diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 98ed4d96987c87fda074a219a234cbf8e48f2b9a..55f75aea283cf72f067706c54fda4190c1c1da27 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -18,7 +18,7 @@ obj-$(CONFIG_MII) += mii.o obj-$(CONFIG_MDIO) += mdio.o obj-$(CONFIG_NET) += Space.o loopback.o obj-$(CONFIG_NETCONSOLE) += netconsole.o -obj-$(CONFIG_PHYLIB) += phy/ +obj-$(CONFIG_MDIO_DEVICE) += phy/ obj-$(CONFIG_RIONET) += rionet.o obj-$(CONFIG_NET_TEAM) += team/ obj-$(CONFIG_TUN) += tun.o diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 8dbd59baa34d5ed9eda97396f38b5ab38e96416a..60ffc9da6a286272d84e8dc3f4326eb908e7961a 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -2,33 +2,12 @@ # PHY Layer Configuration # -menuconfig PHYLIB - tristate "PHY Device support and infrastructure" - depends on NETDEVICES +menuconfig MDIO_DEVICE + tristate "MDIO bus device drivers" help - Ethernet controllers are usually attached to PHY - devices. This option provides infrastructure for - managing PHY devices. - -if PHYLIB + MDIO devices and driver infrastructure code. -config SWPHY - bool - -config LED_TRIGGER_PHY - bool "Support LED triggers for tracking link state" - depends on LEDS_TRIGGERS - ---help--- - Adds support for a set of LED trigger events per-PHY. Link - state change will trigger the events, for consumption by an - LED class driver. There are triggers for each link speed currently - supported by the phy, and are of the form: - :: - - Where speed is in the form: - Mbps or Gbps - -comment "MDIO bus device drivers" +if MDIO_DEVICE config MDIO_BCM_IPROC tristate "Broadcom iProc MDIO bus controller" @@ -40,7 +19,7 @@ config MDIO_BCM_IPROC config MDIO_BCM_UNIMAC tristate "Broadcom UniMAC MDIO bus controller" - depends on HAS_IOMEM + depends on HAS_IOMEM && OF_MDIO help This module provides a driver for the Broadcom UniMAC MDIO busses. This hardware can be found in the Broadcom GENET Ethernet MAC @@ -49,6 +28,7 @@ config MDIO_BCM_UNIMAC config MDIO_BITBANG tristate "Bitbanged MDIO buses" + depends on !(MDIO_DEVICE=y && PHYLIB=m) help This module implements the MDIO bus protocol in software, for use by low level drivers that export the ability to @@ -160,6 +140,36 @@ config MDIO_XGENE This module provides a driver for the MDIO busses found in the APM X-Gene SoC's. +endif + +menuconfig PHYLIB + tristate "PHY Device support and infrastructure" + depends on NETDEVICES + select MDIO_DEVICE + help + Ethernet controllers are usually attached to PHY + devices. This option provides infrastructure for + managing PHY devices. + +if PHYLIB + +config SWPHY + bool + +config LED_TRIGGER_PHY + bool "Support LED triggers for tracking link state" + depends on LEDS_TRIGGERS + ---help--- + Adds support for a set of LED trigger events per-PHY. Link + state change will trigger the events, for consumption by an + LED class driver. There are triggers for each link speed currently + supported by the phy, and are of the form: + :: + + Where speed is in the form: + Mbps or Gbps + + comment "MII PHY device drivers" config AMD_PHY diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index 82d9156146468c97f22f2ea36b69ff8989b4e506..0e1ec0438c23eb334ea6e68854d0b1254b006cf1 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -1,7 +1,16 @@ # Makefile for Linux PHY drivers and MDIO bus drivers -libphy-y := phy.o phy_device.o mdio_bus.o mdio_device.o \ - mdio-boardinfo.o phy-core.o +libphy-y := phy.o phy-core.o phy_device.o +mdio-bus-y += mdio_bus.o mdio_device.o mdio-boardinfo.o + +# PHYLIB implies MDIO_DEVICE, in that case, we have a bunch of circular +# dependencies that does not make it possible to split mdio-bus objects into a +# dedicated loadable module, so we bundle them all together into libphy.ko +ifdef CONFIG_PHYLIB +libphy-y += $(mdio-bus-y) +else +obj-$(CONFIG_MDIO_DEVICE) += mdio-bus.o +endif libphy-$(CONFIG_SWPHY) += swphy.o libphy-$(CONFIG_LED_TRIGGER_PHY) += phy_led_triggers.o diff --git a/drivers/net/phy/mdio-boardinfo.c b/drivers/net/phy/mdio-boardinfo.c index 6b988f77da08fca5ba9e7efec8c4af354ad51ecc..61941e29daae85abe7cc8a5726d669eae3d29137 100644 --- a/drivers/net/phy/mdio-boardinfo.c +++ b/drivers/net/phy/mdio-boardinfo.c @@ -84,3 +84,4 @@ int mdiobus_register_board_info(const struct mdio_board_info *info, return 0; } +EXPORT_SYMBOL(mdiobus_register_board_info); diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index fa7d51f14869efa8b94ce161e5bd4cb96b4951d3..46b468eb6e12def44281b2b5c973427beabb93f7 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -648,9 +648,18 @@ int __init mdio_bus_init(void) return ret; } +EXPORT_SYMBOL_GPL(mdio_bus_init); +#if IS_ENABLED(CONFIG_PHYLIB) void mdio_bus_exit(void) { class_unregister(&mdio_bus_class); bus_unregister(&mdio_bus_type); } +EXPORT_SYMBOL_GPL(mdio_bus_exit); +#else +module_init(mdio_bus_init); +/* no module_exit, intentional */ +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("MDIO bus/device layer"); +#endif diff --git a/include/linux/of_mdio.h b/include/linux/of_mdio.h index a58cca8bcb29d8c9bdcda71538cfa8f25c913916..ba35ba5204871a69b5d5522f170432d24aa32e96 100644 --- a/include/linux/of_mdio.h +++ b/include/linux/of_mdio.h @@ -12,7 +12,7 @@ #include #include -#ifdef CONFIG_OF +#if IS_ENABLED(CONFIG_OF_MDIO) extern int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np); extern struct phy_device *of_phy_find_device(struct device_node *phy_np); extern struct phy_device *of_phy_connect(struct net_device *dev, @@ -32,7 +32,7 @@ extern int of_phy_register_fixed_link(struct device_node *np); extern void of_phy_deregister_fixed_link(struct device_node *np); extern bool of_phy_is_fixed_link(struct device_node *np); -#else /* CONFIG_OF */ +#else /* CONFIG_OF_MDIO */ static inline int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np) { /* diff --git a/include/linux/phy.h b/include/linux/phy.h index 2efca6b39fbad087217f78af18be061bdc46ddff..624cecf69c28d39b148b6d0616842fcf40317473 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -745,8 +745,24 @@ int phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val); struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id, bool is_c45, struct phy_c45_device_ids *c45_ids); +#if IS_ENABLED(CONFIG_PHYLIB) struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45); int phy_device_register(struct phy_device *phy); +void phy_device_free(struct phy_device *phydev); +#else +static inline +struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45) +{ + return NULL; +} + +static inline int phy_device_register(struct phy_device *phy) +{ + return 0; +} + +static inline void phy_device_free(struct phy_device *phydev) { } +#endif /* CONFIG_PHYLIB */ void phy_device_remove(struct phy_device *phydev); int phy_init_hw(struct phy_device *phydev); int phy_suspend(struct phy_device *phydev); @@ -827,7 +843,6 @@ int phy_ethtool_ksettings_set(struct phy_device *phydev, int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd); int phy_start_interrupts(struct phy_device *phydev); void phy_print_status(struct phy_device *phydev); -void phy_device_free(struct phy_device *phydev); int phy_set_max_speed(struct phy_device *phydev, u32 max_speed); int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask, @@ -854,8 +869,10 @@ int phy_ethtool_set_link_ksettings(struct net_device *ndev, const struct ethtool_link_ksettings *cmd); int phy_ethtool_nway_reset(struct net_device *ndev); +#if IS_ENABLED(CONFIG_PHYLIB) int __init mdio_bus_init(void); void mdio_bus_exit(void); +#endif extern struct bus_type mdio_bus_type; @@ -866,7 +883,7 @@ struct mdio_board_info { const void *platform_data; }; -#if IS_ENABLED(CONFIG_PHYLIB) +#if IS_ENABLED(CONFIG_MDIO_DEVICE) int mdiobus_register_board_info(const struct mdio_board_info *info, unsigned int n); #else