rtbl = pll->vco->rtbl; unsigned long flags = 0, val; - int i; + int uninitialized_var(i); clk_pll_round_rate_index(hw, drate, NULL, &i); diff --git a/drivers/clk/ux500/clk-prcmu.c b/drivers/clk/ux500/clk-prcmu.c index 930cdfeb47ab451659843446b3f8ebdcdee01776..04577ca6a3081d63a88fd78f68484db91a1bd011 100644 --- a/drivers/clk/ux500/clk-prcmu.c +++ b/drivers/clk/ux500/clk-prcmu.c @@ -133,6 +133,40 @@ static void clk_prcmu_opp_unprepare(struct clk_hw *hw) hw->init->name); } +static int clk_prcmu_opp_volt_prepare(struct clk_hw *hw) +{ + int err; + struct clk_prcmu *clk = to_clk_prcmu(hw); + + err = prcmu_request_ape_opp_100_voltage(true); + if (err) { + pr_err("clk_prcmu: %s failed to request APE OPP VOLT for %s.\n", + __func__, hw->init->name); + return err; + } + + err = prcmu_request_clock(clk->cg_sel, true); + if (err) + prcmu_request_ape_opp_100_voltage(false); + + return err; +} + +static void clk_prcmu_opp_volt_unprepare(struct clk_hw *hw) +{ + struct clk_prcmu *clk = to_clk_prcmu(hw); + + if (prcmu_request_clock(clk->cg_sel, false)) + goto out_error; + if (prcmu_request_ape_opp_100_voltage(false)) + goto out_error; + return; + +out_error: + pr_err("clk_prcmu: %s failed to disable %s.\n", __func__, + hw->init->name); +} + static struct clk_ops clk_prcmu_scalable_ops = { .prepare = clk_prcmu_prepare, .unprepare = clk_prcmu_unprepare, @@ -167,6 +201,17 @@ static struct clk_ops clk_prcmu_opp_gate_ops = { .recalc_rate = clk_prcmu_recalc_rate, }; +static struct clk_ops clk_prcmu_opp_volt_scalable_ops = { + .prepare = clk_prcmu_opp_volt_prepare, + .unprepare = clk_prcmu_opp_volt_unprepare, + .enable = clk_prcmu_enable, + .disable = clk_prcmu_disable, + .is_enabled = clk_prcmu_is_enabled, + .recalc_rate = clk_prcmu_recalc_rate, + .round_rate = clk_prcmu_round_rate, + .set_rate = clk_prcmu_set_rate, +}; + static struct clk *clk_reg_prcmu(const char *name, const char *parent_name, u8 cg_sel, @@ -250,3 +295,13 @@ struct clk *clk_reg_prcmu_opp_gate(const char *name, return clk_reg_prcmu(name, parent_name, cg_sel, 0, flags, &clk_prcmu_opp_gate_ops); } + +struct clk *clk_reg_prcmu_opp_volt_scalable(const char *name, + const char *parent_name, + u8 cg_sel, + unsigned long rate, + unsigned long flags) +{ + return clk_reg_prcmu(name, parent_name, cg_sel, rate, flags, + &clk_prcmu_opp_volt_scalable_ops); +} diff --git a/drivers/clk/ux500/clk.h b/drivers/clk/ux500/clk.h index 836d7d16751ea914616fda13878b177201fceb68..f36eeedca49305fdc52061006d00f51a5f1e5a6c 100644 --- a/drivers/clk/ux500/clk.h +++ b/drivers/clk/ux500/clk.h @@ -45,4 +45,10 @@ struct clk *clk_reg_prcmu_opp_gate(const char *name, u8 cg_sel, unsigned long flags); +struct clk *clk_reg_prcmu_opp_volt_scalable(const char *name, + const char *parent_name, + u8 cg_sel, + unsigned long rate, + unsigned long flags); + #endif /* __UX500_CLK_H */ diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c index ca4a25ed844c379315c2834dcd239c4b9d50940d..7bebf1f62c65d6d752c47fb1d12ab649a39875d4 100644 --- a/drivers/clk/ux500/u8500_clk.c +++ b/drivers/clk/ux500/u8500_clk.c @@ -170,10 +170,11 @@ void u8500_clk_init(void) clk_register_clkdev(clk, NULL, "mtu0"); clk_register_clkdev(clk, NULL, "mtu1"); - clk = clk_reg_prcmu_gate("sdmmcclk", NULL, PRCMU_SDMMCCLK, CLK_IS_ROOT); + clk = clk_reg_prcmu_opp_volt_scalable("sdmmcclk", NULL, PRCMU_SDMMCCLK, + 100000000, + CLK_IS_ROOT|CLK_SET_RATE_GATE); clk_register_clkdev(clk, NULL, "sdmmc"); - clk = clk_reg_prcmu_scalable("dsi_pll", "hdmiclk", PRCMU_PLLDSI, 0, CLK_SET_RATE_GATE); clk_register_clkdev(clk, "dsihs2", "mcde"); diff --git a/drivers/clk/versatile/Makefile b/drivers/clk/versatile/Makefile index c0a0f647879848ff245db88cd7ef0306796b85f9..c776053e5bb48295bbf45b632b5ab336940254b9 100644 --- a/drivers/clk/versatile/Makefile +++ b/drivers/clk/versatile/Makefile @@ -2,3 +2,5 @@ obj-$(CONFIG_ICST) += clk-icst.o obj-$(CONFIG_ARCH_INTEGRATOR) += clk-integrator.o obj-$(CONFIG_ARCH_REALVIEW) += clk-realview.o +obj-$(CONFIG_ARCH_VEXPRESS) += clk-vexpress.o +obj-$(CONFIG_VEXPRESS_CONFIG) += clk-vexpress-osc.o diff --git a/drivers/clk/versatile/clk-vexpress-osc.c b/drivers/clk/versatile/clk-vexpress-osc.c new file mode 100644 index 0000000000000000000000000000000000000000..dcb6ae0a04256db9da9906106707f17d311b5ef2 --- /dev/null +++ b/drivers/clk/versatile/clk-vexpress-osc.c @@ -0,0 +1,146 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Copyright (C) 2012 ARM Limited + */ + +#define pr_fmt(fmt) "vexpress-osc: " fmt + +#include +#include +#include +#include +#include +#include +#include + +struct vexpress_osc { + struct vexpress_config_func *func; + struct clk_hw hw; + unsigned long rate_min; + unsigned long rate_max; +}; + +#define to_vexpress_osc(osc) container_of(osc, struct vexpress_osc, hw) + +static unsigned long vexpress_osc_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct vexpress_osc *osc = to_vexpress_osc(hw); + u32 rate; + + vexpress_config_read(osc->func, 0, &rate); + + return rate; +} + +static long vexpress_osc_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + struct vexpress_osc *osc = to_vexpress_osc(hw); + + if (WARN_ON(osc->rate_min && rate < osc->rate_min)) + rate = osc->rate_min; + + if (WARN_ON(osc->rate_max && rate > osc->rate_max)) + rate = osc->rate_max; + + return rate; +} + +static int vexpress_osc_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct vexpress_osc *osc = to_vexpress_osc(hw); + + return vexpress_config_write(osc->func, 0, rate); +} + +static struct clk_ops vexpress_osc_ops = { + .recalc_rate = vexpress_osc_recalc_rate, + .round_rate = vexpress_osc_round_rate, + .set_rate = vexpress_osc_set_rate, +}; + + +struct clk * __init vexpress_osc_setup(struct device *dev) +{ + struct clk_init_data init; + struct vexpress_osc *osc = kzalloc(sizeof(*osc), GFP_KERNEL); + + if (!osc) + return NULL; + + osc->func = vexpress_config_func_get_by_dev(dev); + if (!osc->func) { + kfree(osc); + return NULL; + } + + init.name = dev_name(dev); + init.ops = &vexpress_osc_ops; + init.flags = CLK_IS_ROOT; + init.num_parents = 0; + osc->hw.init = &init; + + return clk_register(NULL, &osc->hw); +} + +void __init vexpress_osc_of_setup(struct device_node *node) +{ + struct clk_init_data init; + struct vexpress_osc *osc; + struct clk *clk; + u32 range[2]; + + osc = kzalloc(sizeof(*osc), GFP_KERNEL); + if (!osc) + goto error; + + osc->func = vexpress_config_func_get_by_node(node); + if (!osc->func) { + pr_err("Failed to obtain config func for node '%s'!\n", + node->name); + goto error; + } + + if (of_property_read_u32_array(node, "freq-range", range, + ARRAY_SIZE(range)) == 0) { + osc->rate_min = range[0]; + osc->rate_max = range[1]; + } + + of_property_read_string(node, "clock-output-names", &init.name); + if (!init.name) + init.name = node->name; + + init.ops = &vexpress_osc_ops; + init.flags = CLK_IS_ROOT; + init.num_parents = 0; + + osc->hw.init = &init; + + clk = clk_register(NULL, &osc->hw); + if (IS_ERR(clk)) { + pr_err("Failed to register clock '%s'!\n", init.name); + goto error; + } + + of_clk_add_provider(node, of_clk_src_simple_get, clk); + + pr_debug("Registered clock '%s'\n", init.name); + + return; + +error: + if (osc->func) + vexpress_config_func_put(osc->func); + kfree(osc); +} diff --git a/drivers/clk/versatile/clk-vexpress.c b/drivers/clk/versatile/clk-vexpress.c new file mode 100644 index 0000000000000000000000000000000000000000..c742ac7c60bb3613184106520330eea8427e983e --- /dev/null +++ b/drivers/clk/versatile/clk-vexpress.c @@ -0,0 +1,142 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Copyright (C) 2012 ARM Limited + */ + +#include +#include +#include +#include +#include +#include + +#include + +static struct clk *vexpress_sp810_timerclken[4]; +static DEFINE_SPINLOCK(vexpress_sp810_lock); + +static void __init vexpress_sp810_init(void __iomem *base) +{ + int i; + + if (WARN_ON(!base)) + return; + + for (i = 0; i < ARRAY_SIZE(vexpress_sp810_timerclken); i++) { + char name[12]; + const char *parents[] = { + "v2m:refclk32khz", /* REFCLK */ + "v2m:refclk1mhz" /* TIMCLK */ + }; + + snprintf(name, ARRAY_SIZE(name), "timerclken%d", i); + + vexpress_sp810_timerclken[i] = clk_register_mux(NULL, name, + parents, 2, 0, base + SCCTRL, + SCCTRL_TIMERENnSEL_SHIFT(i), 1, + 0, &vexpress_sp810_lock); + + if (WARN_ON(IS_ERR(vexpress_sp810_timerclken[i]))) + break; + } +} + + +static const char * const vexpress_clk_24mhz_periphs[] __initconst = { + "mb:uart0", "mb:uart1", "mb:uart2", "mb:uart3", + "mb:mmci", "mb:kmi0", "mb:kmi1" +}; + +void __init vexpress_clk_init(void __iomem *sp810_base) +{ + struct clk *clk; + int i; + + clk = clk_register_fixed_rate(NULL, "dummy_apb_pclk", NULL, + CLK_IS_ROOT, 0); + WARN_ON(clk_register_clkdev(clk, "apb_pclk", NULL)); + + clk = clk_register_fixed_rate(NULL, "v2m:clk_24mhz", NULL, + CLK_IS_ROOT, 24000000); + for (i = 0; i < ARRAY_SIZE(vexpress_clk_24mhz_periphs); i++) + WARN_ON(clk_register_clkdev(clk, NULL, + vexpress_clk_24mhz_periphs[i])); + + clk = clk_register_fixed_rate(NULL, "v2m:refclk32khz", NULL, + CLK_IS_ROOT, 32768); + WARN_ON(clk_register_clkdev(clk, NULL, "v2m:wdt")); + + clk = clk_register_fixed_rate(NULL, "v2m:refclk1mhz", NULL, + CLK_IS_ROOT, 1000000); + + vexpress_sp810_init(sp810_base); + + for (i = 0; i < ARRAY_SIZE(vexpress_sp810_timerclken); i++) + WARN_ON(clk_set_parent(vexpress_sp810_timerclken[i], clk)); + + WARN_ON(clk_register_clkdev(vexpress_sp810_timerclken[0], + "v2m-timer0", "sp804")); + WARN_ON(clk_register_clkdev(vexpress_sp810_timerclken[1], + "v2m-timer1", "sp804")); +} + +#if defined(CONFIG_OF) + +struct clk *vexpress_sp810_of_get(struct of_phandle_args *clkspec, void *data) +{ + if (WARN_ON(clkspec->args_count != 1 || clkspec->args[0] > + ARRAY_SIZE(vexpress_sp810_timerclken))) + return NULL; + + return vexpress_sp810_timerclken[clkspec->args[0]]; +} + +static const __initconst struct of_device_id vexpress_fixed_clk_match[] = { + { .compatible = "fixed-clock", .data = of_fixed_clk_setup, }, + { .compatible = "arm,vexpress-osc", .data = vexpress_osc_of_setup, }, + {} +}; + +void __init vexpress_clk_of_init(void) +{ + struct device_node *node; + struct clk *clk; + struct clk *refclk, *timclk; + + of_clk_init(vexpress_fixed_clk_match); + + node = of_find_compatible_node(NULL, NULL, "arm,sp810"); + vexpress_sp810_init(of_iomap(node, 0)); + of_clk_add_provider(node, vexpress_sp810_of_get, NULL); + + /* Select "better" (faster) parent for SP804 timers */ + refclk = of_clk_get_by_name(node, "refclk"); + timclk = of_clk_get_by_name(node, "timclk"); + if (!WARN_ON(IS_ERR(refclk) || IS_ERR(timclk))) { + int i = 0; + + if (clk_get_rate(refclk) > clk_get_rate(timclk)) + clk = refclk; + else + clk = timclk; + + for (i = 0; i < ARRAY_SIZE(vexpress_sp810_timerclken); i++) + WARN_ON(clk_set_parent(vexpress_sp810_timerclken[i], + clk)); + } + + WARN_ON(clk_register_clkdev(vexpress_sp810_timerclken[0], + "v2m-timer0", "sp804")); + WARN_ON(clk_register_clkdev(vexpress_sp810_timerclken[1], + "v2m-timer1", "sp804")); +} + +#endif diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 00b8b0f3dfb6c998676958be96972476aa7773f3..3167bfdd13fa04011ffa231fde753c5cd4098d3a 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -1169,12 +1169,12 @@ int db8500_prcmu_get_ape_opp(void) } /** - * prcmu_request_ape_opp_100_voltage - Request APE OPP 100% voltage + * db8500_prcmu_request_ape_opp_100_voltage - Request APE OPP 100% voltage * @enable: true to request the higher voltage, false to drop a request. * * Calls to this function to enable and disable requests must be balanced. */ -int prcmu_request_ape_opp_100_voltage(bool enable) +int db8500_prcmu_request_ape_opp_100_voltage(bool enable) { int r = 0; u8 header; diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index c127315829208046fbd9327488dfc258cc1d0372..0dce3d31eae5e43f32a138f54ff3533d3a22ec9b 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -53,9 +53,13 @@ struct clk_hw; * @disable: Disable the clock atomically. Called with enable_lock held. * This function must not sleep. * - * @recalc_rate Recalculate the rate of this clock, by quering hardware. The + * @is_enabled: Queries the hardware to determine if the clock is enabled. + * This function must not sleep. Optional, if this op is not + * set then the enable count will be used. + * + * @recalc_rate Recalculate the rate of this clock, by querying hardware. The * parent rate is an input parameter. It is up to the caller to - * insure that the prepare_mutex is held across this call. + * ensure that the prepare_mutex is held across this call. * Returns the calculated rate. Optional, but recommended - if * this op is not set then clock rate will be initialized to 0. * @@ -89,7 +93,7 @@ struct clk_hw; * implementations to split any work between atomic (enable) and sleepable * (prepare) contexts. If enabling a clock requires code that might sleep, * this must be done in clk_prepare. Clock enable code that will never be - * called in a sleepable context may be implement in clk_enable. + * called in a sleepable context may be implemented in clk_enable. * * Typically, drivers will call clk_prepare when a clock may be needed later * (eg. when a device is opened), and clk_enable when the clock is actually @@ -335,11 +339,11 @@ const char *__clk_get_name(struct clk *clk); struct clk_hw *__clk_get_hw(struct clk *clk); u8 __clk_get_num_parents(struct clk *clk); struct clk *__clk_get_parent(struct clk *clk); -inline int __clk_get_enable_count(struct clk *clk); -inline int __clk_get_prepare_count(struct clk *clk); +inline unsigned int __clk_get_enable_count(struct clk *clk); +inline unsigned int __clk_get_prepare_count(struct clk *clk); unsigned long __clk_get_rate(struct clk *clk); unsigned long __clk_get_flags(struct clk *clk); -int __clk_is_enabled(struct clk *clk); +bool __clk_is_enabled(struct clk *clk); struct clk *__clk_lookup(const char *name); /* diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h index b82f6ee66a0bb21849777fddbdffdc3585ca03d1..6ee4247df11e923bd004926e1a39c719e2d4a3c5 100644 --- a/include/linux/mfd/db8500-prcmu.h +++ b/include/linux/mfd/db8500-prcmu.h @@ -515,7 +515,6 @@ enum romcode_read prcmu_get_rc_p2a(void); enum ap_pwrst prcmu_get_xp70_current_state(void); bool prcmu_has_arm_maxopp(void); struct prcmu_fw_version *prcmu_get_fw_version(void); -int prcmu_request_ape_opp_100_voltage(bool enable); int prcmu_release_usb_wakeup_state(void); void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep, struct prcmu_auto_pm_config *idle); @@ -564,6 +563,7 @@ int db8500_prcmu_set_arm_opp(u8 opp); int db8500_prcmu_get_arm_opp(void); int db8500_prcmu_set_ape_opp(u8 opp); int db8500_prcmu_get_ape_opp(void); +int db8500_prcmu_request_ape_opp_100_voltage(bool enable); int db8500_prcmu_set_ddr_opp(u8 opp); int db8500_prcmu_get_ddr_opp(void); @@ -610,7 +610,7 @@ static inline int db8500_prcmu_get_ape_opp(void) return APE_100_OPP; } -static inline int prcmu_request_ape_opp_100_voltage(bool enable) +static inline int db8500_prcmu_request_ape_opp_100_voltage(bool enable) { return 0; } diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h index c410d99bd6678ea86dc7f704f0355a4e40517218..c202d6c4d87916bb82ca8aeade76b3ee1ebba3b2 100644 --- a/include/linux/mfd/dbx500-prcmu.h +++ b/include/linux/mfd/dbx500-prcmu.h @@ -336,6 +336,11 @@ static inline int prcmu_get_ape_opp(void) return db8500_prcmu_get_ape_opp(); } +static inline int prcmu_request_ape_opp_100_voltage(bool enable) +{ + return db8500_prcmu_request_ape_opp_100_voltage(enable); +} + static inline void prcmu_system_reset(u16 reset_code) { return db8500_prcmu_system_reset(reset_code); @@ -507,6 +512,11 @@ static inline int prcmu_get_ape_opp(void) return APE_100_OPP; } +static inline int prcmu_request_ape_opp_100_voltage(bool enable) +{ + return 0; +} + static inline int prcmu_set_arm_opp(u8 opp) { return 0;