setup.c 12.9 KB
Newer Older
1
/*
2
 * arch/xtensa/kernel/setup.c
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
 *
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file "COPYING" in the main directory of this archive
 * for more details.
 *
 * Copyright (C) 1995  Linus Torvalds
 * Copyright (C) 2001 - 2005  Tensilica Inc.
 *
 * Chris Zankel	<chris@zankel.net>
 * Joe Taylor	<joe@tensilica.com, joetylr@yahoo.com>
 * Kevin Chea
 * Marc Gauthier<marc@tensilica.com> <marc@alumni.uwaterloo.ca>
 */

#include <linux/errno.h>
#include <linux/init.h>
19
#include <linux/mm.h>
20
#include <linux/proc_fs.h>
21
#include <linux/screen_info.h>
22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43
#include <linux/bootmem.h>
#include <linux/kernel.h>

#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
# include <linux/console.h>
#endif

#ifdef CONFIG_RTC
# include <linux/timex.h>
#endif

#ifdef CONFIG_PROC_FS
# include <linux/seq_file.h>
#endif

#include <asm/bootparam.h>
#include <asm/pgtable.h>
#include <asm/processor.h>
#include <asm/timex.h>
#include <asm/platform.h>
#include <asm/page.h>
#include <asm/setup.h>
C
Chris Zankel 已提交
44
#include <asm/param.h>
M
Max Filippov 已提交
45
#include <asm/traps.h>
46

47 48
#include <platform/hardware.h>

49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72
#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
struct screen_info screen_info = { 0, 24, 0, 0, 0, 80, 0, 0, 0, 24, 1, 16};
#endif

#ifdef CONFIG_BLK_DEV_FD
extern struct fd_ops no_fd_ops;
struct fd_ops *fd_ops;
#endif

extern struct rtc_ops no_rtc_ops;
struct rtc_ops *rtc_ops;

#ifdef CONFIG_BLK_DEV_INITRD
extern void *initrd_start;
extern void *initrd_end;
int initrd_is_mapped = 0;
extern int initrd_below_start_ok;
#endif

unsigned char aux_device_present;
extern unsigned long loops_per_jiffy;

/* Command line specified as configuration option. */

73
static char __initdata command_line[COMMAND_LINE_SIZE];
74 75 76 77 78 79 80

#ifdef CONFIG_CMDLINE_BOOL
static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
#endif

sysmem_info_t __initdata sysmem;

J
Johannes Weiner 已提交
81
#ifdef CONFIG_MMU
82
extern void init_mmu(void);
J
Johannes Weiner 已提交
83 84 85 86 87
#else
static inline void init_mmu(void) { }
#endif

extern void zones_init(void);
88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103

/*
 * Boot parameter parsing.
 *
 * The Xtensa port uses a list of variable-sized tags to pass data to
 * the kernel. The first tag must be a BP_TAG_FIRST tag for the list
 * to be recognised. The list is terminated with a zero-sized
 * BP_TAG_LAST tag.
 */

typedef struct tagtable {
	u32 tag;
	int (*parse)(const bp_tag_t*);
} tagtable_t;

#define __tagtable(tag, fn) static tagtable_t __tagtable_##fn 		\
M
Max Filippov 已提交
104
	__attribute__((used, section(".taglist"))) = { tag, fn }
105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123

/* parse current tag */

static int __init parse_tag_mem(const bp_tag_t *tag)
{
	meminfo_t *mi = (meminfo_t*)(tag->data);

	if (mi->type != MEMORY_TYPE_CONVENTIONAL)
		return -1;

	if (sysmem.nr_banks >= SYSMEM_BANKS_MAX) {
		printk(KERN_WARNING
		       "Ignoring memory bank 0x%08lx size %ldKB\n",
		       (unsigned long)mi->start,
		       (unsigned long)mi->end - (unsigned long)mi->start);
		return -EINVAL;
	}
	sysmem.bank[sysmem.nr_banks].type  = mi->type;
	sysmem.bank[sysmem.nr_banks].start = PAGE_ALIGN(mi->start);
M
Max Filippov 已提交
124
	sysmem.bank[sysmem.nr_banks].end   = mi->end & PAGE_MASK;
125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238
	sysmem.nr_banks++;

	return 0;
}

__tagtable(BP_TAG_MEMORY, parse_tag_mem);

#ifdef CONFIG_BLK_DEV_INITRD

static int __init parse_tag_initrd(const bp_tag_t* tag)
{
	meminfo_t* mi;
	mi = (meminfo_t*)(tag->data);
	initrd_start = (void*)(mi->start);
	initrd_end = (void*)(mi->end);

	return 0;
}

__tagtable(BP_TAG_INITRD, parse_tag_initrd);

#endif /* CONFIG_BLK_DEV_INITRD */

static int __init parse_tag_cmdline(const bp_tag_t* tag)
{
	strncpy(command_line, (char*)(tag->data), COMMAND_LINE_SIZE);
	command_line[COMMAND_LINE_SIZE - 1] = '\0';
	return 0;
}

__tagtable(BP_TAG_COMMAND_LINE, parse_tag_cmdline);

static int __init parse_bootparam(const bp_tag_t* tag)
{
	extern tagtable_t __tagtable_begin, __tagtable_end;
	tagtable_t *t;

	/* Boot parameters must start with a BP_TAG_FIRST tag. */

	if (tag->id != BP_TAG_FIRST) {
		printk(KERN_WARNING "Invalid boot parameters!\n");
		return 0;
	}

	tag = (bp_tag_t*)((unsigned long)tag + sizeof(bp_tag_t) + tag->size);

	/* Parse all tags. */

	while (tag != NULL && tag->id != BP_TAG_LAST) {
	 	for (t = &__tagtable_begin; t < &__tagtable_end; t++) {
			if (tag->id == t->tag) {
				t->parse(tag);
				break;
			}
		}
		if (t == &__tagtable_end)
			printk(KERN_WARNING "Ignoring tag "
			       "0x%08x\n", tag->id);
		tag = (bp_tag_t*)((unsigned long)(tag + 1) + tag->size);
	}

	return 0;
}

/*
 * Initialize architecture. (Early stage)
 */

void __init init_arch(bp_tag_t *bp_start)
{
	sysmem.nr_banks = 0;

#ifdef CONFIG_CMDLINE_BOOL
	strcpy(command_line, default_command_line);
#endif

	/* Parse boot parameters */

        if (bp_start)
	  parse_bootparam(bp_start);

	if (sysmem.nr_banks == 0) {
		sysmem.nr_banks = 1;
		sysmem.bank[0].start = PLATFORM_DEFAULT_MEM_START;
		sysmem.bank[0].end = PLATFORM_DEFAULT_MEM_START
				     + PLATFORM_DEFAULT_MEM_SIZE;
	}

	/* Early hook for platforms */

	platform_init(bp_start);

	/* Initialize MMU. */

	init_mmu();
}

/*
 * Initialize system. Setup memory and reserve regions.
 */

extern char _end;
extern char _stext;
extern char _WindowVectors_text_start;
extern char _WindowVectors_text_end;
extern char _DebugInterruptVector_literal_start;
extern char _DebugInterruptVector_text_end;
extern char _KernelExceptionVector_literal_start;
extern char _KernelExceptionVector_text_end;
extern char _UserExceptionVector_literal_start;
extern char _UserExceptionVector_text_end;
extern char _DoubleExceptionVector_literal_start;
extern char _DoubleExceptionVector_text_end;

M
Max Filippov 已提交
239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355

#ifdef CONFIG_S32C1I_SELFTEST
#if XCHAL_HAVE_S32C1I

static int __initdata rcw_word, rcw_probe_pc, rcw_exc;

/*
 * Basic atomic compare-and-swap, that records PC of S32C1I for probing.
 *
 * If *v == cmp, set *v = set.  Return previous *v.
 */
static inline int probed_compare_swap(int *v, int cmp, int set)
{
	int tmp;

	__asm__ __volatile__(
			"	movi	%1, 1f\n"
			"	s32i	%1, %4, 0\n"
			"	wsr	%2, scompare1\n"
			"1:	s32c1i	%0, %3, 0\n"
			: "=a" (set), "=&a" (tmp)
			: "a" (cmp), "a" (v), "a" (&rcw_probe_pc), "0" (set)
			: "memory"
			);
	return set;
}

/* Handle probed exception */

void __init do_probed_exception(struct pt_regs *regs, unsigned long exccause)
{
	if (regs->pc == rcw_probe_pc) {	/* exception on s32c1i ? */
		regs->pc += 3;		/* skip the s32c1i instruction */
		rcw_exc = exccause;
	} else {
		do_unhandled(regs, exccause);
	}
}

/* Simple test of S32C1I (soc bringup assist) */

void __init check_s32c1i(void)
{
	int n, cause1, cause2;
	void *handbus, *handdata, *handaddr; /* temporarily saved handlers */

	rcw_probe_pc = 0;
	handbus  = trap_set_handler(EXCCAUSE_LOAD_STORE_ERROR,
			do_probed_exception);
	handdata = trap_set_handler(EXCCAUSE_LOAD_STORE_DATA_ERROR,
			do_probed_exception);
	handaddr = trap_set_handler(EXCCAUSE_LOAD_STORE_ADDR_ERROR,
			do_probed_exception);

	/* First try an S32C1I that does not store: */
	rcw_exc = 0;
	rcw_word = 1;
	n = probed_compare_swap(&rcw_word, 0, 2);
	cause1 = rcw_exc;

	/* took exception? */
	if (cause1 != 0) {
		/* unclean exception? */
		if (n != 2 || rcw_word != 1)
			panic("S32C1I exception error");
	} else if (rcw_word != 1 || n != 1) {
		panic("S32C1I compare error");
	}

	/* Then an S32C1I that stores: */
	rcw_exc = 0;
	rcw_word = 0x1234567;
	n = probed_compare_swap(&rcw_word, 0x1234567, 0xabcde);
	cause2 = rcw_exc;

	if (cause2 != 0) {
		/* unclean exception? */
		if (n != 0xabcde || rcw_word != 0x1234567)
			panic("S32C1I exception error (b)");
	} else if (rcw_word != 0xabcde || n != 0x1234567) {
		panic("S32C1I store error");
	}

	/* Verify consistency of exceptions: */
	if (cause1 || cause2) {
		pr_warn("S32C1I took exception %d, %d\n", cause1, cause2);
		/* If emulation of S32C1I upon bus error gets implemented,
		   we can get rid of this panic for single core (not SMP) */
		panic("S32C1I exceptions not currently supported");
	}
	if (cause1 != cause2)
		panic("inconsistent S32C1I exceptions");

	trap_set_handler(EXCCAUSE_LOAD_STORE_ERROR, handbus);
	trap_set_handler(EXCCAUSE_LOAD_STORE_DATA_ERROR, handdata);
	trap_set_handler(EXCCAUSE_LOAD_STORE_ADDR_ERROR, handaddr);
}

#else /* XCHAL_HAVE_S32C1I */

/* This condition should not occur with a commercially deployed processor.
   Display reminder for early engr test or demo chips / FPGA bitstreams */
void __init check_s32c1i(void)
{
	pr_warn("Processor configuration lacks atomic compare-and-swap support!\n");
}

#endif /* XCHAL_HAVE_S32C1I */
#else /* CONFIG_S32C1I_SELFTEST */

void __init check_s32c1i(void)
{
}

#endif /* CONFIG_S32C1I_SELFTEST */


356 357 358 359 360
void __init setup_arch(char **cmdline_p)
{
	extern int mem_reserve(unsigned long, unsigned long, int);
	extern void bootmem_init(void);

361 362
	memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
	boot_command_line[COMMAND_LINE_SIZE-1] = '\0';
363 364
	*cmdline_p = command_line;

M
Max Filippov 已提交
365 366
	check_s32c1i();

367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401
	/* Reserve some memory regions */

#ifdef CONFIG_BLK_DEV_INITRD
	if (initrd_start < initrd_end) {
		initrd_is_mapped = mem_reserve(__pa(initrd_start),
					       __pa(initrd_end), 0);
		initrd_below_start_ok = 1;
 	} else {
		initrd_start = 0;
	}
#endif

	mem_reserve(__pa(&_stext),__pa(&_end), 1);

	mem_reserve(__pa(&_WindowVectors_text_start),
		    __pa(&_WindowVectors_text_end), 0);

	mem_reserve(__pa(&_DebugInterruptVector_literal_start),
		    __pa(&_DebugInterruptVector_text_end), 0);

	mem_reserve(__pa(&_KernelExceptionVector_literal_start),
		    __pa(&_KernelExceptionVector_text_end), 0);

	mem_reserve(__pa(&_UserExceptionVector_literal_start),
		    __pa(&_UserExceptionVector_text_end), 0);

	mem_reserve(__pa(&_DoubleExceptionVector_literal_start),
		    __pa(&_DoubleExceptionVector_text_end), 0);

	bootmem_init();

	platform_setup(cmdline_p);


	paging_init();
J
Johannes Weiner 已提交
402
	zones_init();
403 404 405 406 407 408 409 410 411

#ifdef CONFIG_VT
# if defined(CONFIG_VGA_CONSOLE)
	conswitchp = &vga_con;
# elif defined(CONFIG_DUMMY_CONSOLE)
	conswitchp = &dummy_con;
# endif
#endif

412
#ifdef CONFIG_PCI
413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444
	platform_pcibios_init();
#endif
}

void machine_restart(char * cmd)
{
	platform_restart();
}

void machine_halt(void)
{
	platform_halt();
	while (1);
}

void machine_power_off(void)
{
	platform_power_off();
	while (1);
}
#ifdef CONFIG_PROC_FS

/*
 * Display some core information through /proc/cpuinfo.
 */

static int
c_show(struct seq_file *f, void *slot)
{
	/* high-level stuff */
	seq_printf(f,"processor\t: 0\n"
		     "vendor_id\t: Tensilica\n"
445
		     "model\t\t: Xtensa " XCHAL_HW_VERSION_NAME "\n"
446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502
		     "core ID\t\t: " XCHAL_CORE_ID "\n"
		     "build ID\t: 0x%x\n"
		     "byte order\t: %s\n"
 		     "cpu MHz\t\t: %lu.%02lu\n"
		     "bogomips\t: %lu.%02lu\n",
		     XCHAL_BUILD_UNIQUE_ID,
		     XCHAL_HAVE_BE ?  "big" : "little",
		     CCOUNT_PER_JIFFY/(1000000/HZ),
		     (CCOUNT_PER_JIFFY/(10000/HZ)) % 100,
		     loops_per_jiffy/(500000/HZ),
		     (loops_per_jiffy/(5000/HZ)) % 100);

	seq_printf(f,"flags\t\t: "
#if XCHAL_HAVE_NMI
		     "nmi "
#endif
#if XCHAL_HAVE_DEBUG
		     "debug "
# if XCHAL_HAVE_OCD
		     "ocd "
# endif
#endif
#if XCHAL_HAVE_DENSITY
	    	     "density "
#endif
#if XCHAL_HAVE_BOOLEANS
		     "boolean "
#endif
#if XCHAL_HAVE_LOOPS
		     "loop "
#endif
#if XCHAL_HAVE_NSA
		     "nsa "
#endif
#if XCHAL_HAVE_MINMAX
		     "minmax "
#endif
#if XCHAL_HAVE_SEXT
		     "sext "
#endif
#if XCHAL_HAVE_CLAMPS
		     "clamps "
#endif
#if XCHAL_HAVE_MAC16
		     "mac16 "
#endif
#if XCHAL_HAVE_MUL16
		     "mul16 "
#endif
#if XCHAL_HAVE_MUL32
		     "mul32 "
#endif
#if XCHAL_HAVE_MUL32_HIGH
		     "mul32h "
#endif
#if XCHAL_HAVE_FP
		     "fpu "
503 504 505
#endif
#if XCHAL_HAVE_S32C1I
		     "s32c1i "
506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537
#endif
		     "\n");

	/* Registers. */
	seq_printf(f,"physical aregs\t: %d\n"
		     "misc regs\t: %d\n"
		     "ibreak\t\t: %d\n"
		     "dbreak\t\t: %d\n",
		     XCHAL_NUM_AREGS,
		     XCHAL_NUM_MISC_REGS,
		     XCHAL_NUM_IBREAK,
		     XCHAL_NUM_DBREAK);


	/* Interrupt. */
	seq_printf(f,"num ints\t: %d\n"
		     "ext ints\t: %d\n"
		     "int levels\t: %d\n"
		     "timers\t\t: %d\n"
		     "debug level\t: %d\n",
		     XCHAL_NUM_INTERRUPTS,
		     XCHAL_NUM_EXTINTERRUPTS,
		     XCHAL_NUM_INTLEVELS,
		     XCHAL_NUM_TIMERS,
		     XCHAL_DEBUGLEVEL);

	/* Cache */
	seq_printf(f,"icache line size: %d\n"
		     "icache ways\t: %d\n"
		     "icache size\t: %d\n"
		     "icache flags\t: "
#if XCHAL_ICACHE_LINE_LOCKABLE
538
		     "lock "
539 540 541 542 543 544 545
#endif
		     "\n"
		     "dcache line size: %d\n"
		     "dcache ways\t: %d\n"
		     "dcache size\t: %d\n"
		     "dcache flags\t: "
#if XCHAL_DCACHE_IS_WRITEBACK
546
		     "writeback "
547 548
#endif
#if XCHAL_DCACHE_LINE_LOCKABLE
549
		     "lock "
550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581
#endif
		     "\n",
		     XCHAL_ICACHE_LINESIZE,
		     XCHAL_ICACHE_WAYS,
		     XCHAL_ICACHE_SIZE,
		     XCHAL_DCACHE_LINESIZE,
		     XCHAL_DCACHE_WAYS,
		     XCHAL_DCACHE_SIZE);

	return 0;
}

/*
 * We show only CPU #0 info.
 */
static void *
c_start(struct seq_file *f, loff_t *pos)
{
	return (void *) ((*pos == 0) ? (void *)1 : NULL);
}

static void *
c_next(struct seq_file *f, void *v, loff_t *pos)
{
	return NULL;
}

static void
c_stop(struct seq_file *f, void *v)
{
}

582
const struct seq_operations cpuinfo_op =
583 584 585 586 587 588 589 590 591
{
	start:  c_start,
	next:   c_next,
	stop:   c_stop,
	show:   c_show
};

#endif /* CONFIG_PROC_FS */