提交 0ae997dc 编写于 作者: Y Yacine Belkadi 提交者: Johannes Berg

{cfg,mac}80211.h: fix some kernel-doc warnings

When building the 80211 DocBook, scripts/kernel-doc reports
the following type of warnings:

Warning(include/net/cfg80211.h:334): No description found for return value of 'cfg80211_get_chandef_type'

These warnings are only reported when scripts/kernel-doc
runs in verbose mode.

To fix these use "Return:" to describe function return values.
Signed-off-by: NYacine Belkadi <yacine.belkadi.1@gmail.com>
[adjust for freq_reg_info() change]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
上级 0c0280bd
......@@ -326,7 +326,7 @@ struct cfg80211_chan_def {
* cfg80211_get_chandef_type - return old channel type from chandef
* @chandef: the channel definition
*
* Returns the old channel type (NOHT, HT20, HT40+/-) from a given
* Return: The old channel type (NOHT, HT20, HT40+/-) from a given
* chandef, which must have a bandwidth allowing this conversion.
*/
static inline enum nl80211_channel_type
......@@ -364,7 +364,7 @@ void cfg80211_chandef_create(struct cfg80211_chan_def *chandef,
* @chandef1: first channel definition
* @chandef2: second channel definition
*
* Returns %true if the channels defined by the channel definitions are
* Return: %true if the channels defined by the channel definitions are
* identical, %false otherwise.
*/
static inline bool
......@@ -382,7 +382,7 @@ cfg80211_chandef_identical(const struct cfg80211_chan_def *chandef1,
* @chandef1: first channel definition
* @chandef2: second channel definition
*
* Returns %NULL if the given channel definitions are incompatible,
* Return: %NULL if the given channel definitions are incompatible,
* chandef1 or chandef2 otherwise.
*/
const struct cfg80211_chan_def *
......@@ -392,6 +392,7 @@ cfg80211_chandef_compatible(const struct cfg80211_chan_def *chandef1,
/**
* cfg80211_chandef_valid - check if a channel definition is valid
* @chandef: the channel definition to check
* Return: %true if the channel definition is valid. %false otherwise.
*/
bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef);
......@@ -399,7 +400,8 @@ bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef);
* cfg80211_chandef_usable - check if secondary channels can be used
* @wiphy: the wiphy to validate against
* @chandef: the channel definition to check
* @prohibited_flags: the regulatory chanenl flags that must not be set
* @prohibited_flags: the regulatory channel flags that must not be set
* Return: %true if secondary channels are usable. %false otherwise.
*/
bool cfg80211_chandef_usable(struct wiphy *wiphy,
const struct cfg80211_chan_def *chandef,
......@@ -1266,7 +1268,7 @@ struct cfg80211_bss {
*
* Note that the return value is an RCU-protected pointer, so
* rcu_read_lock() must be held when calling this function.
* Returns %NULL if not found.
* Return: %NULL if not found.
*/
const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie);
......@@ -2409,6 +2411,7 @@ static inline void wiphy_net_set(struct wiphy *wiphy, struct net *net)
* wiphy_priv - return priv from wiphy
*
* @wiphy: the wiphy whose priv pointer to return
* Return: The priv of @wiphy.
*/
static inline void *wiphy_priv(struct wiphy *wiphy)
{
......@@ -2420,6 +2423,7 @@ static inline void *wiphy_priv(struct wiphy *wiphy)
* priv_to_wiphy - return the wiphy containing the priv
*
* @priv: a pointer previously returned by wiphy_priv
* Return: The wiphy of @priv.
*/
static inline struct wiphy *priv_to_wiphy(void *priv)
{
......@@ -2442,6 +2446,7 @@ static inline void set_wiphy_dev(struct wiphy *wiphy, struct device *dev)
* wiphy_dev - get wiphy dev pointer
*
* @wiphy: The wiphy whose device struct to look up
* Return: The dev of @wiphy.
*/
static inline struct device *wiphy_dev(struct wiphy *wiphy)
{
......@@ -2452,6 +2457,7 @@ static inline struct device *wiphy_dev(struct wiphy *wiphy)
* wiphy_name - get wiphy name
*
* @wiphy: The wiphy whose name to return
* Return: The name of @wiphy.
*/
static inline const char *wiphy_name(const struct wiphy *wiphy)
{
......@@ -2467,8 +2473,8 @@ static inline const char *wiphy_name(const struct wiphy *wiphy)
* Create a new wiphy and associate the given operations with it.
* @sizeof_priv bytes are allocated for private use.
*
* The returned pointer must be assigned to each netdev's
* ieee80211_ptr for proper operation.
* Return: A pointer to the new wiphy. This pointer must be
* assigned to each netdev's ieee80211_ptr for proper operation.
*/
struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv);
......@@ -2477,7 +2483,7 @@ struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv);
*
* @wiphy: The wiphy to register.
*
* Returns a non-negative wiphy index or a negative error code.
* Return: A non-negative wiphy index or a negative error code.
*/
extern int wiphy_register(struct wiphy *wiphy);
......@@ -2626,6 +2632,7 @@ static inline u8 *wdev_address(struct wireless_dev *wdev)
* wdev_priv - return wiphy priv from wireless_dev
*
* @wdev: The wireless device whose wiphy's priv pointer to return
* Return: The wiphy priv of @wdev.
*/
static inline void *wdev_priv(struct wireless_dev *wdev)
{
......@@ -2643,12 +2650,14 @@ static inline void *wdev_priv(struct wireless_dev *wdev)
* ieee80211_channel_to_frequency - convert channel number to frequency
* @chan: channel number
* @band: band, necessary due to channel number overlap
* Return: The corresponding frequency (in MHz), or 0 if the conversion failed.
*/
extern int ieee80211_channel_to_frequency(int chan, enum ieee80211_band band);
/**
* ieee80211_frequency_to_channel - convert frequency to channel number
* @freq: center frequency
* Return: The corresponding channel, or 0 if the conversion failed.
*/
extern int ieee80211_frequency_to_channel(int freq);
......@@ -2665,6 +2674,7 @@ extern struct ieee80211_channel *__ieee80211_get_channel(struct wiphy *wiphy,
* ieee80211_get_channel - get channel struct from wiphy for specified frequency
* @wiphy: the struct wiphy to get the channel for
* @freq: the center frequency of the channel
* Return: The channel struct from @wiphy at @freq.
*/
static inline struct ieee80211_channel *
ieee80211_get_channel(struct wiphy *wiphy, int freq)
......@@ -2679,10 +2689,10 @@ ieee80211_get_channel(struct wiphy *wiphy, int freq)
* @basic_rates: bitmap of basic rates
* @bitrate: the bitrate for which to find the basic rate
*
* This function returns the basic rate corresponding to a given
* bitrate, that is the next lower bitrate contained in the basic
* rate map, which is, for this function, given as a bitmap of
* indices of rates in the band's bitrate table.
* Return: The basic rate corresponding to a given bitrate, that
* is the next lower bitrate contained in the basic rate map,
* which is, for this function, given as a bitmap of indices of
* rates in the band's bitrate table.
*/
struct ieee80211_rate *
ieee80211_get_response_rate(struct ieee80211_supported_band *sband,
......@@ -2775,18 +2785,21 @@ extern const unsigned char bridge_tunnel_header[6];
/**
* ieee80211_get_hdrlen_from_skb - get header length from data
*
* @skb: the frame
*
* Given an skb with a raw 802.11 header at the data pointer this function
* returns the 802.11 header length in bytes (not including encryption
* headers). If the data in the sk_buff is too short to contain a valid 802.11
* header the function returns 0.
* returns the 802.11 header length.
*
* @skb: the frame
* Return: The 802.11 header length in bytes (not including encryption
* headers). Or 0 if the data in the sk_buff is too short to contain a valid
* 802.11 header.
*/
unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb);
/**
* ieee80211_hdrlen - get header length in bytes from frame control
* @fc: frame control field in little-endian format
* Return: The header length in bytes.
*/
unsigned int __attribute_const__ ieee80211_hdrlen(__le16 fc);
......@@ -2794,7 +2807,7 @@ unsigned int __attribute_const__ ieee80211_hdrlen(__le16 fc);
* ieee80211_get_mesh_hdrlen - get mesh extension header length
* @meshhdr: the mesh extension header, only the flags field
* (first byte) will be accessed
* Returns the length of the extension header, which is always at
* Return: The length of the extension header, which is always at
* least 6 bytes and at most 18 if address 5 and 6 are present.
*/
unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr);
......@@ -2812,6 +2825,7 @@ unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr);
* @skb: the 802.11 data frame
* @addr: the device MAC address
* @iftype: the virtual interface type
* Return: 0 on success. Non-zero on error.
*/
int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr,
enum nl80211_iftype iftype);
......@@ -2823,6 +2837,7 @@ int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr,
* @iftype: the virtual interface type
* @bssid: the network bssid (used only for iftype STATION and ADHOC)
* @qos: build 802.11 QoS data frame
* Return: 0 on success, or a negative error code.
*/
int ieee80211_data_from_8023(struct sk_buff *skb, const u8 *addr,
enum nl80211_iftype iftype, u8 *bssid, bool qos);
......@@ -2850,6 +2865,7 @@ void ieee80211_amsdu_to_8023s(struct sk_buff *skb, struct sk_buff_head *list,
/**
* cfg80211_classify8021d - determine the 802.1p/1d tag for a data frame
* @skb: the data frame
* Return: The 802.1p/1d tag.
*/
unsigned int cfg80211_classify8021d(struct sk_buff *skb);
......@@ -2860,12 +2876,13 @@ unsigned int cfg80211_classify8021d(struct sk_buff *skb);
* @ies: data consisting of IEs
* @len: length of data
*
* This function will return %NULL if the element ID could
* not be found or if the element is invalid (claims to be
* longer than the given data), or a pointer to the first byte
* of the requested element, that is the byte containing the
* element ID. There are no checks on the element length
* other than having to fit into the given data.
* Return: %NULL if the element ID could not be found or if
* the element is invalid (claims to be longer than the given
* data), or a pointer to the first byte of the requested
* element, that is the byte containing the element ID.
*
* Note: There are no checks on the element length other than
* having to fit into the given data.
*/
const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len);
......@@ -2877,12 +2894,13 @@ const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len);
* @ies: data consisting of IEs
* @len: length of data
*
* This function will return %NULL if the vendor specific element ID
* could not be found or if the element is invalid (claims to be
* longer than the given data), or a pointer to the first byte
* of the requested element, that is the byte containing the
* element ID. There are no checks on the element length
* other than having to fit into the given data.
* Return: %NULL if the vendor specific element ID could not be found or if the
* element is invalid (claims to be longer than the given data), or a pointer to
* the first byte of the requested element, that is the byte containing the
* element ID.
*
* Note: There are no checks on the element length other than having to fit into
* the given data.
*/
const u8 *cfg80211_find_vendor_ie(unsigned int oui, u8 oui_type,
const u8 *ies, int len);
......@@ -2915,6 +2933,8 @@ const u8 *cfg80211_find_vendor_ie(unsigned int oui, u8 oui_type,
*
* Drivers should check the return value, its possible you can get
* an -ENOMEM.
*
* Return: 0 on success. -ENOMEM.
*/
extern int regulatory_hint(struct wiphy *wiphy, const char *alpha2);
......@@ -2944,13 +2964,13 @@ extern void wiphy_apply_custom_regulatory(
* it wants to follow we respect that unless a country IE has been received
* and processed already.
*
* When an error occurs, for example if no rule can be found, the return value
* is encoded using ERR_PTR(). Use IS_ERR() to check and PTR_ERR() to obtain
* the numeric return value. The numeric return value will be -ERANGE if we
* determine the given center_freq does not even have a regulatory rule for a
* frequency range in the center_freq's band. See freq_in_rule_band() for our
* current definition of a band -- this is purely subjective and right now it's
* 802.11 specific.
* Return: A valid pointer, or, when an error occurs, for example if no rule
* can be found, the return value is encoded using ERR_PTR(). Use IS_ERR() to
* check and PTR_ERR() to obtain the numeric return value. The numeric return
* value will be -ERANGE if we determine the given center_freq does not even
* have a regulatory rule for a frequency range in the center_freq's band.
* See freq_in_rule_band() for our current definition of a band -- this is
* purely subjective and right now it's 802.11 specific.
*/
const struct ieee80211_reg_rule *freq_reg_info(struct wiphy *wiphy,
u32 center_freq);
......@@ -3000,7 +3020,8 @@ void cfg80211_sched_scan_stopped(struct wiphy *wiphy);
* This informs cfg80211 that BSS information was found and
* the BSS should be updated/added.
*
* NOTE: Returns a referenced struct, must be released with cfg80211_put_bss()!
* Return: A referenced struct, must be released with cfg80211_put_bss()!
* Or %NULL on error.
*/
struct cfg80211_bss * __must_check
cfg80211_inform_bss_frame(struct wiphy *wiphy,
......@@ -3025,7 +3046,8 @@ cfg80211_inform_bss_frame(struct wiphy *wiphy,
* This informs cfg80211 that BSS information was found and
* the BSS should be updated/added.
*
* NOTE: Returns a referenced struct, must be released with cfg80211_put_bss()!
* Return: A referenced struct, must be released with cfg80211_put_bss()!
* Or %NULL on error.
*/
struct cfg80211_bss * __must_check
cfg80211_inform_bss(struct wiphy *wiphy,
......@@ -3302,16 +3324,18 @@ void wiphy_rfkill_stop_polling(struct wiphy *wiphy);
* the testmode command. Since it is intended for a reply, calling
* it outside of the @testmode_cmd operation is invalid.
*
* The returned skb (or %NULL if any errors happen) is pre-filled
* with the wiphy index and set up in a way that any data that is
* put into the skb (with skb_put(), nla_put() or similar) will end
* up being within the %NL80211_ATTR_TESTDATA attribute, so all that
* needs to be done with the skb is adding data for the corresponding
* userspace tool which can then read that data out of the testdata
* attribute. You must not modify the skb in any other way.
* The returned skb is pre-filled with the wiphy index and set up in
* a way that any data that is put into the skb (with skb_put(),
* nla_put() or similar) will end up being within the
* %NL80211_ATTR_TESTDATA attribute, so all that needs to be done
* with the skb is adding data for the corresponding userspace tool
* which can then read that data out of the testdata attribute. You
* must not modify the skb in any other way.
*
* When done, call cfg80211_testmode_reply() with the skb and return
* its error code as the result of the @testmode_cmd operation.
*
* Return: An allocated and pre-filled skb. %NULL if any errors happen.
*/
struct sk_buff *cfg80211_testmode_alloc_reply_skb(struct wiphy *wiphy,
int approxlen);
......@@ -3321,11 +3345,12 @@ struct sk_buff *cfg80211_testmode_alloc_reply_skb(struct wiphy *wiphy,
* @skb: The skb, must have been allocated with
* cfg80211_testmode_alloc_reply_skb()
*
* Returns an error code or 0 on success, since calling this
* function will usually be the last thing before returning
* from the @testmode_cmd you should return the error code.
* Note that this function consumes the skb regardless of the
* return value.
* Since calling this function will usually be the last thing
* before returning from the @testmode_cmd you should return
* the error code. Note that this function consumes the skb
* regardless of the return value.
*
* Return: An error code or 0 on success.
*/
int cfg80211_testmode_reply(struct sk_buff *skb);
......@@ -3339,14 +3364,16 @@ int cfg80211_testmode_reply(struct sk_buff *skb);
* This function allocates and pre-fills an skb for an event on the
* testmode multicast group.
*
* The returned skb (or %NULL if any errors happen) is set up in the
* same way as with cfg80211_testmode_alloc_reply_skb() but prepared
* for an event. As there, you should simply add data to it that will
* then end up in the %NL80211_ATTR_TESTDATA attribute. Again, you must
* not modify the skb in any other way.
* The returned skb is set up in the same way as with
* cfg80211_testmode_alloc_reply_skb() but prepared for an event. As
* there, you should simply add data to it that will then end up in the
* %NL80211_ATTR_TESTDATA attribute. Again, you must not modify the skb
* in any other way.
*
* When done filling the skb, call cfg80211_testmode_event() with the
* skb to send the event.
*
* Return: An allocated and pre-filled skb. %NULL if any errors happen.
*/
struct sk_buff *cfg80211_testmode_alloc_event_skb(struct wiphy *wiphy,
int approxlen, gfp_t gfp);
......@@ -3527,13 +3554,13 @@ void cfg80211_conn_failed(struct net_device *dev, const u8 *mac_addr,
* @len: length of the frame data
* @gfp: context flags
*
* Returns %true if a user space application has registered for this frame.
* This function is called whenever an Action frame is received for a station
* mode interface, but is not processed in kernel.
*
* Return: %true if a user space application has registered for this frame.
* For action frames, that makes it responsible for rejecting unrecognized
* action frames; %false otherwise, in which case for action frames the
* driver is responsible for rejecting the frame.
*
* This function is called whenever an Action frame is received for a station
* mode interface, but is not processed in kernel.
*/
bool cfg80211_rx_mgmt(struct wireless_dev *wdev, int freq, int sig_dbm,
const u8 *buf, size_t len, gfp_t gfp);
......@@ -3625,7 +3652,7 @@ void cfg80211_pmksa_candidate_notify(struct net_device *dev, int index,
* This function is used in AP mode (only!) to inform userspace that
* a spurious class 3 frame was received, to be able to deauth the
* sender.
* Returns %true if the frame was passed to userspace (or this failed
* Return: %true if the frame was passed to userspace (or this failed
* for a reason other than not having a subscription.)
*/
bool cfg80211_rx_spurious_frame(struct net_device *dev,
......@@ -3641,7 +3668,7 @@ bool cfg80211_rx_spurious_frame(struct net_device *dev,
* an associated station sent a 4addr frame but that wasn't expected.
* It is allowed and desirable to send this event only once for each
* station to avoid event flooding.
* Returns %true if the frame was passed to userspace (or this failed
* Return: %true if the frame was passed to userspace (or this failed
* for a reason other than not having a subscription.)
*/
bool cfg80211_rx_unexpected_4addr_frame(struct net_device *dev,
......@@ -3679,8 +3706,8 @@ void cfg80211_report_obss_beacon(struct wiphy *wiphy,
* @wiphy: the wiphy
* @chandef: the channel definition
*
* This function returns true if there is no secondary channel or the secondary
* channel(s) can be used for beaconing (i.e. is not a radar channel etc.)
* Return: %true if there is no secondary channel or the secondary channel(s)
* can be used for beaconing (i.e. is not a radar channel etc.)
*/
bool cfg80211_reg_can_beacon(struct wiphy *wiphy,
struct cfg80211_chan_def *chandef);
......@@ -3750,9 +3777,9 @@ void cfg80211_unregister_wdev(struct wireless_dev *wdev);
* The function finds a given P2P attribute in the (vendor) IEs and
* copies its contents to the given buffer.
*
* The return value is a negative error code (-%EILSEQ or -%ENOENT) if
* the data is malformed or the attribute can't be found (respectively),
* or the length of the found attribute (which can be zero).
* Return: A negative error code (-%EILSEQ or -%ENOENT) if the data is
* malformed or the attribute can't be found (respectively), or the
* length of the found attribute (which can be zero).
*/
int cfg80211_get_p2p_attr(const u8 *ies, unsigned int len,
enum ieee80211_p2p_attr_id attr,
......
......@@ -1522,6 +1522,8 @@ struct ieee80211_hw {
* structure can then access it via hw->priv. Note that mac802111 drivers should
* not use wiphy_priv() to try to get their private driver structure as this
* is already used internally by mac80211.
*
* Return: The mac80211 driver hw struct of @wiphy.
*/
struct ieee80211_hw *wiphy_to_ieee80211_hw(struct wiphy *wiphy);
......@@ -2673,6 +2675,8 @@ struct ieee80211_ops {
*
* @priv_data_len: length of private data
* @ops: callbacks for this device
*
* Return: A pointer to the new hardware device, or %NULL on error.
*/
struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
const struct ieee80211_ops *ops);
......@@ -2685,6 +2689,8 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
* need to fill the contained wiphy's information.
*
* @hw: the device to register as returned by ieee80211_alloc_hw()
*
* Return: 0 on success. An error code otherwise.
*/
int ieee80211_register_hw(struct ieee80211_hw *hw);
......@@ -2731,6 +2737,8 @@ extern char *__ieee80211_create_tpt_led_trigger(
* of the trigger so you can automatically link the LED device.
*
* @hw: the hardware to get the LED trigger name for
*
* Return: The name of the LED trigger. %NULL if not configured for LEDs.
*/
static inline char *ieee80211_get_tx_led_name(struct ieee80211_hw *hw)
{
......@@ -2750,6 +2758,8 @@ static inline char *ieee80211_get_tx_led_name(struct ieee80211_hw *hw)
* of the trigger so you can automatically link the LED device.
*
* @hw: the hardware to get the LED trigger name for
*
* Return: The name of the LED trigger. %NULL if not configured for LEDs.
*/
static inline char *ieee80211_get_rx_led_name(struct ieee80211_hw *hw)
{
......@@ -2769,6 +2779,8 @@ static inline char *ieee80211_get_rx_led_name(struct ieee80211_hw *hw)
* of the trigger so you can automatically link the LED device.
*
* @hw: the hardware to get the LED trigger name for
*
* Return: The name of the LED trigger. %NULL if not configured for LEDs.
*/
static inline char *ieee80211_get_assoc_led_name(struct ieee80211_hw *hw)
{
......@@ -2788,6 +2800,8 @@ static inline char *ieee80211_get_assoc_led_name(struct ieee80211_hw *hw)
* of the trigger so you can automatically link the LED device.
*
* @hw: the hardware to get the LED trigger name for
*
* Return: The name of the LED trigger. %NULL if not configured for LEDs.
*/
static inline char *ieee80211_get_radio_led_name(struct ieee80211_hw *hw)
{
......@@ -2805,9 +2819,10 @@ static inline char *ieee80211_get_radio_led_name(struct ieee80211_hw *hw)
* @blink_table: the blink table -- needs to be ordered by throughput
* @blink_table_len: size of the blink table
*
* This function returns %NULL (in case of error, or if no LED
* triggers are configured) or the name of the new trigger.
* This function must be called before ieee80211_register_hw().
* Return: %NULL (in case of error, or if no LED triggers are
* configured) or the name of the new trigger.
*
* Note: This function must be called before ieee80211_register_hw().
*/
static inline char *
ieee80211_create_tpt_led_trigger(struct ieee80211_hw *hw, unsigned int flags,
......@@ -2940,10 +2955,10 @@ static inline void ieee80211_rx_ni(struct ieee80211_hw *hw,
* Calls to this function for a single hardware must be synchronized against
* each other.
*
* The function returns -EINVAL when the requested PS mode is already set.
*
* @sta: currently connected sta
* @start: start or stop PS
*
* Return: 0 on success. -EINVAL when the requested PS mode is already set.
*/
int ieee80211_sta_ps_transition(struct ieee80211_sta *sta, bool start);
......@@ -2957,6 +2972,8 @@ int ieee80211_sta_ps_transition(struct ieee80211_sta *sta, bool start);
*
* @sta: currently connected sta
* @start: start or stop PS
*
* Return: Like ieee80211_sta_ps_transition().
*/
static inline int ieee80211_sta_ps_transition_ni(struct ieee80211_sta *sta,
bool start)
......@@ -3094,6 +3111,8 @@ void ieee80211_report_low_ack(struct ieee80211_sta *sta, u32 num_packets);
* according to the current DTIM parameters/TIM bitmap.
*
* The driver is responsible for freeing the returned skb.
*
* Return: The beacon template. %NULL on error.
*/
struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
......@@ -3105,6 +3124,8 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw,
* @vif: &struct ieee80211_vif pointer from the add_interface callback.
*
* See ieee80211_beacon_get_tim().
*
* Return: See ieee80211_beacon_get_tim().
*/
static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
struct ieee80211_vif *vif)
......@@ -3121,6 +3142,8 @@ static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
* hardware. The destination address should be set by the caller.
*
* Can only be called in AP mode.
*
* Return: The Probe Response template. %NULL on error.
*/
struct sk_buff *ieee80211_proberesp_get(struct ieee80211_hw *hw,
struct ieee80211_vif *vif);
......@@ -3136,6 +3159,8 @@ struct sk_buff *ieee80211_proberesp_get(struct ieee80211_hw *hw,
*
* Note: Caller (or hardware) is responsible for setting the
* &IEEE80211_FCTL_PM bit.
*
* Return: The PS Poll template. %NULL on error.
*/
struct sk_buff *ieee80211_pspoll_get(struct ieee80211_hw *hw,
struct ieee80211_vif *vif);
......@@ -3151,6 +3176,8 @@ struct sk_buff *ieee80211_pspoll_get(struct ieee80211_hw *hw,
*
* Note: Caller (or hardware) is responsible for setting the
* &IEEE80211_FCTL_PM bit as well as Duration and Sequence Control fields.
*
* Return: The nullfunc template. %NULL on error.
*/
struct sk_buff *ieee80211_nullfunc_get(struct ieee80211_hw *hw,
struct ieee80211_vif *vif);
......@@ -3165,6 +3192,8 @@ struct sk_buff *ieee80211_nullfunc_get(struct ieee80211_hw *hw,
*
* Creates a Probe Request template which can, for example, be uploaded to
* hardware.
*
* Return: The Probe Request template. %NULL on error.
*/
struct sk_buff *ieee80211_probereq_get(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
......@@ -3200,6 +3229,8 @@ void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
* If the RTS is generated in firmware, but the host system must provide
* the duration field, the low-level driver uses this function to receive
* the duration field value in little-endian byteorder.
*
* Return: The duration.
*/
__le16 ieee80211_rts_duration(struct ieee80211_hw *hw,
struct ieee80211_vif *vif, size_t frame_len,
......@@ -3235,6 +3266,8 @@ void ieee80211_ctstoself_get(struct ieee80211_hw *hw,
* If the CTS-to-self is generated in firmware, but the host system must provide
* the duration field, the low-level driver uses this function to receive
* the duration field value in little-endian byteorder.
*
* Return: The duration.
*/
__le16 ieee80211_ctstoself_duration(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
......@@ -3251,6 +3284,8 @@ __le16 ieee80211_ctstoself_duration(struct ieee80211_hw *hw,
*
* Calculate the duration field of some generic frame, given its
* length and transmission rate (in 100kbps).
*
* Return: The duration.
*/
__le16 ieee80211_generic_frame_duration(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
......@@ -3267,9 +3302,10 @@ __le16 ieee80211_generic_frame_duration(struct ieee80211_hw *hw,
* hardware/firmware does not implement buffering of broadcast/multicast
* frames when power saving is used, 802.11 code buffers them in the host
* memory. The low-level driver uses this function to fetch next buffered
* frame. In most cases, this is used when generating beacon frame. This
* function returns a pointer to the next buffered skb or NULL if no more
* buffered frames are available.
* frame. In most cases, this is used when generating beacon frame.
*
* Return: A pointer to the next buffered skb or NULL if no more buffered
* frames are available.
*
* Note: buffered frames are returned only after DTIM beacon frame was
* generated with ieee80211_beacon_get() and the low-level driver must thus
......@@ -3449,6 +3485,8 @@ void ieee80211_stop_queue(struct ieee80211_hw *hw, int queue);
* @queue: queue number (counted from zero).
*
* Drivers should use this function instead of netif_stop_queue.
*
* Return: %true if the queue is stopped. %false otherwise.
*/
int ieee80211_queue_stopped(struct ieee80211_hw *hw, int queue);
......@@ -3646,7 +3684,9 @@ void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, const u8 *ra,
* @vif: virtual interface to look for station on
* @addr: station's address
*
* This function must be called under RCU lock and the
* Return: The station, if found. %NULL otherwise.
*
* Note: This function must be called under RCU lock and the
* resulting pointer is only valid under RCU lock as well.
*/
struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_vif *vif,
......@@ -3659,7 +3699,9 @@ struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_vif *vif,
* @addr: remote station's address
* @localaddr: local address (vif->sdata->vif.addr). Use NULL for 'any'.
*
* This function must be called under RCU lock and the
* Return: The station, if found. %NULL otherwise.
*
* Note: This function must be called under RCU lock and the
* resulting pointer is only valid under RCU lock as well.
*
* NOTE: You may pass NULL for localaddr, but then you will just get
......@@ -3789,7 +3831,9 @@ void ieee80211_iter_chan_contexts_atomic(
* information. This function must only be called from within the
* .bss_info_changed callback function and only in managed mode. The function
* is only useful when the interface is associated, otherwise it will return
* NULL.
* %NULL.
*
* Return: The Probe Request template. %NULL on error.
*/
struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw,
struct ieee80211_vif *vif);
......@@ -4136,12 +4180,14 @@ void ieee80211_enable_rssi_reports(struct ieee80211_vif *vif,
void ieee80211_disable_rssi_reports(struct ieee80211_vif *vif);
/**
* ieee80211_ave_rssi - report the average rssi for the specified interface
* ieee80211_ave_rssi - report the average RSSI for the specified interface
*
* @vif: the specified virtual interface
*
* This function return the average rssi value for the requested interface.
* It assumes that the given vif is valid.
* Note: This function assumes that the given vif is valid.
*
* Return: The average RSSI value for the requested interface, or 0 if not
* applicable.
*/
int ieee80211_ave_rssi(struct ieee80211_vif *vif);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册