diff --git a/arch/mips/netlogic/Kconfig b/arch/mips/netlogic/Kconfig index 3c05bf9e280ae5e66ea1e8ae3cfc96179a610d8b..e0873a31ebaace03336502d8bf57087fca3375b9 100644 --- a/arch/mips/netlogic/Kconfig +++ b/arch/mips/netlogic/Kconfig @@ -2,13 +2,22 @@ if NLM_XLP_BOARD || NLM_XLR_BOARD if NLM_XLP_BOARD config DT_XLP_EVP - bool "Built-in device tree for XLP EVP/SVP boards" + bool "Built-in device tree for XLP EVP boards" default y help - Add an FDT blob for XLP EVP and SVP boards into the kernel. + Add an FDT blob for XLP EVP boards into the kernel. This DTB will be used if the firmware does not pass in a DTB - pointer to the kernel. The corresponding DTS file is at - arch/mips/netlogic/dts/xlp_evp.dts + pointer to the kernel. The corresponding DTS file is at + arch/mips/netlogic/dts/xlp_evp.dts + +config DT_XLP_SVP + bool "Built-in device tree for XLP SVP boards" + default y + help + Add an FDT blob for XLP VP boards into the kernel. + This DTB will be used if the firmware does not pass in a DTB + pointer to the kernel. The corresponding DTS file is at + arch/mips/netlogic/dts/xlp_svp.dts config NLM_MULTINODE bool "Support for multi-chip boards" diff --git a/arch/mips/netlogic/dts/Makefile b/arch/mips/netlogic/dts/Makefile index d117d46413aa29d9b03806935c3d206f0e4f6b29..aecb6fa9a9c33968a187c872672d835c5ee39845 100644 --- a/arch/mips/netlogic/dts/Makefile +++ b/arch/mips/netlogic/dts/Makefile @@ -1 +1,2 @@ obj-$(CONFIG_DT_XLP_EVP) := xlp_evp.dtb.o +obj-$(CONFIG_DT_XLP_SVP) += xlp_svp.dtb.o diff --git a/arch/mips/netlogic/dts/xlp_evp.dts b/arch/mips/netlogic/dts/xlp_evp.dts index 7628b5464fc76161bf84f5192221b2e9716c1478..e14f4230806427bfb481d4e46d7a757cd2c82114 100644 --- a/arch/mips/netlogic/dts/xlp_evp.dts +++ b/arch/mips/netlogic/dts/xlp_evp.dts @@ -20,7 +20,7 @@ #address-cells = <2>; #size-cells = <1>; compatible = "simple-bus"; - ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG + ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG 1 0 0 0x16000000 0x01000000>; // GBU chipselects serial0: serial@30000 { diff --git a/arch/mips/netlogic/dts/xlp_svp.dts b/arch/mips/netlogic/dts/xlp_svp.dts new file mode 100644 index 0000000000000000000000000000000000000000..8af4bdbe5d993694a49fe614197088f93f65aa39 --- /dev/null +++ b/arch/mips/netlogic/dts/xlp_svp.dts @@ -0,0 +1,124 @@ +/* + * XLP3XX Device Tree Source for SVP boards + */ + +/dts-v1/; +/ { + model = "netlogic,XLP-SVP"; + compatible = "netlogic,xlp"; + #address-cells = <2>; + #size-cells = <2>; + + memory { + device_type = "memory"; + reg = <0 0x00100000 0 0x0FF00000 // 255M at 1M + 0 0x20000000 0 0xa0000000 // 2560M at 512M + 0 0xe0000000 0 0x40000000>; + }; + + soc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG + 1 0 0 0x16000000 0x01000000>; // GBU chipselects + + serial0: serial@30000 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0 0x30100 0xa00>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <133333333>; + interrupt-parent = <&pic>; + interrupts = <17>; + }; + serial1: serial@31000 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0 0x31100 0xa00>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <133333333>; + interrupt-parent = <&pic>; + interrupts = <18>; + }; + i2c0: ocores@32000 { + compatible = "opencores,i2c-ocores"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x32100 0xa00>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <32000000>; + interrupt-parent = <&pic>; + interrupts = <30>; + }; + i2c1: ocores@33000 { + compatible = "opencores,i2c-ocores"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x33100 0xa00>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <32000000>; + interrupt-parent = <&pic>; + interrupts = <31>; + + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + }; + + dtt@4c { + compatible = "national,lm90"; + reg = <0x4c>; + }; + }; + pic: pic@4000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <0 0x4000 0x200>; + }; + + nor_flash@1,0 { + compatible = "cfi-flash"; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <2>; + reg = <1 0 0x1000000>; + + partition@0 { + label = "x-loader"; + reg = <0x0 0x100000>; /* 1M */ + read-only; + }; + + partition@100000 { + label = "u-boot"; + reg = <0x100000 0x100000>; /* 1M */ + }; + + partition@200000 { + label = "kernel"; + reg = <0x200000 0x500000>; /* 5M */ + }; + + partition@700000 { + label = "rootfs"; + reg = <0x700000 0x800000>; /* 8M */ + }; + + partition@f00000 { + label = "env"; + reg = <0xf00000 0x100000>; /* 1M */ + read-only; + }; + }; + }; + + chosen { + bootargs = "console=ttyS0,115200 rdinit=/sbin/init"; + }; +}; diff --git a/arch/mips/netlogic/xlp/setup.c b/arch/mips/netlogic/xlp/setup.c index 4894d62043ac3639ce7844069995466ced103ea0..af319143b59187a4918805f737e2dcdb480845e7 100644 --- a/arch/mips/netlogic/xlp/setup.c +++ b/arch/mips/netlogic/xlp/setup.c @@ -56,7 +56,7 @@ uint64_t nlm_io_base; struct nlm_soc_info nlm_nodes[NLM_NR_NODES]; cpumask_t nlm_cpumask = CPU_MASK_CPU0; unsigned int nlm_threads_per_core; -extern u32 __dtb_start[]; +extern u32 __dtb_xlp_evp_begin[], __dtb_xlp_svp_begin[], __dtb_start[]; static void nlm_linux_exit(void) { @@ -82,8 +82,24 @@ void __init plat_mem_setup(void) * 64-bit, so convert pointer. */ fdtp = (void *)(long)fw_arg0; - if (!fdtp) - fdtp = __dtb_start; + if (!fdtp) { + switch (current_cpu_data.processor_id & 0xff00) { +#ifdef CONFIG_DT_XLP_SVP + case PRID_IMP_NETLOGIC_XLP3XX: + fdtp = __dtb_xlp_svp_begin; + break; +#endif +#ifdef CONFIG_DT_XLP_EVP + case PRID_IMP_NETLOGIC_XLP8XX: + fdtp = __dtb_xlp_evp_begin; + break; +#endif + default: + /* Pick a built-in if any, and hope for the best */ + fdtp = __dtb_start; + break; + } + } fdtp = phys_to_virt(__pa(fdtp)); early_init_devtree(fdtp); }