From 0ada2da51800a4914887a9bcf22d563be80e50be Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 18 Jan 2012 17:32:05 -0800 Subject: [PATCH] ARM: mach-shmobile: mackerel: use renesas_usbhs instead of r8a66597_hcd Current renesas_usbhs driver can use both USB host/gadget. This patch removes current r8a66597_hcd driver settings, and adds renesas_usbhs host driver settings for mackerel USB1 port. You can still use this port as "gadget" with small modify. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-mackerel.c | 73 +++---------------------- 1 file changed, 9 insertions(+), 64 deletions(-) diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 9b42fbd10f8e..f0cc307df640 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -43,7 +43,6 @@ #include #include #include -#include #include #include @@ -145,11 +144,6 @@ * 1-2 short | VBUS 5V | Host * open | external VBUS | Function * - * *1 - * CN31 is used as - * CONFIG_USB_R8A66597_HCD Host - * CONFIG_USB_RENESAS_USBHS Function - * * CAUTION * * renesas_usbhs driver can use external interrupt mode @@ -161,15 +155,6 @@ * mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0", * because Touchscreen is using IRQ7-PORT40. * It is impossible to use IRQ7 demux on this board. - * - * We can use external interrupt mode USB-Function on "USB1". - * USB1 can become Host by r8a66597, and become Function by renesas_usbhs. - * But don't select both drivers in same time. - * These uses same IRQ number for request_irq(), and aren't supporting - * IRQF_SHARED / IORESOURCE_IRQ_SHAREABLE. - * - * Actually these are old/new version of USB driver. - * This mean its register will be broken if it supports shared IRQ, */ /* @@ -676,51 +661,16 @@ static struct platform_device usbhs0_device = { * Use J30 to select between Host and Function. This setting * can however not be detected by software. Hotplug of USBHS1 * is provided via IRQ8. + * + * Current USB1 works as "USB Host". + * - set J30 "short" + * + * If you want to use it as "USB gadget", + * - J30 "open" + * - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET + * - add .get_vbus = usbhs_get_vbus in usbhs1_private */ #define IRQ8 evt2irq(0x0300) - -/* USBHS1 USB Host support via r8a66597_hcd */ -static void usb1_host_port_power(int port, int power) -{ - if (!power) /* only power-on is supported for now */ - return; - - /* set VBOUT/PWEN and EXTLP1 in DVSTCTR */ - __raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008); -} - -static struct r8a66597_platdata usb1_host_data = { - .on_chip = 1, - .port_power = usb1_host_port_power, -}; - -static struct resource usb1_host_resources[] = { - [0] = { - .name = "USBHS1", - .start = 0xe68b0000, - .end = 0xe68b00e6 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x1ce0) /* USB1_USB1I0 */, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device usb1_host_device = { - .name = "r8a66597_hcd", - .id = 1, - .dev = { - .dma_mask = NULL, /* not use dma */ - .coherent_dma_mask = 0xffffffff, - .platform_data = &usb1_host_data, - }, - .num_resources = ARRAY_SIZE(usb1_host_resources), - .resource = usb1_host_resources, -}; - -/* USBHS1 USB Function support via renesas_usbhs */ - #define USB_PHY_MODE (1 << 4) #define USB_PHY_INT_EN ((1 << 3) | (1 << 2)) #define USB_PHY_ON (1 << 1) @@ -776,7 +726,7 @@ static void usbhs1_hardware_exit(struct platform_device *pdev) static int usbhs1_get_id(struct platform_device *pdev) { - return USBHS_GADGET; + return USBHS_HOST; } static u32 usbhs1_pipe_cfg[] = { @@ -807,7 +757,6 @@ static struct usbhs_private usbhs1_private = { .hardware_exit = usbhs1_hardware_exit, .get_id = usbhs1_get_id, .phy_reset = usbhs_phy_reset, - .get_vbus = usbhs_get_vbus, }, .driver_param = { .buswait_bwait = 4, @@ -1311,7 +1260,6 @@ static struct platform_device *mackerel_devices[] __initdata = { &nor_flash_device, &smc911x_device, &lcdc_device, - &usb1_host_device, &usbhs1_device, &usbhs0_device, &leds_device, @@ -1473,9 +1421,6 @@ static void __init mackerel_init(void) gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */ gpio_request(GPIO_FN_IDIN_1_113, NULL); - /* USB phy tweak to make the r8a66597_hcd host driver work */ - __raw_writew(0x8a0a, 0xe6058130); /* USBCR4 */ - /* enable FSI2 port A (ak4643) */ gpio_request(GPIO_FN_FSIAIBT, NULL); gpio_request(GPIO_FN_FSIAILR, NULL); -- GitLab