From 0d414268fb8d0844030f87027e904f69d96706be Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 30 Nov 2016 23:57:56 -0600 Subject: [PATCH] PCI: thunder-pem: Factor out resource lookup Pull the register resource lookup out of thunder_pem_init() so we can easily add a corresponding lookup using ACPI. No functional change intended. Signed-off-by: Bjorn Helgaas --- drivers/pci/host/pci-thunder-pem.c | 50 ++++++++++++++++-------------- 1 file changed, 27 insertions(+), 23 deletions(-) diff --git a/drivers/pci/host/pci-thunder-pem.c b/drivers/pci/host/pci-thunder-pem.c index 6abaf80ffb39..c3276eede82a 100644 --- a/drivers/pci/host/pci-thunder-pem.c +++ b/drivers/pci/host/pci-thunder-pem.c @@ -284,35 +284,16 @@ static int thunder_pem_config_write(struct pci_bus *bus, unsigned int devfn, return pci_generic_config_write(bus, devfn, where, size, val); } -static int thunder_pem_init(struct pci_config_window *cfg) +static int thunder_pem_init(struct device *dev, struct pci_config_window *cfg, + struct resource *res_pem) { - struct device *dev = cfg->parent; - resource_size_t bar4_start; - struct resource *res_pem; struct thunder_pem_pci *pem_pci; - struct platform_device *pdev; - - /* Only OF support for now */ - if (!dev->of_node) - return -EINVAL; + resource_size_t bar4_start; pem_pci = devm_kzalloc(dev, sizeof(*pem_pci), GFP_KERNEL); if (!pem_pci) return -ENOMEM; - pdev = to_platform_device(dev); - - /* - * The second register range is the PEM bridge to the PCIe - * bus. It has a different config access method than those - * devices behind the bridge. - */ - res_pem = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (!res_pem) { - dev_err(dev, "missing \"reg[1]\"property\n"); - return -EINVAL; - } - pem_pci->pem_reg_base = devm_ioremap(dev, res_pem->start, 0x10000); if (!pem_pci->pem_reg_base) return -ENOMEM; @@ -332,9 +313,32 @@ static int thunder_pem_init(struct pci_config_window *cfg) return 0; } +static int thunder_pem_platform_init(struct pci_config_window *cfg) +{ + struct device *dev = cfg->parent; + struct platform_device *pdev = to_platform_device(dev); + struct resource *res_pem; + + if (!dev->of_node) + return -EINVAL; + + /* + * The second register range is the PEM bridge to the PCIe + * bus. It has a different config access method than those + * devices behind the bridge. + */ + res_pem = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!res_pem) { + dev_err(dev, "missing \"reg[1]\"property\n"); + return -EINVAL; + } + + return thunder_pem_init(dev, cfg, res_pem); +} + static struct pci_ecam_ops pci_thunder_pem_ops = { .bus_shift = 24, - .init = thunder_pem_init, + .init = thunder_pem_platform_init, .pci_ops = { .map_bus = pci_ecam_map_bus, .read = thunder_pem_config_read, -- GitLab