diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig index 6675c051f62fbe61f8533bc926dfe5c7242113e4..4ad0380ff806019d503ed2e9e2d21facc5f06b31 100644 --- a/arch/arm/mach-ep93xx/Kconfig +++ b/arch/arm/mach-ep93xx/Kconfig @@ -130,28 +130,28 @@ config MACH_MICRO9 bool config MACH_MICRO9H - bool "Support Contec Hypercontrol Micro9-H" + bool "Support Contec Micro9-High" depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET select MACH_MICRO9 help Say 'Y' here if you want your kernel to support the - Contec Hypercontrol Micro9-H board. + Contec Micro9-High board. config MACH_MICRO9M - bool "Support Contec Hypercontrol Micro9-M" - depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET + bool "Support Contec Micro9-Mid" + depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET select MACH_MICRO9 help Say 'Y' here if you want your kernel to support the - Contec Hypercontrol Micro9-M board. + Contec Micro9-Mid board. config MACH_MICRO9L - bool "Support Contec Hypercontrol Micro9-L" + bool "Support Contec Micro9-Lite" depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET select MACH_MICRO9 help Say 'Y' here if you want your kernel to support the - Contec Hypercontrol Micro9-L board. + Contec Micro9-Lite board. config MACH_TS72XX bool "Support Technologic Systems TS-72xx SBC" diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h index 0fbf87b163385296ee932644d54a6875cfd7bdc3..587756dbd6f6c0c4b1764877ce8e6224bdbf3248 100644 --- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h +++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h @@ -218,6 +218,17 @@ #define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV (1<<16) #define EP93XX_SYSCON_KEYTCHCLKDIV_KEN (1<<15) #define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV (1<<0) +#define EP93XX_SYSCON_SYSCFG EP93XX_SYSCON_REG(0x9c) +#define EP93XX_SYSCON_SYSCFG_REV_MASK (0xf0000000) +#define EP93XX_SYSCON_SYSCFG_REV_SHIFT (28) +#define EP93XX_SYSCON_SYSCFG_SBOOT (1<<8) +#define EP93XX_SYSCON_SYSCFG_LCSN7 (1<<7) +#define EP93XX_SYSCON_SYSCFG_LCSN6 (1<<6) +#define EP93XX_SYSCON_SYSCFG_LASDO (1<<5) +#define EP93XX_SYSCON_SYSCFG_LEEDA (1<<4) +#define EP93XX_SYSCON_SYSCFG_LEECLK (1<<3) +#define EP93XX_SYSCON_SYSCFG_LCSN2 (1<<1) +#define EP93XX_SYSCON_SYSCFG_LCSN1 (1<<0) #define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0) #define EP93XX_WATCHDOG_BASE EP93XX_APB_IOMEM(0x00140000) diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c index 72e7a7dfd7bf6b7b4cc494fb05e3bb1a227e2b9b..49fbee5adde2051831ea654d764ea47f738c158d 100644 --- a/arch/arm/mach-ep93xx/micro9.c +++ b/arch/arm/mach-ep93xx/micro9.c @@ -22,52 +22,77 @@ #include -static struct ep93xx_eth_data micro9_eth_data = { - .phy_id = 0x1f, -}; - -static void __init micro9_init(void) -{ - ep93xx_register_eth(µ9_eth_data, 1); -} - -/* - * Micro9-H - */ -#ifdef CONFIG_MACH_MICRO9H -static struct physmap_flash_data micro9h_flash_data = { - .width = 4, -}; +/************************************************************************* + * Micro9 NOR Flash + * + * Micro9-High has up to 64MB of 32-bit flash on CS1 + * Micro9-Mid has up to 64MB of either 32-bit or 16-bit flash on CS1 + * Micro9-Lite uses a seperate MTD map driver for flash support + *************************************************************************/ +static struct physmap_flash_data micro9_flash_data; -static struct resource micro9h_flash_resource = { +static struct resource micro9_flash_resource = { .start = EP93XX_CS1_PHYS_BASE, .end = EP93XX_CS1_PHYS_BASE + SZ_64M - 1, .flags = IORESOURCE_MEM, }; -static struct platform_device micro9h_flash = { +static struct platform_device micro9_flash = { .name = "physmap-flash", .id = 0, .dev = { - .platform_data = µ9h_flash_data, + .platform_data = µ9_flash_data, }, .num_resources = 1, - .resource = µ9h_flash_resource, + .resource = µ9_flash_resource, }; -static void __init micro9h_init(void) +static void __init __micro9_register_flash(unsigned int width) +{ + micro9_flash_data.width = width; + + platform_device_register(µ9_flash); +} + +static unsigned int __init micro9_detect_bootwidth(void) { - platform_device_register(µ9h_flash); + u32 v; + + /* Detect the bus width of the external flash memory */ + v = __raw_readl(EP93XX_SYSCON_SYSCFG); + if (v & EP93XX_SYSCON_SYSCFG_LCSN7) + return 4; /* 32-bit */ + else + return 2; /* 16-bit */ } -static void __init micro9h_init_machine(void) +static void __init micro9_register_flash(void) +{ + if (machine_is_micro9()) + __micro9_register_flash(4); + else if (machine_is_micro9m()) + __micro9_register_flash(micro9_detect_bootwidth()); +} + + +/************************************************************************* + * Micro9 Ethernet + *************************************************************************/ +static struct ep93xx_eth_data micro9_eth_data = { + .phy_id = 0x1f, +}; + + +static void __init micro9_init_machine(void) { ep93xx_init_devices(); - micro9_init(); - micro9h_init(); + ep93xx_register_eth(µ9_eth_data, 1); + micro9_register_flash(); } -MACHINE_START(MICRO9, "Contec Hypercontrol Micro9-H") + +#ifdef CONFIG_MACH_MICRO9H +MACHINE_START(MICRO9, "Contec Micro9-High") /* Maintainer: Hubert Feurstein */ .phys_io = EP93XX_APB_PHYS_BASE, .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, @@ -75,43 +100,25 @@ MACHINE_START(MICRO9, "Contec Hypercontrol Micro9-H") .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, - .init_machine = micro9h_init_machine, + .init_machine = micro9_init_machine, MACHINE_END #endif -/* - * Micro9-M - */ #ifdef CONFIG_MACH_MICRO9M -static void __init micro9m_init_machine(void) -{ - ep93xx_init_devices(); - micro9_init(); -} - -MACHINE_START(MICRO9M, "Contec Hypercontrol Micro9-M") +MACHINE_START(MICRO9M, "Contec Micro9-Mid") /* Maintainer: Hubert Feurstein */ .phys_io = EP93XX_APB_PHYS_BASE, .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .boot_params = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, - .init_machine = micro9m_init_machine, + .init_machine = micro9_init_machine, MACHINE_END #endif -/* - * Micro9-L - */ #ifdef CONFIG_MACH_MICRO9L -static void __init micro9l_init_machine(void) -{ - ep93xx_init_devices(); - micro9_init(); -} - -MACHINE_START(MICRO9L, "Contec Hypercontrol Micro9-L") +MACHINE_START(MICRO9L, "Contec Micro9-Lite") /* Maintainer: Hubert Feurstein */ .phys_io = EP93XX_APB_PHYS_BASE, .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, @@ -119,7 +126,6 @@ MACHINE_START(MICRO9L, "Contec Hypercontrol Micro9-L") .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, - .init_machine = micro9l_init_machine, + .init_machine = micro9_init_machine, MACHINE_END #endif -