Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
提交 11e358bf 编写于 作者: D Daniel Scheller 提交者： Mauro Carvalho Chehab
浏览文件
操作

media: ddbridge: use dev_* macros in favor of printk 

Side effect: KERN_DEBUG messages aren't written to the kernel log anymore.
This also improves the tda18212_ping reporting a bit so users know that if
pinging wasn't successful, bad things will happen.

Since in module_init_ddbridge() there's no dev yet, pr_info is used
instead.
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
上级 d52786dd
显示空白变更内容
内联 并排
Showing with 46 addition and 32 deletion
drivers/media/pci/ddbridge/ddbridge-core.c
浏览文件 @ 11e358bf
......@@ -17,6 +17,8 @@
* http://www.gnu.org/copyleft/gpl.html
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
......@@ -137,10 +139,10 @@ static int ddb_i2c_cmd(struct ddb_i2c *i2c, u32 adr, u32 cmd)
ddbwritel((adr << 9) | cmd, i2c->regs + I2C_COMMAND);
stat = wait_event_timeout(i2c->wq, i2c->done == 1, HZ);
if (stat == 0) {
printk(KERN_ERR "I2C timeout\n");
dev_err(&dev->pdev->dev, "I2C timeout\n");
{ /* MSI debugging*/
u32 istat = ddbreadl(INTERRUPT_STATUS);
printk(KERN_ERR "IRS %08x\n", istat);
dev_err(&dev->pdev->dev, "IRS %08x\n", istat);
ddbwritel(istat, INTERRUPT_ACK);
}
return -EIO;
......@@ -546,7 +548,7 @@ static u32 ddb_input_avail(struct ddb_input *input)
off = (stat & 0x7ff) << 7;
if (ctrl & 4) {
printk(KERN_ERR "IA %d %d %08x\n", idx, off, ctrl);
dev_err(&dev->pdev->dev, "IA %d %d %08x\n", idx, off, ctrl);
ddbwritel(input->stat, DMA_BUFFER_ACK(input->nr));
return 0;
}
......@@ -624,6 +626,7 @@ static int demod_attach_drxk(struct ddb_input *input)
struct i2c_adapter *i2c = &input->port->i2c->adap;
struct dvb_frontend *fe;
struct drxk_config config;
struct device *dev = &input->port->dev->pdev->dev;
memset(&config, 0, sizeof(config));
config.microcode_name = "drxk_a3.mc";
......@@ -632,7 +635,7 @@ static int demod_attach_drxk(struct ddb_input *input)
fe = input->fe = dvb_attach(drxk_attach, &config, i2c);
if (!input->fe) {
printk(KERN_ERR "No DRXK found!\n");
dev_err(dev, "No DRXK found!\n");
return -ENODEV;
}
fe->sec_priv = input;
......@@ -645,12 +648,13 @@ static int tuner_attach_tda18271(struct ddb_input *input)
{
struct i2c_adapter *i2c = &input->port->i2c->adap;
struct dvb_frontend *fe;
struct device *dev = &input->port->dev->pdev->dev;
if (input->fe->ops.i2c_gate_ctrl)
input->fe->ops.i2c_gate_ctrl(input->fe, 1);
fe = dvb_attach(tda18271c2dd_attach, input->fe, i2c, 0x60);
if (!fe) {
printk(KERN_ERR "No TDA18271 found!\n");
dev_err(dev, "No TDA18271 found!\n");
return -ENODEV;
}
if (input->fe->ops.i2c_gate_ctrl)
......@@ -683,13 +687,14 @@ static struct stv0367_config ddb_stv0367_config[] = {
static int demod_attach_stv0367(struct ddb_input *input)
{
struct i2c_adapter *i2c = &input->port->i2c->adap;
struct device *dev = &input->port->dev->pdev->dev;
/* attach frontend */
input->fe = dvb_attach(stv0367ddb_attach,
&ddb_stv0367_config[(input->nr & 1)], i2c);
if (!input->fe) {
printk(KERN_ERR "stv0367ddb_attach failed (not found?)\n");
dev_err(dev, "stv0367ddb_attach failed (not found?)\n");
return -ENODEV;
}
......@@ -703,17 +708,19 @@ static int demod_attach_stv0367(struct ddb_input *input)
static int tuner_tda18212_ping(struct ddb_input *input, unsigned short adr)
{
struct i2c_adapter *adapter = &input->port->i2c->adap;
struct device *dev = &input->port->dev->pdev->dev;
u8 tda_id[2];
u8 subaddr = 0x00;
printk(KERN_DEBUG "stv0367-tda18212 tuner ping\n");
dev_dbg(dev, "stv0367-tda18212 tuner ping\n");
if (input->fe->ops.i2c_gate_ctrl)
input->fe->ops.i2c_gate_ctrl(input->fe, 1);
if (i2c_read_regs(adapter, adr, subaddr, tda_id, sizeof(tda_id)) < 0)
printk(KERN_DEBUG "tda18212 ping 1 fail\n");
dev_dbg(dev, "tda18212 ping 1 fail\n");
if (i2c_read_regs(adapter, adr, subaddr, tda_id, sizeof(tda_id)) < 0)
printk(KERN_DEBUG "tda18212 ping 2 fail\n");
dev_warn(dev, "tda18212 ping failed, expect problems\n");
if (input->fe->ops.i2c_gate_ctrl)
input->fe->ops.i2c_gate_ctrl(input->fe, 0);
......@@ -724,6 +731,7 @@ static int tuner_tda18212_ping(struct ddb_input *input, unsigned short adr)
static int demod_attach_cxd28xx(struct ddb_input *input, int par, int osc24)
{
struct i2c_adapter *i2c = &input->port->i2c->adap;
struct device *dev = &input->port->dev->pdev->dev;
struct cxd2841er_config cfg;
/* the cxd2841er driver expects 8bit/shifted I2C addresses */
......@@ -741,7 +749,7 @@ static int demod_attach_cxd28xx(struct ddb_input *input, int par, int osc24)
input->fe = dvb_attach(cxd2841er_attach_t_c, &cfg, i2c);
if (!input->fe) {
printk(KERN_ERR "No Sony CXD28xx found!\n");
dev_err(dev, "No Sony CXD28xx found!\n");
return -ENODEV;
}
......@@ -755,6 +763,7 @@ static int demod_attach_cxd28xx(struct ddb_input *input, int par, int osc24)
static int tuner_attach_tda18212(struct ddb_input *input, u32 porttype)
{
struct i2c_adapter *adapter = &input->port->i2c->adap;
struct device *dev = &input->port->dev->pdev->dev;
struct i2c_client *client;
struct tda18212_config config = {
.fe = input->fe,
......@@ -799,7 +808,7 @@ static int tuner_attach_tda18212(struct ddb_input *input, u32 porttype)
return 0;
err:
printk(KERN_INFO "TDA18212 tuner not found. Device is not fully operational.\n");
dev_warn(dev, "TDA18212 tuner not found. Device is not fully operational.\n");
return -ENODEV;
}
......@@ -860,19 +869,20 @@ static struct stv6110x_config stv6110b = {
static int demod_attach_stv0900(struct ddb_input *input, int type)
{
struct i2c_adapter *i2c = &input->port->i2c->adap;
struct device *dev = &input->port->dev->pdev->dev;
struct stv090x_config *feconf = type ? &stv0900_aa : &stv0900;
input->fe = dvb_attach(stv090x_attach, feconf, i2c,
(input->nr & 1) ? STV090x_DEMODULATOR_1
: STV090x_DEMODULATOR_0);
if (!input->fe) {
printk(KERN_ERR "No STV0900 found!\n");
dev_err(dev, "No STV0900 found!\n");
return -ENODEV;
}
if (!dvb_attach(lnbh24_attach, input->fe, i2c, 0,
0, (input->nr & 1) ?
(0x09 - type) : (0x0b - type))) {
printk(KERN_ERR "No LNBH24 found!\n");
dev_err(dev, "No LNBH24 found!\n");
return -ENODEV;
}
return 0;
......@@ -881,6 +891,7 @@ static int demod_attach_stv0900(struct ddb_input *input, int type)
static int tuner_attach_stv6110(struct ddb_input *input, int type)
{
struct i2c_adapter *i2c = &input->port->i2c->adap;
struct device *dev = &input->port->dev->pdev->dev;
struct stv090x_config *feconf = type ? &stv0900_aa : &stv0900;
struct stv6110x_config *tunerconf = (input->nr & 1) ?
&stv6110b : &stv6110a;
......@@ -888,10 +899,10 @@ static int tuner_attach_stv6110(struct ddb_input *input, int type)
ctl = dvb_attach(stv6110x_attach, input->fe, tunerconf, i2c);
if (!ctl) {
printk(KERN_ERR "No STV6110X found!\n");
dev_err(dev, "No STV6110X found!\n");
return -ENODEV;
}
printk(KERN_INFO "attach tuner input %d adr %02x\n",
dev_info(dev, "attach tuner input %d adr %02x\n",
input->nr, tunerconf->addr);
feconf->tuner_init = ctl->tuner_init;
......@@ -1022,13 +1033,14 @@ static int dvb_input_attach(struct ddb_input *input)
struct ddb_port *port = input->port;
struct dvb_adapter *adap = &input->adap;
struct dvb_demux *dvbdemux = &input->demux;
struct device *dev = &input->port->dev->pdev->dev;
int sony_osc24 = 0, sony_tspar = 0;
ret = dvb_register_adapter(adap, "DDBridge", THIS_MODULE,
&input->port->dev->pdev->dev,
adapter_nr);
if (ret < 0) {
printk(KERN_ERR "ddbridge: Could not register adapter.Check if you enabled enough adapters in dvb-core!\n");
dev_err(dev, "Could not register adapter. Check if you enabled enough adapters in dvb-core!\n");
return ret;
}
input->attached = 1;
......@@ -1254,7 +1266,7 @@ static void input_tasklet(unsigned long data)
if (input->port->class == DDB_PORT_TUNER) {
if (4&ddbreadl(DMA_BUFFER_CONTROL(input->nr)))
printk(KERN_ERR "Overflow input %d\n", input->nr);
dev_err(&dev->pdev->dev, "Overflow input %d\n", input->nr);
while (input->cbuf != ((input->stat >> 11) & 0x1f)
|| (4 & safe_ddbreadl(dev, DMA_BUFFER_CONTROL(input->nr)))) {
dvb_dmx_swfilter_packets(&input->demux,
......@@ -1323,6 +1335,7 @@ static int ddb_ci_attach(struct ddb_port *port)
static int ddb_port_attach(struct ddb_port *port)
{
struct device *dev = &port->dev->pdev->dev;
int ret = 0;
switch (port->class) {
......@@ -1339,7 +1352,7 @@ static int ddb_port_attach(struct ddb_port *port)
break;
}
if (ret < 0)
printk(KERN_ERR "port_attach on port %d failed\n", port->nr);
dev_err(dev, "port_attach on port %d failed\n", port->nr);
return ret;
}
......@@ -1390,6 +1403,7 @@ static void ddb_ports_detach(struct ddb *dev)
static int init_xo2(struct ddb_port *port)
{
struct i2c_adapter *i2c = &port->i2c->adap;
struct device *dev = &port->dev->pdev->dev;
u8 val, data[2];
int res;
......@@ -1398,7 +1412,7 @@ static int init_xo2(struct ddb_port *port)
return res;
if (data[0] != 0x01) {
pr_info("Port %d: invalid XO2\n", port->nr);
dev_info(dev, "Port %d: invalid XO2\n", port->nr);
return -1;
}
......@@ -1524,7 +1538,7 @@ static void ddb_port_probe(struct ddb_port *port)
port->class = DDB_PORT_CI;
ddbwritel(I2C_SPEED_400, port->i2c->regs + I2C_TIMING);
} else if (port_has_xo2(port, &xo2_type, &xo2_id)) {
printk(KERN_INFO "Port %d (TAB %d): XO2 type: %d, id: %d\n",
dev_dbg(&dev->pdev->dev, "Port %d (TAB %d): XO2 type: %d, id: %d\n",
port->nr, port->nr+1, xo2_type, xo2_id);
ddbwritel(I2C_SPEED_400, port->i2c->regs + I2C_TIMING);
......@@ -1569,10 +1583,10 @@ static void ddb_port_probe(struct ddb_port *port)
}
break;
case DDB_XO2_TYPE_CI:
printk(KERN_INFO "DuoFlex CI modules not supported\n");
dev_info(&dev->pdev->dev, "DuoFlex CI modules not supported\n");
break;
default:
printk(KERN_INFO "Unknown XO2 DuoFlex module\n");
dev_info(&dev->pdev->dev, "Unknown XO2 DuoFlex module\n");
break;
}
} else if (port_has_cxd28xx(port, &cxd_id)) {
......@@ -1624,7 +1638,7 @@ static void ddb_port_probe(struct ddb_port *port)
ddbwritel(I2C_SPEED_100, port->i2c->regs + I2C_TIMING);
}
printk(KERN_INFO "Port %d (TAB %d): %s\n",
dev_info(&dev->pdev->dev, "Port %d (TAB %d): %s\n",
port->nr, port->nr+1, modname);
}
......@@ -2006,7 +2020,7 @@ static int ddb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
dev->pdev = pdev;
pci_set_drvdata(pdev, dev);
dev->info = (struct ddb_info *) id->driver_data;
printk(KERN_INFO "DDBridge driver detected: %s\n", dev->info->name);
dev_info(&pdev->dev, "Detected %s\n", dev->info->name);
dev->regs = ioremap(pci_resource_start(dev->pdev, 0),
pci_resource_len(dev->pdev, 0));
......@@ -2014,13 +2028,13 @@ static int ddb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
stat = -ENOMEM;
goto fail;
}
printk(KERN_INFO "HW %08x FW %08x\n", ddbreadl(0), ddbreadl(4));
dev_info(&pdev->dev, "HW %08x FW %08x\n", ddbreadl(0), ddbreadl(4));
#ifdef CONFIG_PCI_MSI
if (pci_msi_enabled())
stat = pci_enable_msi(dev->pdev);
if (stat) {
printk(KERN_INFO ": MSI not available.\n");
dev_info(&pdev->dev, "MSI not available.\n");
} else {
irq_flag = 0;
dev->msi = 1;
......@@ -2053,7 +2067,7 @@ static int ddb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
goto fail1;
ddb_ports_init(dev);
if (ddb_buffers_alloc(dev) < 0) {
printk(KERN_INFO ": Could not allocate buffer memory\n");
dev_err(&pdev->dev, "Could not allocate buffer memory\n");
goto fail2;
}
if (ddb_ports_attach(dev) < 0)
......@@ -2063,19 +2077,19 @@ static int ddb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
fail3:
ddb_ports_detach(dev);
printk(KERN_ERR "fail3\n");
dev_err(&pdev->dev, "fail3\n");
ddb_ports_release(dev);
fail2:
printk(KERN_ERR "fail2\n");
dev_err(&pdev->dev, "fail2\n");
ddb_buffers_free(dev);
fail1:
printk(KERN_ERR "fail1\n");
dev_err(&pdev->dev, "fail1\n");
if (dev->msi)
pci_disable_msi(dev->pdev);
if (stat == 0)
free_irq(dev->pdev->irq, dev);
fail:
printk(KERN_ERR "fail\n");
dev_err(&pdev->dev, "fail\n");
ddb_unmap(dev);
pci_set_drvdata(pdev, NULL);
pci_disable_device(pdev);
......@@ -2255,7 +2269,7 @@ static __init int module_init_ddbridge(void)
{
int ret;
printk(KERN_INFO "Digital Devices PCIE bridge driver, Copyright (C) 2010-11 Digital Devices GmbH\n");
pr_info("Digital Devices PCIE bridge driver, Copyright (C) 2010-11 Digital Devices GmbH\n");
ret = ddb_class_create();
if (ret < 0)
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或