提交 01ed875a 编写于 作者: L Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k/amiga: Fix "debug=mem"
  m68k/atari: Rename "scc" to "atari_scc"
  m68k: Uninline strchr()
......@@ -610,17 +610,17 @@ static void amiga_mem_console_write(struct console *co, const char *s,
static int __init amiga_savekmsg_setup(char *arg)
{
static struct resource debug_res = { .name = "Debug" };
if (!MACH_IS_AMIGA || strcmp(arg, "mem"))
goto done;
return 0;
if (!AMIGAHW_PRESENT(CHIP_RAM)) {
printk("Warning: no chipram present for debugging\n");
goto done;
if (amiga_chip_size < SAVEKMSG_MAXMEM) {
pr_err("Not enough chipram for debugging\n");
return -ENOMEM;
}
savekmsg = amiga_chip_alloc_res(SAVEKMSG_MAXMEM, &debug_res);
/* Just steal the block, the chipram allocator isn't functional yet */
amiga_chip_size -= SAVEKMSG_MAXMEM;
savekmsg = (void *)ZTWO_VADDR(CHIP_PHYSADDR + amiga_chip_size);
savekmsg->magic1 = SAVEKMSG_MAGIC1;
savekmsg->magic2 = SAVEKMSG_MAGIC2;
savekmsg->magicptr = ZTWO_PADDR(savekmsg);
......@@ -628,8 +628,6 @@ static int __init amiga_savekmsg_setup(char *arg)
amiga_console_driver.write = amiga_mem_console_write;
register_console(&amiga_console_driver);
done:
return 0;
}
......
......@@ -388,9 +388,9 @@ void __init atari_init_IRQ(void)
}
if (ATARIHW_PRESENT(SCC) && !atari_SCC_reset_done) {
scc.cha_a_ctrl = 9;
atari_scc.cha_a_ctrl = 9;
MFPDELAY();
scc.cha_a_ctrl = (char) 0xc0; /* hardware reset */
atari_scc.cha_a_ctrl = (char) 0xc0; /* hardware reset */
}
if (ATARIHW_PRESENT(SCU)) {
......
......@@ -315,7 +315,7 @@ void __init config_atari(void)
ATARIHW_SET(SCC_DMA);
printk("SCC_DMA ");
}
if (scc_test(&scc.cha_a_ctrl)) {
if (scc_test(&atari_scc.cha_a_ctrl)) {
ATARIHW_SET(SCC);
printk("SCC ");
}
......
......@@ -53,9 +53,9 @@ static inline void ata_scc_out(char c)
{
do {
MFPDELAY();
} while (!(scc.cha_b_ctrl & 0x04)); /* wait for tx buf empty */
} while (!(atari_scc.cha_b_ctrl & 0x04)); /* wait for tx buf empty */
MFPDELAY();
scc.cha_b_data = c;
atari_scc.cha_b_data = c;
}
static void atari_scc_console_write(struct console *co, const char *str,
......@@ -140,9 +140,9 @@ int atari_scc_console_wait_key(struct console *co)
{
do {
MFPDELAY();
} while (!(scc.cha_b_ctrl & 0x01)); /* wait for rx buf filled */
} while (!(atari_scc.cha_b_ctrl & 0x01)); /* wait for rx buf filled */
MFPDELAY();
return scc.cha_b_data;
return atari_scc.cha_b_data;
}
int atari_midi_console_wait_key(struct console *co)
......@@ -185,9 +185,9 @@ static void __init atari_init_mfp_port(int cflag)
#define SCC_WRITE(reg, val) \
do { \
scc.cha_b_ctrl = (reg); \
atari_scc.cha_b_ctrl = (reg); \
MFPDELAY(); \
scc.cha_b_ctrl = (val); \
atari_scc.cha_b_ctrl = (val); \
MFPDELAY(); \
} while (0)
......@@ -240,7 +240,7 @@ static void __init atari_init_scc_port(int cflag)
reg3 = (cflag & CSIZE) == CS8 ? 0xc0 : 0x40;
reg5 = (cflag & CSIZE) == CS8 ? 0x60 : 0x20 | 0x82 /* assert DTR/RTS */;
(void)scc.cha_b_ctrl; /* reset reg pointer */
(void)atari_scc.cha_b_ctrl; /* reset reg pointer */
SCC_WRITE(9, 0xc0); /* reset */
LONG_DELAY(); /* extra delay after WR9 access */
SCC_WRITE(4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03)
......
......@@ -449,7 +449,7 @@ struct SCC
u_char char_dummy3;
u_char cha_b_data;
};
# define scc ((*(volatile struct SCC*)SCC_BAS))
# define atari_scc ((*(volatile struct SCC*)SCC_BAS))
/* The ESCC (Z85230) in an Atari ST. The channels are reversed! */
# define st_escc ((*(volatile struct SCC*)0xfffffa31))
......
......@@ -81,18 +81,6 @@ static inline char *strncpy(char *dest, const char *src, size_t n)
strcpy(__d + strlen(__d), (s)); \
})
#define __HAVE_ARCH_STRCHR
static inline char *strchr(const char *s, int c)
{
char sc, ch = c;
for (; (sc = *s++) != ch; ) {
if (!sc)
return NULL;
}
return (char *)s - 1;
}
#ifndef CONFIG_COLDFIRE
#define __HAVE_ARCH_STRCMP
static inline int strcmp(const char *cs, const char *ct)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册