From 0aeac458d9ebea5f0dc483e2d3f2c06bfa520c02 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 25 Apr 2011 22:38:37 +0900 Subject: [PATCH] clocksource: sh_tmu: __clocksource_updatefreq_hz() update This patch updates the clocksource part of the TMU driver to make use of the __clocksource_updatefreq_hz() function. Without this patch the old code uses clocksource_register() together with a hack that assumes a never changing clock rate (see clk_enable(), clk_get_rate() and clk_disable()). The patch uses clocksource_register_hz() with 1 Hz as initial value, then lets the ->enable() callback update the value with __clocksource_updatefreq_hz() once the struct clk has been enabled and the frequency is stable. Signed-off-by: Magnus Damm Acked-by: John Stultz Signed-off-by: Paul Mundt --- drivers/clocksource/sh_tmu.c | 19 ++++++++----------- 1 file changed, 8 insertions(+), 11 deletions(-) diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c index 36aba9923060..808135768617 100644 --- a/drivers/clocksource/sh_tmu.c +++ b/drivers/clocksource/sh_tmu.c @@ -199,8 +199,12 @@ static cycle_t sh_tmu_clocksource_read(struct clocksource *cs) static int sh_tmu_clocksource_enable(struct clocksource *cs) { struct sh_tmu_priv *p = cs_to_sh_tmu(cs); + int ret; - return sh_tmu_enable(p); + ret = sh_tmu_enable(p); + if (!ret) + __clocksource_updatefreq_hz(cs, p->rate); + return ret; } static void sh_tmu_clocksource_disable(struct clocksource *cs) @@ -221,17 +225,10 @@ static int sh_tmu_register_clocksource(struct sh_tmu_priv *p, cs->mask = CLOCKSOURCE_MASK(32); cs->flags = CLOCK_SOURCE_IS_CONTINUOUS; - /* clk_get_rate() needs an enabled clock */ - clk_enable(p->clk); - /* channel will be configured at parent clock / 4 */ - p->rate = clk_get_rate(p->clk) / 4; - clk_disable(p->clk); - /* TODO: calculate good shift from rate and counter bit width */ - cs->shift = 10; - cs->mult = clocksource_hz2mult(p->rate, cs->shift); - dev_info(&p->pdev->dev, "used as clock source\n"); - clocksource_register(cs); + + /* Register with dummy 1 Hz value, gets updated in ->enable() */ + clocksource_register_hz(cs, 1); return 0; } -- GitLab