diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 5327decde5a04e58a2d6a7a0be6589d279fbeb49..9edaf4734fa84956d27539b2411e581aa1ef76a5 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -81,6 +81,44 @@ void __init ixp4xx_map_io(void) iotable_init(ixp4xx_io_desc, ARRAY_SIZE(ixp4xx_io_desc)); } +/* + * GPIO-functions + */ +/* + * The following converted to the real HW bits the gpio_line_config + */ +/* GPIO pin types */ +#define IXP4XX_GPIO_OUT 0x1 +#define IXP4XX_GPIO_IN 0x2 + +/* GPIO signal types */ +#define IXP4XX_GPIO_LOW 0 +#define IXP4XX_GPIO_HIGH 1 + +/* GPIO Clocks */ +#define IXP4XX_GPIO_CLK_0 14 +#define IXP4XX_GPIO_CLK_1 15 + +static void gpio_line_config(u8 line, u32 direction) +{ + if (direction == IXP4XX_GPIO_IN) + *IXP4XX_GPIO_GPOER |= (1 << line); + else + *IXP4XX_GPIO_GPOER &= ~(1 << line); +} + +static void gpio_line_get(u8 line, int *value) +{ + *value = (*IXP4XX_GPIO_GPINR >> line) & 0x1; +} + +static void gpio_line_set(u8 line, int value) +{ + if (value == IXP4XX_GPIO_HIGH) + *IXP4XX_GPIO_GPOUTR |= (1 << line); + else if (value == IXP4XX_GPIO_LOW) + *IXP4XX_GPIO_GPOUTR &= ~(1 << line); +} /************************************************************************* * IXP4xx chipset IRQ handling @@ -117,17 +155,6 @@ static int ixp4xx_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) return -EINVAL; } -int irq_to_gpio(unsigned int irq) -{ - int gpio = (irq < 32) ? irq2gpio[irq] : -EINVAL; - - if (gpio == -1) - return -EINVAL; - - return gpio; -} -EXPORT_SYMBOL(irq_to_gpio); - static int ixp4xx_set_irq_type(struct irq_data *d, unsigned int type) { int line = irq2gpio[d->irq]; diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c index 63de1b3fd06bf0327549cf7670761ac7bccf7298..736dc692d54047b7f56e0b409fda416662252ad1 100644 --- a/arch/arm/mach-ixp4xx/dsmg600-setup.c +++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c @@ -26,6 +26,7 @@ #include #include #include +#include #include @@ -161,11 +162,8 @@ static struct platform_device *dsmg600_devices[] __initdata = { static void dsmg600_power_off(void) { - /* enable the pwr cntl gpio */ - gpio_line_config(DSMG600_PO_GPIO, IXP4XX_GPIO_OUT); - - /* poweroff */ - gpio_line_set(DSMG600_PO_GPIO, IXP4XX_GPIO_HIGH); + /* enable the pwr cntl and drive it high */ + gpio_direction_output(DSMG600_PO_GPIO, 1); } /* This is used to make sure the power-button pusher is serious. The button @@ -202,7 +200,7 @@ static void dsmg600_power_handler(unsigned long data) ctrl_alt_del(); /* Change the state of the power LED to "blink" */ - gpio_line_set(DSMG600_LED_PWR_GPIO, IXP4XX_GPIO_LOW); + gpio_set_value(DSMG600_LED_PWR_GPIO, 0); } else { power_button_countdown = PBUTTON_HOLDDOWN_COUNT; } @@ -228,6 +226,40 @@ static void __init dsmg600_timer_init(void) ixp4xx_timer_init(); } +static int __init dsmg600_gpio_init(void) +{ + if (!machine_is_dsmg600()) + return 0; + + gpio_request(DSMG600_RB_GPIO, "reset button"); + if (request_irq(gpio_to_irq(DSMG600_RB_GPIO), &dsmg600_reset_handler, + IRQF_DISABLED | IRQF_TRIGGER_LOW, + "DSM-G600 reset button", NULL) < 0) { + + printk(KERN_DEBUG "Reset Button IRQ %d not available\n", + gpio_to_irq(DSMG600_RB_GPIO)); + } + + /* + * The power button on the D-Link DSM-G600 is on GPIO 15, but + * it cannot handle interrupts on that GPIO line. So we'll + * have to poll it with a kernel timer. + */ + + /* Make sure that the power button GPIO is set up as an input */ + gpio_request(DSMG600_PB_GPIO, "power button"); + gpio_direction_input(DSMG600_PB_GPIO); + /* Request poweroff GPIO line */ + gpio_request(DSMG600_PO_GPIO, "power off button"); + + /* Set the initial value for the power button IRQ handler */ + power_button_countdown = PBUTTON_HOLDDOWN_COUNT; + + mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500)); + return 0; +} +device_initcall(dsmg600_gpio_init); + static void __init dsmg600_init(void) { ixp4xx_sys_init(); @@ -251,27 +283,6 @@ static void __init dsmg600_init(void) platform_add_devices(dsmg600_devices, ARRAY_SIZE(dsmg600_devices)); pm_power_off = dsmg600_power_off; - - if (request_irq(gpio_to_irq(DSMG600_RB_GPIO), &dsmg600_reset_handler, - IRQF_DISABLED | IRQF_TRIGGER_LOW, - "DSM-G600 reset button", NULL) < 0) { - - printk(KERN_DEBUG "Reset Button IRQ %d not available\n", - gpio_to_irq(DSMG600_RB_GPIO)); - } - - /* The power button on the D-Link DSM-G600 is on GPIO 15, but - * it cannot handle interrupts on that GPIO line. So we'll - * have to poll it with a kernel timer. - */ - - /* Make sure that the power button GPIO is set up as an input */ - gpio_line_config(DSMG600_PB_GPIO, IXP4XX_GPIO_IN); - - /* Set the initial value for the power button IRQ handler */ - power_button_countdown = PBUTTON_HOLDDOWN_COUNT; - - mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500)); } MACHINE_START(DSMG600, "D-Link DSM-G600 RevA") diff --git a/arch/arm/mach-ixp4xx/include/mach/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h index 4c4c6a6f45266a979d0e624be2187853f8cfc4c4..75c4c6572ad04e5d1907f5b40bb6a34413b7d781 100644 --- a/arch/arm/mach-ixp4xx/include/mach/platform.h +++ b/arch/arm/mach-ixp4xx/include/mach/platform.h @@ -131,44 +131,5 @@ struct pci_sys_data; extern int ixp4xx_setup(int nr, struct pci_sys_data *sys); extern struct pci_ops ixp4xx_ops; -/* - * GPIO-functions - */ -/* - * The following converted to the real HW bits the gpio_line_config - */ -/* GPIO pin types */ -#define IXP4XX_GPIO_OUT 0x1 -#define IXP4XX_GPIO_IN 0x2 - -/* GPIO signal types */ -#define IXP4XX_GPIO_LOW 0 -#define IXP4XX_GPIO_HIGH 1 - -/* GPIO Clocks */ -#define IXP4XX_GPIO_CLK_0 14 -#define IXP4XX_GPIO_CLK_1 15 - -static inline void gpio_line_config(u8 line, u32 direction) -{ - if (direction == IXP4XX_GPIO_IN) - *IXP4XX_GPIO_GPOER |= (1 << line); - else - *IXP4XX_GPIO_GPOER &= ~(1 << line); -} - -static inline void gpio_line_get(u8 line, int *value) -{ - *value = (*IXP4XX_GPIO_GPINR >> line) & 0x1; -} - -static inline void gpio_line_set(u8 line, int value) -{ - if (value == IXP4XX_GPIO_HIGH) - *IXP4XX_GPIO_GPOUTR |= (1 << line); - else if (value == IXP4XX_GPIO_LOW) - *IXP4XX_GPIO_GPOUTR &= ~(1 << line); -} - #endif // __ASSEMBLY__ diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index 22d688b7d51302a711ac75f67e5fc909a9abcd1f..e7b8befa872950c43d7289e12f49ae7850d6c3c9 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -80,10 +81,10 @@ ixdp425_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) if (ctrl & NAND_CTRL_CHANGE) { if (ctrl & NAND_NCE) { - gpio_line_set(IXDP425_NAND_NCE_PIN, IXP4XX_GPIO_LOW); + gpio_set_value(IXDP425_NAND_NCE_PIN, 0); udelay(5); } else - gpio_line_set(IXDP425_NAND_NCE_PIN, IXP4XX_GPIO_HIGH); + gpio_set_value(IXDP425_NAND_NCE_PIN, 1); offset = (ctrl & NAND_CLE) ? IXDP425_NAND_CMD_BYTE : 0; offset |= (ctrl & NAND_ALE) ? IXDP425_NAND_ADDR_BYTE : 0; @@ -227,7 +228,8 @@ static void __init ixdp425_init(void) ixdp425_flash_nand_resource.start = IXP4XX_EXP_BUS_BASE(3), ixdp425_flash_nand_resource.end = IXP4XX_EXP_BUS_BASE(3) + 0x10 - 1; - gpio_line_config(IXDP425_NAND_NCE_PIN, IXP4XX_GPIO_OUT); + gpio_request(IXDP425_NAND_NCE_PIN, "NAND NCE pin"); + gpio_direction_output(IXDP425_NAND_NCE_PIN, 0); /* Configure expansion bus for NAND Flash */ *IXP4XX_EXP_CS3 = IXP4XX_EXP_BUS_CS_EN | diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c index ed667ce9f576a8548978b0faa7b5e5d5776687e4..507cb52335373eb3d8857cb2c2380b4e642b7baf 100644 --- a/arch/arm/mach-ixp4xx/nas100d-setup.c +++ b/arch/arm/mach-ixp4xx/nas100d-setup.c @@ -184,11 +184,8 @@ static void nas100d_power_off(void) { /* This causes the box to drop the power and go dead. */ - /* enable the pwr cntl gpio */ - gpio_line_config(NAS100D_PO_GPIO, IXP4XX_GPIO_OUT); - - /* do the deed */ - gpio_line_set(NAS100D_PO_GPIO, IXP4XX_GPIO_HIGH); + /* enable the pwr cntl gpio and assert power off */ + gpio_direction_output(NAS100D_PO_GPIO, 1); } /* This is used to make sure the power-button pusher is serious. The button @@ -225,7 +222,7 @@ static void nas100d_power_handler(unsigned long data) ctrl_alt_del(); /* Change the state of the power LED to "blink" */ - gpio_line_set(NAS100D_LED_PWR_GPIO, IXP4XX_GPIO_LOW); + gpio_set_value(NAS100D_LED_PWR_GPIO, 0); } else { power_button_countdown = PBUTTON_HOLDDOWN_COUNT; } @@ -242,6 +239,33 @@ static irqreturn_t nas100d_reset_handler(int irq, void *dev_id) return IRQ_HANDLED; } +static int __init nas100d_gpio_init(void) +{ + if (!machine_is_nas100d()) + return 0; + + /* + * The power button on the Iomega NAS100d is on GPIO 14, but + * it cannot handle interrupts on that GPIO line. So we'll + * have to poll it with a kernel timer. + */ + + /* Request the power off GPIO */ + gpio_request(NAS100D_PO_GPIO, "power off"); + + /* Make sure that the power button GPIO is set up as an input */ + gpio_request(NAS100D_PB_GPIO, "power button"); + gpio_direction_input(NAS100D_PB_GPIO); + + /* Set the initial value for the power button IRQ handler */ + power_button_countdown = PBUTTON_HOLDDOWN_COUNT; + + mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500)); + + return 0; +} +device_initcall(nas100d_gpio_init); + static void __init nas100d_init(void) { uint8_t __iomem *f; @@ -278,19 +302,6 @@ static void __init nas100d_init(void) gpio_to_irq(NAS100D_RB_GPIO)); } - /* The power button on the Iomega NAS100d is on GPIO 14, but - * it cannot handle interrupts on that GPIO line. So we'll - * have to poll it with a kernel timer. - */ - - /* Make sure that the power button GPIO is set up as an input */ - gpio_line_config(NAS100D_PB_GPIO, IXP4XX_GPIO_IN); - - /* Set the initial value for the power button IRQ handler */ - power_button_countdown = PBUTTON_HOLDDOWN_COUNT; - - mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500)); - /* * Map in a portion of the flash and read the MAC address. * Since it is stored in BE in the flash itself, we need to diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c index 7e55236c26eab3dea60ddfa2ef9eaacad17bd597..ba5f1cda2a9de20b00daf1f2bfb3e3ec3df6fb86 100644 --- a/arch/arm/mach-ixp4xx/nslu2-setup.c +++ b/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -197,11 +197,8 @@ static void nslu2_power_off(void) { /* This causes the box to drop the power and go dead. */ - /* enable the pwr cntl gpio */ - gpio_line_config(NSLU2_PO_GPIO, IXP4XX_GPIO_OUT); - - /* do the deed */ - gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH); + /* enable the pwr cntl gpio and assert power off */ + gpio_direction_output(NSLU2_PO_GPIO, 1); } static irqreturn_t nslu2_power_handler(int irq, void *dev_id) @@ -223,6 +220,16 @@ static irqreturn_t nslu2_reset_handler(int irq, void *dev_id) return IRQ_HANDLED; } +static int __init nslu2_gpio_init(void) +{ + if (!machine_is_nslu2()) + return 0; + + /* Request the power off GPIO */ + return gpio_request(NSLU2_PO_GPIO, "power off"); +} +device_initcall(nslu2_gpio_init); + static void __init nslu2_timer_init(void) { /* The xtal on this machine is non-standard. */ diff --git a/drivers/input/misc/ixp4xx-beeper.c b/drivers/input/misc/ixp4xx-beeper.c index f34beb228d3689e055fb1c39ecc5fe41509f9fe8..17ccba88d636af381acd020a4d02b1f557babb64 100644 --- a/drivers/input/misc/ixp4xx-beeper.c +++ b/drivers/input/misc/ixp4xx-beeper.c @@ -20,6 +20,7 @@ #include #include #include +#include #include MODULE_AUTHOR("Alessandro Zummo "); @@ -35,15 +36,12 @@ static void ixp4xx_spkr_control(unsigned int pin, unsigned int count) spin_lock_irqsave(&beep_lock, flags); - if (count) { - gpio_line_config(pin, IXP4XX_GPIO_OUT); - gpio_line_set(pin, IXP4XX_GPIO_LOW); - + if (count) { + gpio_direction_output(pin, 0); *IXP4XX_OSRT2 = (count & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE; } else { - gpio_line_config(pin, IXP4XX_GPIO_IN); - gpio_line_set(pin, IXP4XX_GPIO_HIGH); - + gpio_direction_output(pin, 1); + gpio_direction_input(pin); *IXP4XX_OSRT2 = 0; } @@ -78,11 +76,13 @@ static int ixp4xx_spkr_event(struct input_dev *dev, unsigned int type, unsigned static irqreturn_t ixp4xx_spkr_interrupt(int irq, void *dev_id) { + unsigned int pin = (unsigned int) dev_id; + /* clear interrupt */ *IXP4XX_OSST = IXP4XX_OSST_TIMER_2_PEND; /* flip the beeper output */ - *IXP4XX_GPIO_GPOUTR ^= (1 << (unsigned int) dev_id); + gpio_set_value(pin, !gpio_get_value(pin)); return IRQ_HANDLED; } @@ -110,11 +110,15 @@ static int ixp4xx_spkr_probe(struct platform_device *dev) input_dev->sndbit[0] = BIT_MASK(SND_BELL) | BIT_MASK(SND_TONE); input_dev->event = ixp4xx_spkr_event; + err = gpio_request(dev->id, "ixp4-beeper"); + if (err) + goto err_free_device; + err = request_irq(IRQ_IXP4XX_TIMER2, &ixp4xx_spkr_interrupt, IRQF_NO_SUSPEND, "ixp4xx-beeper", (void *) dev->id); if (err) - goto err_free_device; + goto err_free_gpio; err = input_register_device(input_dev); if (err) @@ -126,6 +130,8 @@ static int ixp4xx_spkr_probe(struct platform_device *dev) err_free_irq: free_irq(IRQ_IXP4XX_TIMER2, (void *)dev->id); + err_free_gpio: + gpio_free(dev->id); err_free_device: input_free_device(input_dev); @@ -144,6 +150,7 @@ static int ixp4xx_spkr_remove(struct platform_device *dev) ixp4xx_spkr_control(pin, 0); free_irq(IRQ_IXP4XX_TIMER2, (void *)dev->id); + gpio_free(dev->id); return 0; } diff --git a/drivers/ptp/ptp_ixp46x.c b/drivers/ptp/ptp_ixp46x.c index d49b85164fd22e830f51e066337801134eef9354..4a08727fcaf39b55f409c005863603215c9b27cb 100644 --- a/drivers/ptp/ptp_ixp46x.c +++ b/drivers/ptp/ptp_ixp46x.c @@ -259,8 +259,15 @@ static struct ixp_clock ixp_clock; static int setup_interrupt(int gpio) { int irq; + int err; - gpio_line_config(gpio, IXP4XX_GPIO_IN); + err = gpio_request(gpio, "ixp4-ptp"); + if (err) + return err; + + err = gpio_direction_input(gpio); + if (err) + return err; irq = gpio_to_irq(gpio); diff --git a/drivers/staging/media/lirc/lirc_serial.c b/drivers/staging/media/lirc/lirc_serial.c index af08e677b60fd31cf94c687d85845838e7682e6a..f6bc4c91ab35f4737338e945a70b7a7fedf84f4c 100644 --- a/drivers/staging/media/lirc/lirc_serial.c +++ b/drivers/staging/media/lirc/lirc_serial.c @@ -67,7 +67,7 @@ #include #include #include - +#include #include #include #include @@ -321,7 +321,7 @@ static void on(void) * status LED and ground */ if (type == LIRC_NSLU2) { - gpio_line_set(NSLU2_LED_GRN, IXP4XX_GPIO_LOW); + gpio_set_value(NSLU2_LED_GRN, 0); return; } #endif @@ -335,7 +335,7 @@ static void off(void) { #ifdef CONFIG_LIRC_SERIAL_NSLU2 if (type == LIRC_NSLU2) { - gpio_line_set(NSLU2_LED_GRN, IXP4XX_GPIO_HIGH); + gpio_set_value(NSLU2_LED_GRN, 1); return; } #endif @@ -839,6 +839,16 @@ static int lirc_serial_probe(struct platform_device *dev) { int i, nlow, nhigh, result; +#ifdef CONFIG_LIRC_SERIAL_NSLU2 + /* This GPIO is used for a LED on the NSLU2 */ + result = devm_gpio_request(dev, NSLU2_LED_GRN, "lirc-serial"); + if (result) + return result; + result = gpio_direction_output(NSLU2_LED_GRN, 0); + if (result) + return result; +#endif + result = request_irq(irq, irq_handler, (share_irq ? IRQF_SHARED : 0), LIRC_DRIVER_NAME, (void *)&hardware);