diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index b3196107afdbca5ff4a56de60fdfaf8e1b85e772..7a46a6563a589c47a9937beca5254f06fd588aa8 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -53,6 +53,7 @@ static struct twl4030_hsmmc_info omap3pandora_mmc[] = { .gpio_cd = -EINVAL, .gpio_wp = 127, .ext_clock = 1, + .transceiver = true, }, {} /* Terminator */ }; diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index b92313c8b84b543a879b5535f446d0d3085afd73..9c14324d8c6839985592579ff4563093c3d62d2f 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -214,6 +214,7 @@ static struct twl4030_hsmmc_info mmc[] __initdata = { .wires = 4, .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, + .transceiver = true, }, {} /* Terminator */ }; diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c index 84cac87537a3ec8aa20ed1c264e910e3bd27cf94..df1539e2cd0705b7ba6169d2da4eb5069294f568 100644 --- a/arch/arm/mach-omap2/mmc-twl4030.c +++ b/arch/arm/mach-omap2/mmc-twl4030.c @@ -44,6 +44,7 @@ #define VMMC2_315V 0x0c #define VMMC2_300V 0x0b #define VMMC2_285V 0x0a +#define VMMC2_280V 0x09 #define VMMC2_260V 0x08 #define VMMC2_185V 0x06 #define VMMC2_DEDICATED 0x2E @@ -166,56 +167,73 @@ static int twl_mmc_resume(struct device *dev, int slot) /* * Sets the MMC voltage in twl4030 */ + +#define MMC1_OCR (MMC_VDD_165_195 \ + |MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32) +#define MMC2_OCR (MMC_VDD_165_195 \ + |MMC_VDD_25_26|MMC_VDD_26_27|MMC_VDD_27_28 \ + |MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32) + static int twl_mmc_set_voltage(struct twl_mmc_controller *c, int vdd) { int ret; u8 vmmc, dev_grp_val; - switch (1 << vdd) { - case MMC_VDD_35_36: - case MMC_VDD_34_35: - case MMC_VDD_33_34: - case MMC_VDD_32_33: - case MMC_VDD_31_32: - case MMC_VDD_30_31: - if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP) - vmmc = VMMC1_315V; - else - vmmc = VMMC2_315V; - break; - case MMC_VDD_29_30: - if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP) - vmmc = VMMC1_315V; - else - vmmc = VMMC2_300V; - break; - case MMC_VDD_27_28: - case MMC_VDD_26_27: - if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP) - vmmc = VMMC1_285V; - else - vmmc = VMMC2_285V; - break; - case MMC_VDD_25_26: - case MMC_VDD_24_25: - case MMC_VDD_23_24: - case MMC_VDD_22_23: - case MMC_VDD_21_22: - case MMC_VDD_20_21: - if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP) - vmmc = VMMC1_285V; - else - vmmc = VMMC2_260V; - break; - case MMC_VDD_165_195: - if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP) + if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP) { + /* VMMC1: max 220 mA. And for 8-bit mode, + * VSIM: max 50 mA + */ + switch (1 << vdd) { + case MMC_VDD_165_195: vmmc = VMMC1_185V; - else + /* and VSIM_180V */ + break; + case MMC_VDD_28_29: + vmmc = VMMC1_285V; + /* and VSIM_280V */ + break; + case MMC_VDD_29_30: + case MMC_VDD_30_31: + vmmc = VMMC1_300V; + /* and VSIM_300V */ + break; + case MMC_VDD_31_32: + vmmc = VMMC1_315V; + /* error if VSIM needed */ + break; + default: + vmmc = 0; + break; + } + } else if (c->twl_vmmc_dev_grp == VMMC2_DEV_GRP) { + /* VMMC2: max 100 mA */ + switch (1 << vdd) { + case MMC_VDD_165_195: vmmc = VMMC2_185V; - break; - default: - vmmc = 0; - break; + break; + case MMC_VDD_25_26: + case MMC_VDD_26_27: + vmmc = VMMC2_260V; + break; + case MMC_VDD_27_28: + vmmc = VMMC2_280V; + break; + case MMC_VDD_28_29: + vmmc = VMMC2_285V; + break; + case MMC_VDD_29_30: + case MMC_VDD_30_31: + vmmc = VMMC2_300V; + break; + case MMC_VDD_31_32: + vmmc = VMMC2_315V; + break; + default: + vmmc = 0; + break; + } + } else { + return 0; } if (vmmc) @@ -242,6 +260,14 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on, struct twl_mmc_controller *c = &hsmmc[0]; struct omap_mmc_platform_data *mmc = dev->platform_data; + /* + * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the + * card using the same TWL VMMC1 supply (hsmmc[0]); OMAP has both + * 1.8V and 3.0V modes, controlled by the PBIAS register. + * + * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which + * is most naturally TWL VSIM; those pins also use PBIAS. + */ if (power_on) { if (cpu_is_omap2430()) { reg = omap_ctrl_readl(OMAP243X_CONTROL_DEVCONF1); @@ -298,6 +324,12 @@ static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vd struct twl_mmc_controller *c = &hsmmc[1]; struct omap_mmc_platform_data *mmc = dev->platform_data; + /* + * Assume TWL VMMC2 (hsmmc[1]) is used only to power the card ... OMAP + * VDDS is used to power the pins, optionally with a transceiver to + * support cards using voltages other than VDDS (1.8V nominal). When a + * transceiver is used, DAT3..7 are muxed as transceiver control pins. + */ if (power_on) { if (mmc->slots[0].internal_clock) { u32 reg; @@ -353,10 +385,6 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers) c->mmc, 1); mmc->slots[0].name = twl->name; mmc->nr_slots = 1; - mmc->slots[0].ocr_mask = MMC_VDD_165_195 | - MMC_VDD_26_27 | MMC_VDD_27_28 | - MMC_VDD_29_30 | - MMC_VDD_30_31 | MMC_VDD_31_32; mmc->slots[0].wires = c->wires; mmc->slots[0].internal_clock = !c->ext_clock; mmc->dma_mask = 0xffffffff; @@ -392,9 +420,14 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers) switch (c->mmc) { case 1: mmc->slots[0].set_power = twl_mmc1_set_power; + mmc->slots[0].ocr_mask = MMC1_OCR; break; case 2: mmc->slots[0].set_power = twl_mmc2_set_power; + if (c->transceiver) + mmc->slots[0].ocr_mask = MMC2_OCR; + else + mmc->slots[0].ocr_mask = MMC_VDD_165_195; break; default: pr_err("MMC%d configuration not supported!\n", c->mmc); diff --git a/arch/arm/mach-omap2/mmc-twl4030.h b/arch/arm/mach-omap2/mmc-twl4030.h index e1c8076400cabe86a49eafd398eb955bb2df7aa8..380dde7bcfe34e5e860c50d3a461fecfd0147bd1 100644 --- a/arch/arm/mach-omap2/mmc-twl4030.h +++ b/arch/arm/mach-omap2/mmc-twl4030.h @@ -9,9 +9,10 @@ struct twl4030_hsmmc_info { u8 mmc; /* controller 1/2/3 */ u8 wires; /* 1/4/8 wires */ + bool transceiver; /* MMC-2 option */ + bool ext_clock; /* use external pin for input clock */ int gpio_cd; /* or -EINVAL */ int gpio_wp; /* or -EINVAL */ - int ext_clock:1; /* use external pin for input clock */ }; #if defined(CONFIG_TWL4030_CORE) && \