diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index a5c141cecd4edf0aca3a89900d6c5927d03cd92f..ad26f1fdf273e14129e2ec0bff60d0210919a7c6 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1386,7 +1386,8 @@ config FORCEDETH_NAPI config CS89x0 tristate "CS89x0 support" - depends on NET_PCI && (ISA || MACH_IXDP2351 || ARCH_IXDP2X01 || ARCH_PNX010X) + depends on NET_ETHERNET && (ISA || EISA || MACH_IXDP2351 \ + || ARCH_IXDP2X01 || ARCH_PNX010X || MACH_MX31ADS) ---help--- Support for CS89x0 chipset based Ethernet cards. If you have a network (Ethernet) card of this type, say Y and read the @@ -1397,6 +1398,11 @@ config CS89x0 To compile this driver as a module, choose M here. The module will be called cs89x0. +config CS89x0_NONISA_IRQ + def_bool y + depends on CS89x0 != n + depends on MACH_IXDP2351 || ARCH_IXDP2X01 || ARCH_PNX010X || MACH_MX31ADS + config TC35815 tristate "TOSHIBA TC35815 Ethernet support" depends on NET_PCI && PCI && MIPS diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c index ea6144a9565e571665db792b7686a31ff991c823..5890a917a628b2155ff88e6ad44ed130a166b5fc 100644 --- a/drivers/net/cs89x0.c +++ b/drivers/net/cs89x0.c @@ -194,6 +194,12 @@ static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0}; #define CIRRUS_DEFAULT_IRQ VH_INTC_INT_NUM_CASCADED_INTERRUPT_1 /* Event inputs bank 1 - ID 35/bit 3 */ static unsigned int netcard_portlist[] __used __initdata = {CIRRUS_DEFAULT_BASE, 0}; static unsigned int cs8900_irq_map[] = {CIRRUS_DEFAULT_IRQ, 0, 0, 0}; +#elif defined(CONFIG_MACH_MX31ADS) +#include +static unsigned int netcard_portlist[] __used __initdata = { + PBC_BASE_ADDRESS + PBC_CS8900A_IOBASE + 0x300, 0 +}; +static unsigned cs8900_irq_map[] = {EXPIO_INT_ENET_INT, 0, 0, 0}; #else static unsigned int netcard_portlist[] __used __initdata = { 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0}; @@ -802,7 +808,7 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular) } else { i = lp->isa_config & INT_NO_MASK; if (lp->chip_type == CS8900) { -#if defined(CONFIG_MACH_IXDP2351) || defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_ARCH_PNX010X) +#ifdef CONFIG_CS89x0_NONISA_IRQ i = cs8900_irq_map[0]; #else /* Translate the IRQ using the IRQ mapping table. */ @@ -1029,6 +1035,7 @@ dma_rx(struct net_device *dev) void __init reset_chip(struct net_device *dev) { +#if !defined(CONFIG_MACH_MX31ADS) #if !defined(CONFIG_MACH_IXDP2351) && !defined(CONFIG_ARCH_IXDP2X01) struct net_local *lp = netdev_priv(dev); int ioaddr = dev->base_addr; @@ -1057,6 +1064,7 @@ void __init reset_chip(struct net_device *dev) reset_start_time = jiffies; while( (readreg(dev, PP_SelfST) & INIT_DONE) == 0 && jiffies - reset_start_time < 2) ; +#endif /* !CONFIG_MACH_MX31ADS */ } @@ -1304,7 +1312,7 @@ net_open(struct net_device *dev) else #endif { -#if !defined(CONFIG_MACH_IXDP2351) && !defined(CONFIG_ARCH_IXDP2X01) && !defined(CONFIG_ARCH_PNX010X) +#ifndef CONFIG_CS89x0_NONISA_IRQ if (((1 << dev->irq) & lp->irq_map) == 0) { printk(KERN_ERR "%s: IRQ %d is not in our map of allowable IRQs, which is %x\n", dev->name, dev->irq, lp->irq_map);