From 166e9278a3f98bab29ebb3d685a81cfb11b98be0 Mon Sep 17 00:00:00 2001 From: Ohad Ben-Cohen Date: Fri, 10 Jun 2011 21:42:27 +0300 Subject: [PATCH] x86/ia64: intel-iommu: move to drivers/iommu/ This should ease finding similarities with different platforms, with the intention of solving problems once in a generic framework which everyone can use. Note: to move intel-iommu.c, the declaration of pci_find_upstream_pcie_bridge() has to move from drivers/pci/pci.h to include/linux/pci.h. This is handled in this patch, too. As suggested, also drop DMAR's EXPERIMENTAL tag while we're at it. Compile-tested on x86_64. Signed-off-by: Ohad Ben-Cohen Signed-off-by: Joerg Roedel --- arch/ia64/Kconfig | 21 ----------- arch/x86/Kconfig | 50 ------------------------- drivers/iommu/Kconfig | 49 ++++++++++++++++++++++++ drivers/iommu/Makefile | 2 + drivers/{pci => iommu}/dmar.c | 0 drivers/{pci => iommu}/intel-iommu.c | 1 - drivers/{pci => iommu}/intr_remapping.c | 1 - drivers/{pci => iommu}/intr_remapping.h | 0 drivers/{pci => iommu}/iova.c | 0 drivers/pci/Makefile | 5 --- drivers/pci/pci.h | 2 - include/linux/pci.h | 11 ++++++ 12 files changed, 62 insertions(+), 80 deletions(-) rename drivers/{pci => iommu}/dmar.c (100%) rename drivers/{pci => iommu}/intel-iommu.c (99%) rename drivers/{pci => iommu}/intr_remapping.c (99%) rename drivers/{pci => iommu}/intr_remapping.h (100%) rename drivers/{pci => iommu}/iova.c (100%) diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 9929e4e11ea0..7336ba653b8f 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -627,27 +627,6 @@ source "drivers/pci/hotplug/Kconfig" source "drivers/pcmcia/Kconfig" -config DMAR - bool "Support for DMA Remapping Devices (EXPERIMENTAL)" - depends on IA64_GENERIC && ACPI && EXPERIMENTAL - help - DMA remapping (DMAR) devices support enables independent address - translations for Direct Memory Access (DMA) from devices. - These DMA remapping devices are reported via ACPI tables - and include PCI device scope covered by these DMA - remapping devices. - -config DMAR_DEFAULT_ON - def_bool y - prompt "Enable DMA Remapping Devices by default" - depends on DMAR - help - Selecting this option will enable a DMAR device at boot time if - one is found. If this option is not selected, DMAR support can - be enabled by passing intel_iommu=on to the kernel. It is - recommended you say N here while the DMAR code remains - experimental. - endmenu endif diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 1b6a2e212db4..a169573c64fc 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1912,56 +1912,6 @@ config PCI_CNB20LE_QUIRK You should say N unless you know you need this. -config DMAR - bool "Support for DMA Remapping Devices (EXPERIMENTAL)" - depends on PCI_MSI && ACPI && EXPERIMENTAL - select IOMMU_API - help - DMA remapping (DMAR) devices support enables independent address - translations for Direct Memory Access (DMA) from devices. - These DMA remapping devices are reported via ACPI tables - and include PCI device scope covered by these DMA - remapping devices. - -config DMAR_DEFAULT_ON - def_bool y - prompt "Enable DMA Remapping Devices by default" - depends on DMAR - help - Selecting this option will enable a DMAR device at boot time if - one is found. If this option is not selected, DMAR support can - be enabled by passing intel_iommu=on to the kernel. It is - recommended you say N here while the DMAR code remains - experimental. - -config DMAR_BROKEN_GFX_WA - bool "Workaround broken graphics drivers (going away soon)" - depends on DMAR && BROKEN - ---help--- - Current Graphics drivers tend to use physical address - for DMA and avoid using DMA APIs. Setting this config - option permits the IOMMU driver to set a unity map for - all the OS-visible memory. Hence the driver can continue - to use physical addresses for DMA, at least until this - option is removed in the 2.6.32 kernel. - -config DMAR_FLOPPY_WA - def_bool y - depends on DMAR - ---help--- - Floppy disk drivers are known to bypass DMA API calls - thereby failing to work when IOMMU is enabled. This - workaround will setup a 1:1 mapping for the first - 16MiB to make floppy (an ISA device) work. - -config INTR_REMAP - bool "Support for Interrupt Remapping (EXPERIMENTAL)" - depends on X86_64 && X86_IO_APIC && PCI_MSI && ACPI && EXPERIMENTAL - ---help--- - Supports Interrupt remapping for IO-APIC and MSI devices. - To use x2apic mode in the CPU's which support x2APIC enhancements or - to support platforms with CPU's having > 8 bit APIC ID, say Y. - source "drivers/pci/pcie/Kconfig" source "drivers/pci/Kconfig" diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig index 9246c5bf25af..e2a5f141ae2d 100644 --- a/drivers/iommu/Kconfig +++ b/drivers/iommu/Kconfig @@ -46,3 +46,52 @@ config AMD_IOMMU_STATS statistics about whats happening in the driver and exports that information to userspace via debugfs. If unsure, say N. + +# Intel IOMMU support +config DMAR + bool "Support for DMA Remapping Devices" + depends on PCI_MSI && ACPI && (X86 || IA64_GENERIC) + select IOMMU_API + help + DMA remapping (DMAR) devices support enables independent address + translations for Direct Memory Access (DMA) from devices. + These DMA remapping devices are reported via ACPI tables + and include PCI device scope covered by these DMA + remapping devices. + +config DMAR_DEFAULT_ON + def_bool y + prompt "Enable DMA Remapping Devices by default" + depends on DMAR + help + Selecting this option will enable a DMAR device at boot time if + one is found. If this option is not selected, DMAR support can + be enabled by passing intel_iommu=on to the kernel. + +config DMAR_BROKEN_GFX_WA + bool "Workaround broken graphics drivers (going away soon)" + depends on DMAR && BROKEN && X86 + ---help--- + Current Graphics drivers tend to use physical address + for DMA and avoid using DMA APIs. Setting this config + option permits the IOMMU driver to set a unity map for + all the OS-visible memory. Hence the driver can continue + to use physical addresses for DMA, at least until this + option is removed in the 2.6.32 kernel. + +config DMAR_FLOPPY_WA + def_bool y + depends on DMAR && X86 + ---help--- + Floppy disk drivers are known to bypass DMA API calls + thereby failing to work when IOMMU is enabled. This + workaround will setup a 1:1 mapping for the first + 16MiB to make floppy (an ISA device) work. + +config INTR_REMAP + bool "Support for Interrupt Remapping (EXPERIMENTAL)" + depends on X86_64 && X86_IO_APIC && PCI_MSI && ACPI && EXPERIMENTAL + ---help--- + Supports Interrupt remapping for IO-APIC and MSI devices. + To use x2apic mode in the CPU's which support x2APIC enhancements or + to support platforms with CPU's having > 8 bit APIC ID, say Y. diff --git a/drivers/iommu/Makefile b/drivers/iommu/Makefile index 4237eaf84609..49e9c0f46bd5 100644 --- a/drivers/iommu/Makefile +++ b/drivers/iommu/Makefile @@ -1,3 +1,5 @@ obj-$(CONFIG_IOMMU_API) += iommu.o obj-$(CONFIG_MSM_IOMMU) += msm_iommu.o msm_iommu_dev.o obj-$(CONFIG_AMD_IOMMU) += amd_iommu.o +obj-$(CONFIG_DMAR) += dmar.o iova.o intel-iommu.o +obj-$(CONFIG_INTR_REMAP) += dmar.o intr_remapping.o diff --git a/drivers/pci/dmar.c b/drivers/iommu/dmar.c similarity index 100% rename from drivers/pci/dmar.c rename to drivers/iommu/dmar.c diff --git a/drivers/pci/intel-iommu.c b/drivers/iommu/intel-iommu.c similarity index 99% rename from drivers/pci/intel-iommu.c rename to drivers/iommu/intel-iommu.c index f02c34d26d1b..c621c98c99da 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/iommu/intel-iommu.c @@ -42,7 +42,6 @@ #include #include #include -#include "pci.h" #define ROOT_SIZE VTD_PAGE_SIZE #define CONTEXT_SIZE VTD_PAGE_SIZE diff --git a/drivers/pci/intr_remapping.c b/drivers/iommu/intr_remapping.c similarity index 99% rename from drivers/pci/intr_remapping.c rename to drivers/iommu/intr_remapping.c index 3607faf28a4d..1a89d4a2cadf 100644 --- a/drivers/pci/intr_remapping.c +++ b/drivers/iommu/intr_remapping.c @@ -13,7 +13,6 @@ #include "intr_remapping.h" #include #include -#include "pci.h" static struct ioapic_scope ir_ioapic[MAX_IO_APICS]; static struct hpet_scope ir_hpet[MAX_HPET_TBS]; diff --git a/drivers/pci/intr_remapping.h b/drivers/iommu/intr_remapping.h similarity index 100% rename from drivers/pci/intr_remapping.h rename to drivers/iommu/intr_remapping.h diff --git a/drivers/pci/iova.c b/drivers/iommu/iova.c similarity index 100% rename from drivers/pci/iova.c rename to drivers/iommu/iova.c diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 094308e41be5..825c02b40daa 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -29,11 +29,6 @@ obj-$(CONFIG_PCI_MSI) += msi.o # Build the Hypertransport interrupt support obj-$(CONFIG_HT_IRQ) += htirq.o -# Build Intel IOMMU support -obj-$(CONFIG_DMAR) += dmar.o iova.o intel-iommu.o - -obj-$(CONFIG_INTR_REMAP) += dmar.o intr_remapping.o - obj-$(CONFIG_PCI_IOV) += iov.o # diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 731e20265ace..b7bf11dd546a 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -184,8 +184,6 @@ pci_match_one_device(const struct pci_device_id *id, const struct pci_dev *dev) return NULL; } -struct pci_dev *pci_find_upstream_pcie_bridge(struct pci_dev *pdev); - /* PCI slot sysfs helper code */ #define to_pci_slot(s) container_of(s, struct pci_slot, kobj) diff --git a/include/linux/pci.h b/include/linux/pci.h index c446b5ca2d38..970bfe0941c3 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1589,5 +1589,16 @@ int pci_vpd_find_tag(const u8 *buf, unsigned int off, unsigned int len, u8 rdt); int pci_vpd_find_info_keyword(const u8 *buf, unsigned int off, unsigned int len, const char *kw); +/** + * pci_find_upstream_pcie_bridge - find upstream PCIe-to-PCI bridge of a device + * @pdev: the PCI device + * + * if the device is PCIE, return NULL + * if the device isn't connected to a PCIe bridge (that is its parent is a + * legacy PCI bridge and the bridge is directly connected to bus 0), return its + * parent + */ +struct pci_dev *pci_find_upstream_pcie_bridge(struct pci_dev *pdev); + #endif /* __KERNEL__ */ #endif /* LINUX_PCI_H */ -- GitLab