rapidio: fix default routing initialization

Fix switch initialization to ensure that all switches have default routing
disabled.  This guarantees that no unexpected RapidIO packets arrive to
the default port set by reset and there is no default routing destination
until it is properly configured by software.

This update also unifies handling of unmapped destinations by tsi57x, IDT
Gen1 and IDT Gen2 switches.
Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Cc: <stable@kernel.org>		[2.6.37+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

drivers/rapidio/switches/idt_gen2.c

@@ -95,6 +95,9 @@ idtg2_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
 	else
 		table++;
 
+	if (route_port == RIO_INVALID_ROUTE)
+		route_port = IDT_DEFAULT_ROUTE;
+
 	rio_mport_write_config_32(mport, destid, hopcount,
 				  LOCAL_RTE_CONF_DESTID_SEL, table);
 
@@ -411,6 +414,12 @@ static int idtg2_switch_init(struct rio_dev *rdev, int do_enum)
 	rdev->rswitch->em_handle = idtg2_em_handler;
 	rdev->rswitch->sw_sysfs = idtg2_sysfs;
 
+	if (do_enum) {
+		/* Ensure that default routing is disabled on startup */
+		rio_write_config_32(rdev,
+				    RIO_STD_RTE_DEFAULT_PORT, IDT_NO_ROUTE);
+	}
+
 	return 0;
 }
 

drivers/rapidio/switches/idtcps.c

@@ -26,6 +26,9 @@ idtcps_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
 {
 	u32 result;
 
+	if (route_port == RIO_INVALID_ROUTE)
+		route_port = CPS_DEFAULT_ROUTE;
+
 	if (table == RIO_GLOBAL_TABLE) {
 		rio_mport_write_config_32(mport, destid, hopcount,
 				RIO_STD_RTE_CONF_DESTID_SEL_CSR, route_destid);
@@ -130,6 +133,9 @@ static int idtcps_switch_init(struct rio_dev *rdev, int do_enum)
 		/* set TVAL = ~50us */
 		rio_write_config_32(rdev,
 			rdev->phys_efptr + RIO_PORT_LINKTO_CTL_CSR, 0x8e << 8);
+		/* Ensure that default routing is disabled on startup */
+		rio_write_config_32(rdev,
+				    RIO_STD_RTE_DEFAULT_PORT, CPS_NO_ROUTE);
 	}
 
 	return 0;

drivers/rapidio/switches/tsi57x.c

@@ -303,6 +303,12 @@ static int tsi57x_switch_init(struct rio_dev *rdev, int do_enum)
 	rdev->rswitch->em_init = tsi57x_em_init;
 	rdev->rswitch->em_handle = tsi57x_em_handler;
 
+	if (do_enum) {
+		/* Ensure that default routing is disabled on startup */
+		rio_write_config_32(rdev, RIO_STD_RTE_DEFAULT_PORT,
+				    RIO_INVALID_ROUTE);
+	}
+
 	return 0;
 }